Академический Документы
Профессиональный Документы
Культура Документы
Step No.
1
Hazards Unauthorized work Conflicting activities Invalid permit Lack of competency Lack or poor communication Haste or shortcut
Control Measures/ Preventive Measures A certified PTW applicant shall obtain PTW from the concerned authorities Make sure that there are no conflicting activities near the worksite before starting the job Get the permit validated for the specific day Supervisor must ensure that all work activities are carried out by competent personnel Conduct Toolbox meeting, review the Method statement and Job safety analysis to all craftsmen involved in the work activities. Responsible person will conduct inspection, monitor the work activities and have to ensure safety standards and procedures are strictly adhered to. Make sure everybody is wearing proper PPE. Ensure the use of rated Blinds. Tools used must be appropriate for the job Use proper lifting practices
Supervisor
Company Logo
Step No.
Job Steps
Control Measures/ Preventive Measures A single person shall not carry more than 20 KG Protect hands when using bars. Consider bar slipping, pinch points.
Bend the knees slightly, one foot in front of the other. Conduct gas test before & during the activity if required by the PTW
Responsible
Toxic Gas. Flammable Gas. Sharp Objects. 3 Fit-up Falling Objects. Injury. Fall from Heights.
Use breathing Apparatus for Blinding. Control of ignition sources etc., hand tools. Continuous gas monitoring. Handling of Gaskets (sharp edges) as per procedure. Proper PPE. Proper tools. Certified Scaffolding. Deployment of exp personnel. Certified Riggers. Certified Lifting Personnel.
Essential personnel only at worksite. Proper PPE. Proper tools. Certified Scaffolding. Deployment of exp personnel.
Company Logo
Step No.
Job Steps
Hazards Congestion
Control Measures/ Preventive Measures Certified Riggers. Certified Lifting Personnel. Essential personnel only at worksite.
Responsible