Академический Документы
Профессиональный Документы
Культура Документы
STOPPING PLUGS
Size Metric M16 M20 M25 M32 M40 M50 M63 M75 NPT N/A - 1 1 1 2 2 3 Allen Key Size 10 10 10 10 10 10 10 10
475 - This Stopping Plug is inserted from the OUTSIDE of the enclosure/equipment 477 - This Stopping Plug is inserted from the INSIDE of the enclosure/equipment
Step 1 Ensure thread type and size are compatible with enclosure thread, Where ingress protection of greater than IP54 is required, the use of a suitable non-setting thread sealant is recommended.
Step 2 Fully tighten stopping plug into the enclosure/equipment using the appropriate hexagon allen key For parallel threaded stopping plugs the number of threads engaged must be 5 with an axial engagement of 8mm. For tapered threaded stopping plugs, the plug should be wrench tight in the enclosure.
Special Condition for Safe Use: The stopping plugs must not be used with a thread adaptor / reducer in flameproof applications.
Brass, Nickel Plated Brass, Stainless Steel and Aluminium. Brass, Nickel Plated Brass and Stainless Steel.
Connection Solutions
Hawke International is a division of Hubbell Ltd. Registered No. 669157 in England. Registered Office: Mitre House, 160 Aldersgate Street, London EC1A 4DD. A member of the Hubbell Group of Companies
Hawke International UK Office Oxford Street West, Ashton-Under-Lyne, Lancashire OL7 0NA. UK
www.ehawke.com
Sales: +44 (0) 161 830 6698 Technical: +44 (0) 161 830 6697 Fax: +44 (0) 161 830 6648 E-mail: sales@ehawke.com