Академический Документы
Профессиональный Документы
Культура Документы
14 Held for Question Paper Leak in Police Recruitment Test Prime Suspect Apprehended in AIIMS Question Paper Leak
Date: 3/31/2006 Upon hearing these kind of news one is forced to think about the various means and options to contribute in the effort to stop the corruption to a certain extent by putting a stop to the leakage of the paper with the help of technology. This will not only strengthen the society but will also give a fair chance to everyone to compete and give way to better quality of education to all. We propose a mechanism where the Question papers will be sent to the examination centers in a sealed electronic box, which cannot be opened before the stipulated time. The device will then be sent a message from the base station which will then request for a password to be entered. When the Password and timing matches, the box will open through a motorized mechanism. The box will look as illustrated below:
16 X 2 Display
12 Keys keypad
RFID Reader
This will enable the papers to be locked and sealed till the point in time when the papers need to be brought out for the distribution to the students in the examination hall. The box will have a mechanism to detect any sort of unauthorized tampering with the help of a box tampering sensor. This will detect tampering before the stipulated time. Once the Box tampering is detected it will raise an alarm and set a bit in the memory,
Examination Question Paper Leakage Protection Mechanism with the information about the box tampering. Once the boxes are returned to the examination center or to the Base station for correction it will then be connected to the PC to detect any tampering which might have taken place earlier. Also the box mechanism will be connected with an RFID reader and a memory module. The Box will be programmed in such a way that only the selected authorized personnel will be able to open it. The authorized personnel will be requested to enter the session password to enable the mechanism to open the box after the RFID card is swiped and accepted.. Further more the Examination centers will be equipped with Displays which will constantly display the timings and the instructions which will be sent from the Base station. If required, then Periodic alarms can be raised to inform the students for the time left. In this system of conducting exams, once the exam is finished, the answer sheets are required to be packed again inside the boxes and after entering the correct password the authorized personnel will then be able to seal the boxes. Once locked they can only be opened at the evaluation centers where these boxes will be sent. Once again the same procedure about sending the message from the base station when the evaluation begins and the time at which they need to be sealed and sent back will be repeated. We feel that employing this methodology will bring down the malpractices involved with the question paper leakage before the exam and answer sheets being exchanged or modified during the transit to and from the examination centre to the evaluation centers. Areas Covered: In this project we will be covering and understand the following topics: 8051 Hardware Designing Coding in 8051 Assembly PCB designing and concepts Controlling and driving mechanism of Relays to control External Devices. Motor controlling mechanisms
Examination Question Paper Leakage Protection Mechanism Keypad and LCD Displays PC Connectivity Serial and Parallel Ports VB Coding strategies Encryption techniques etc. Future enhancements: In future we can even automate the marking and result announcement through SMS etc.
Block Diagram:
Encrypted Data
Antenna
MAX 232
MicroController 89C51
Wireless Transmitter
Antenna
Wireless Receiver