Академический Документы
Профессиональный Документы
Культура Документы
similar equipment. Equally important in all machineries used onboard The chosen machinery here is boiler
are controlling or manipulating the boiler These are several alarm system operational equipments:1. 2.
3.
Flame safeguard
from a conductivity electrode, for continuous monitoring of the conductivity in feed and boiler water
1a RED led 1b GREEN led 2 switch point adjuster 3 measuring range switch 4 adjuster for temperature
compensation 5 screw to fasten the cover base
The ultrasonic sensor contains two piezoelectric crystals. A high frequency signal (3.7 MHz) generated by the control unit is transmitted to one piezoelectric crystal by coaxial cable. This crystal converts the electrical signal into an ultrasonic oscillation. The sensor design allows the ultrasonic oscillation to pass from the transmitter crystal to the receiver piezoelectric crystal. There is a gap between the transmitter and receiver When the gap is in the liquid the signal reaches the receiver due to low ultrasonic attenuation of the liquid if it is in oil it is vice versa.
operation, the supply of fuel is always interrupted instantaneously. The unit can be reset by pushing the reset button on the flame safeguard. Any flame signal - in normal operation or a faulty flame signal - is signalled by the indicator lamp. The switching function needed to enter the flame signal to the control circuit of the burner system is provided by the flame relay FR of the flame safeguard.