Академический Документы
Профессиональный Документы
Культура Документы
; ; ; ;
IMPORTANT:
This file is not to be modified except as directed by Kofax Image Products technical support.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; The ScannerNames, DriverType, and DriverName sections ; provide the mapping from scanner name to the ISIS driver name ; or TWAIN scanner model used to support the scanner selected ; during the SVRS install. ; Right now, the scanner names are also hard coded in SETUP.RUL. ; The two sets of names have to match exactly (except order). ; These sections are read by the SvScnCfg.exe program launched ; by the installation script SETUP.RUL. ; [ScannerNames] 1=HP Scanjet 7000 2=HP Scanjet 7500 3=HP Scanjet 7800 4=HP Scanjet 8290 5=HP Scanjet 8300 6=HP Scanjet 9000 7=HP Scanjet N7710 8=HP Scanjet N8400 9=HP Scanjet N9120
[DriverType] 1=ISIS 2=ISIS 3=ISIS 4=ISIS 5=ISIS 6=ISIS 7=ISIS 8=ISIS 9=ISIS
[DriverName] 1=hp7000sf.pxn 2=HP7500.pxn 3=hp7800.pxn 4=hp8290.pxn 5=hp8300.pxn 6=HP9000.PXN 7=hpn7710.pxn 8=HPN8400.pxn 9=hpn9120.pxn
[DriverWarning] 1=0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; ; Format of section name: ; [<scanner name>-VRS-TRAP-ACTION] ; ; ; ; ; ; ; ; These items are used to override entries in Default traps.cts. ; These sections are read by the SvScnCfg.exe program launched NOTE: <scanner name> is similar but not the same string as the <scanner id tag> used elsewhere in this file. where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Bell & Howell 8000 B/C-VRS-TRAP-ACTION] <scanner name>-VRS-TRAP-ACTION sections: <scanner name>-VRS-TRAP-THRESHOLD sections:
; by the installation script SETUP.RUL. ; [Bell & Howell 8000 B/C-VRS-TRAP-ACTION] Trap-BrightnessTooLow=1 ;Ignore Error
[Bell & Howell 8000 B/C-VRS-TRAP-THRESHOLD] Trap-ForExample=6 Trap-BrightnessTooLow=35 ; (example for testing only)
[Bell & Howell 8000 B/C (non-interactive mode)-VRS-TRAP-ACTION] Trap-BrightnessTooLow=1 ;Ignore Error
; Only the items that are different from [Default Scanner-VRSREGSET] [Bell & Howell 8000 B/C-VRSREGSET] Item1=OEMCODE_BELL+HOWELL Item2=OEMSUBCODE_BELL+HOWELL
; Only the items that are different from [Default Scanner-VRSREGSET] [Bell & Howell 8000 B/C (non-interactive mode)-VRSREGSET] Item1=OEMCODE_BELL+HOWELL Item2=OEMSUBCODE_BELL+HOWELL Item3=QC_Disabled Item4=HW_WarningsOff
; Phoenix scanners do not have support for auto resolve ; [Kodak i600 Series-VRS-TRAP-ACTION] Trap-PaperJam=2 Trap-CoverOpen=2 Trap-OutOfPaper=2 Trap-MultifeedDetected=2 Trap-BrightnessTooLow=1 ;Return Error ;Return Error ;Return Error ;Return Error ;Ignore Error
; ; Everything in [Default Scanner-VRSREGSET] is written to the registry. ; After that, any scanner-specific overrides are done. ; Search for VRSREGSET elsewhere in this file to see examples of ; scanner-specific registry overrides. ; [Default Scanner-VRSREGSET] Item1=OEMCODE_SVRS Item2=OEMSUBCODE_SVRS Item3=QC_OnErrors Item4=HW_WarningsOn
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu fi-4990C-VRSREGSET] Item1=OEMCODE_FUJITSU Item2=OEMSUBCODE_fi4990 Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu fi-4860C-VRSREGSET] Item1=OEMCODE_FUJITSU Item2=OEMSUBCODE_fi4860 Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu M4097D (Hardware)-VRSREGSET] Item1=OEMCODE_FUJITSU Item2=OEMSUBCODE_FUJITSU Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu M4099D (Hardware)-VRSREGSET] Item1=OEMCODE_FUJITSU Item2=OEMSUBCODE_FUJITSU Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu fi-4750C (Hardware)-VRSREGSET] Item1=OEMCODE_FUJITSU Item2=OEMSUBCODE_FUJITSU Item3=QC_Disabled
; Only the items that are different from [Default Scanner-VRSREGSET] [Fujitsu fi-4750L (Hardware)-VRSREGSET] Item1=OEMCODE_FUJITSU
Item2=OEMSUBCODE_FUJITSU Item3=QC_Disabled
; This is for Fujitsu HVRS only (not SVRS) [OEMCODE_FUJITSU] Type=Registry MainKey=HKEY_LOCAL_MACHINE SubKey=Software\Kofax\Condor Name=OEMCODE ValueType=REG_SZ Value=FUJITSU
; This is for Fujitsu HVRS only (not SVRS) [OEMSUBCODE_FUJITSU] Type=Registry MainKey=HKEY_LOCAL_MACHINE SubKey=Software\Kofax\Condor Name=OEMSUBCODE ValueType=REG_SZ Value=FUJITSU
Value=fi4990
; Only the items that are different from [Default Scanner-VRSREGSET] [HP Scanjet 8290-VRSREGSET] Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET] [HP Scanjet 7800-VRSREGSET] Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET] [HP Scanjet 8300-VRSREGSET] Item1=OEMSUBCODE_HP
; Only the items that are different from [Default Scanner-VRSREGSET] [HP Scanjet N9120-VRSREGSET] Item1=OEMSUBCODE_HP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>-VRSSET] ; ; ; ; ; ; ; ; These items are used to override entries in Default settings.cps. ; These sections are read by the SvScnCfg.exe program launched ; by the installation script SETUP.RUL. ; NOTE: <scanner name> is similar but not the same string as the <scanner id tag> used elsewhere in this file. where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-VRSSET] <scanner name>-VRSSET sections:
[Epson GT-10000+-VRSSET]
[Fujitsu fi-4860C-VRSSET]
;VRS Contrast
[HP ScanJet 6250C-VRSSET] EdgeThreshold=60 GLUT_Gamma=5 ;VRS Contrast ;VRS Gamma (gray/BW)
[HP ScanJet 6300C-VRSSET] EdgeThreshold=63 GLUT_Gamma=20 ;VRS Contrast ;VRS Gamma (gray/BW)
GLUT_Gamma=5
[HP Scanjet 8290-VRSSET] EdgeThreshold=60 GLUT_Gamma=0 CLUT_Brightness=50 CLUT_Contrast=50 CLUT_Gamma=0 ;VRS Contrast
[HP Scanjet 7800-VRSSET] EdgeThreshold=60 GLUT_Gamma=5 CropEnable=1 BlackBorder=0 CLUT_Brightness=55 CLUT_Contrast=50 CLUT_Gamma=0 ;No Edge Cleanup ;VRS Contrast
[HP Scanjet 8300-VRSSET] EdgeThreshold=60 GLUT_Gamma=0 CropEnable=1 BlackBorder=0 CLUT_Brightness=55 CLUT_Contrast=50 CLUT_Gamma=0 ;No Edge Cleanup ;VRS Contrast
[HP Scanjet N9120-VRSSET] EdgeThreshold=50 GLUT_Gamma=0 CropEnable=1 BlackBorder=1 CLUT_Brightness=50 CLUT_Contrast=53 CLUT_Gamma=0 ;Enable Edge Cleanup ;VRS Contrast
[Panasonic KV-S6050W-VRSSET]
[Panasonic KV-S2025C/KV-S2026C-VRSSET] GLUT_Gamma=0 EdgeThreshold=70 CropEnable=1 BlackBorder=1 ;VRS Gamma (gray/BW) ;VRS Contrast
[Kodak DS 1500-VRSSET]
[Bell & Howell 500FB-VRSSET] EdgeThreshold=55 GLUT_Gamma=5 CropEnable=1 BlackBorder=1 ;VRS Contrast
[Kodak I80-VRSSET] EdgeThreshold=70 GLUT_Gamma=0 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
[Fujitsu fi-4640S-VRSSET] EdgeThreshold=60 GLUT_Gamma=20 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
[Fujitsu fi-4340C-VRSSET] EdgeThreshold=60 GLUT_Gamma=10 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
GLUT_Gamma=30
[Canon DR-3060-VRSSET] EdgeThreshold=40 GLUT_Gamma=40 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
[Visioneer 9650 USB-VRSSET] EdgeThreshold=70 GLUT_Gamma=10 ;VRS Contrast ;VRS Gamma (gray/BW)
[HP ScanJet 7400C-VRSSET] EdgeThreshold=60 GLUT_Gamma=-3 ;VRS Contrast ;VRS Gamma (gray/BW)
[HP ScanJet 7450C-VRSSET] EdgeThreshold=60 GLUT_Gamma=-3 ;VRS Contrast ;VRS Gamma (gray/BW)
[HP ScanJet 7490C-VRSSET] EdgeThreshold=60 GLUT_Gamma=-3 ;VRS Contrast ;VRS Gamma (gray/BW)
[Fujitsu fi-4530C-VRSSET] EdgeThreshold=60 GLUT_Gamma=10 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
[Canon DR-2080C-VRSSET] EdgeThreshold=60 GLUT_Gamma=20 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW)
[Kodak i200 Series-VRSSET] EdgeThreshold=68 GLUT_Gamma=1 ;VRS Contrast ;VRS Gamma (gray/BW)
CropEnable=1 BlackBorder=1
[Kodak i280-VRSSET] EdgeThreshold=68 GLUT_Gamma=-10 CLUT_Gamma=-10 CropEnable=1 BlackBorder=1 ;VRS Contrast ;VRS Gamma (gray/BW) ;VRS Color Gamma
GlobalThreshold=39 AutoBrightnessEnable=0
[Kodak i600 Series-VRSSET] CropEnable=1 BlackBorder=1 EdgeThreshold=65 GLUT_Gamma=0 CLUT_Brightness=52 CLUT_Contrast=50 CLUT_Gamma=-17
[Panasonic KV-S7065C-VRSSET] CropEnable=1 BlackBorder=1 EdgeThreshold=70 GLUT_Gamma=0 CLUT_Brightness=59 CLUT_Gamma=-12 ; Color brightness ; Color Gamma
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ; ; ; Format of section name: ; [<scanner name>-VINSET] ; ; ; ; ; ; ; ; These items are used to override entries in VRSInput.ini. ; These sections are read by the SvScnCfg.exe program launched ; by the installation script SETUP.RUL. ; NOTE: <scanner name> is similar but not the same string as the <scanner id tag> used elsewhere in this file. where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-VINSET] <scanner name>-VINSET sections:
EdgeAggressivity=100
[HP Scanjet 7800-VINSET] BrightnessAggressiveness=0 BrightFloor=45 EdgeAggressivity=128 BlackBackground=1 CSkewDetect.offsets.right=10 CSkewDetect.reconcile_crop=0 CSkewDetect.gray_stats_error_sum_thr_white_bkg=45
[HP Scanjet 8300-VINSET] BrightnessAggressiveness=50 BrightFloor=45 EdgeAggressivity=128 BlackBackground=1 CSkewDetect.offsets.right=10 CSkewDetect.reconcile_crop=0 CSkewDetect.gray_stats_error_sum_thr_white_bkg=45
[Kodak DS 1500-VINSET]
[Kodak I60-VINSET]
[Fujitsu fi-4010CU-VINSET]
BrightnessAggressiveness=0 EdgeAggressivity=128
[Panasonic KV-S7065C-VINSET] BrightnessAggressiveness=0 BrightFloor=50 EdgeAggressivity=160 TopOverScanSize=1800 top edge. ; No way to adjust Margin when enabled. This allows VRS to crop
[INFO-General]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>-INFO] Following are the <scanner name>-INFO sections.
; ; ; ;
where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-INFO]
; The ScannerBackground is read every time the ; scanner is reserved. It is translated into a setting in ; the "defaults bag", and AUTO_CROP_CAPABLE is adjusted accordingly. ; ; ; ; ; CropPageSizeInfo is read at the start of every ; batch. When CropPageSizeInfo=2 in this file, ; SVRS is prevented from using MAX paper size in ; cropping situations. ; ; CropPageSizeInfo=2 ;Always use application's papersize ScannerBackground=1 ;white ScannerBackground=2 ;black
CropPageSizeInfo=2
[Canon DR-9080C-INFO]
[Panasonic KV-S6040W (black background)-INFO] ScannerBackground=2 CropPageSizeInfo=2 ;Always use application's papersize
[Panasonic KV-S6045W (black background)-INFO] ScannerBackground=2 CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 500FB-INFO] ScannerBackground=2 CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 8000 B/C-INFO] ScannerBackground=2 CropPageSizeInfo=2 ;Always use application's papersize
[Bell & Howell 8000 B/C (non-interactive mode)-INFO] ScannerBackground=2 CropPageSizeInfo=2 ;Always use application's papersize
[Canon DR-2080C-INFO]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>-VRSISIS-KPMSPEC] ; ; ; ; ; The appropriate section read every time the ; scanner is reserved. These items are used to set ; the ISIS kpm's private spec variables for proper ; SVRS operation. These sections are intended to ; be used with any ISIS setting (TAG) for which there is a where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-VRSISIS-KPMSPEC] Following are the <scanner name>-VRSISIS-KPMSPEC sections.
; corresponding ISIS kpm setting. ; ; The format of the items in these sections is ; dependent on two things: (1) the definition of the ; KCL table in the ISIS kpm, and (2) the behavior of ; the KCLSETTableIniRead function. ; ; Some useful constants: ; ; ; ; ; ; ; ; ; ; ; wScanContrast=32818 wScanContrast=1 wScanContrast=2 wScanContrast=4 wScanContrast=8 ;50 percent ;SCN_CONTRAST1 ;SCN_CONTRAST2 ;SCN_CONTRAST3 ;SCN_CONTRAST4
wScanContrast=16 ;SCN_CONTRAST5 wScanContrast=32 ;SCN_CONTRAST6 wScanContrast=64 ;SCN_CONTRAST7 wScanContrast=128 wScanPaperSource=1 ;SCN_CONTRAST8 ;SCN_SFLAT
[Fujitsu M3091DC-VRSISIS-KPMSPEC] wScanContrast=32834 ;66% wScanDensity=32818 ;The ISIS driver doesn't use a Brightness value when scanning in Grayscale
[Fujitsu M3092DC-VRSISIS-KPMSPEC] wScanContrast=4 wScanDensity=32818 ;SCN_CONTRAST3 ;The ISIS driver doesn't use a Brightness value when scanning in Grayscale
wScanDensity=8
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
wScanDensity=16
;SCN_DENSITY5
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
; System defaults to ADF. As long as that's ok, no entry is needed here for wScanPaperSource.
wScanDensity=32818
[Canon DR-2080C-VRSISIS-KPMSPEC]
wScanContrast=16 wScanDensity=16
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>-VRSISIS-ISISSET] ; ; where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. Following are the <scanner name>-VRSISIS-ISISSET sections.
; ;
; The appropriate section is read every time the ; scanner is reserved. These items are used to set ; the ISIS driver for proper SVRS operation. These ; sections are intended to be used any ISIS setting (TAG) ; for which there is *NO* corresponding ISIS kpm setting. ; ; The format of the items in these sections is dependent on ; (1) the scanner's ISIS driver, and (2) the PixTagRestoreFile ; function of the ISIS toolkit. ; ; Each section has some useful constants included as comments. ; The items that will work for one scanner may not work for a ; different scanner. ;
[Canon DR-2080C-VRSISIS-ISISSET] Gamma=0 TagAutoSize=1 Deskew=0 CropDetect=0 EdgeEmphasisIntensity=1 DropOut(-1)=0 DropOut(0)=0 DropOut(1)=0 ; Gamma = Standard ; Detect Page Size = Checked ; Deskew = Unchecked ; Border Removal = Unchecked ; Edge Emphasis = Soft (slider at leftmost position) ; Dropout colors all set to None
[Fujitsu fi-5750C-VRSISIS-ISISSET] Backing=3 OverscanEnable=1 DetectPageLength=1 WhiteFollow=2 Cropping=0 BlackBorderRemoval=0 Gamma=0 ; Black background for Both sides ; Enable overscan ; Enable Page Length detection ; Off ; Dont use the scanners cropping ; Dont use the scanners border removal ; Normal
[Fujitsu M3091DC-VRSISIS-ISISSET] DropoutColor=2 Emphasis=1 ;DropoutColor=1 ;DropoutColor=3 ;KeepLampOn=0 ;KeepLampOn=1 ;Low ;Red ;Blue ;Lamp Power Save Mode ON ;Lamp Power Save Mode OFF ;Green (normal)
;Low ;Red ;Blue ;Lamp Power Save Mode ON ;Lamp Power Save Mode OFF
[Kodak DS 1500-VRSISIS-ISISSET] Emphasis(1)=0 Tag 5084(1)=1 ;Tag 1403(1)=1 ;Tag 5084(1)=1 ;Tag 5084(1)=0 ;Tag 5048(1)=0 ;Tag 5048(1)=1 ;Tag 5368(1)=0 ;Tag 5368(1)=1 ;Tag 5368(1)=2 ;Tag 1401(1)=0 ;Tag 1401(1)=1 ;Detect Page Size ON ;Length Control ON (Auto length detection) ;Length Control OFF ;Detect Double Feed OFF ;Detect Double Feed ON ;Detect Double Feed Sensitivity Low ;Detect Double Feed Sensitivity Normal ;Detect Double Feed Sensitivity High ;Mirror Image OFF ;Mirror Image ON
;Couldn't get Reverse Image to work for some reason ;so it is not included.
[Canon DR-3080C-VRSISIS-ISISSET]
[Canon DR-5080C-VRSISIS-ISISSET] ;DetectPageSize=1 DetectPageSize=0 ColorDropout=None ;ColorDropout=Red ;ColorDropout=Green ;ColorDropout=Blue ;Margin=1 Margin=0 ;MarginMM=10 MarginMM=0 BackgroundEraseIntensity(1)=7 ;AE ;EdgeEmphasisIntensity(1)=1 EdgeEmphasisIntensity(1)=3 ScanningSpeed(0)=0 ;ScanningSpeed(0)=1 ;EE ;EE ;High Speed Scanning OFF ;High Speed Scanning ON
DropOut(2)=0 Deskew=0 CropDetect=0 CropMethod=0 Margin=1 Marginmm=6 AutoDeskew=0 BrightnessBackEnabled=1 BrightnessManualBack=110 BrightnessAutoBack=0 EdgeEmphasis=0 EdgeEmphasisIntensity=3 Gamma=0 GammaModeGrayFront=1 GammaModeGrayBack=1 GammaModeRedFront=1 GammaModeGreenFront=1 GammaModeBlueFront=1 GammaModeRedBack=1 GammaModeGreenBack=1 GammaModeBlueBack=1 GammaFactorGrayFront=1 GammaFactorGrayBack=1 GammaFactorRedFront=1 GammaFactorGreenFront=1 GammaFactorBlueFront=1 GammaFactorRedBack=1 ; 1 = Soft, 2 = Soft+, 3 = Midpoint, 4 = Midpoint+, 5 = Sharp ; 0 = Disabled, 1 = Enabled ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Enabled Backside Brightness adjustment ; Set backside brightness to this value (1 to 255)
GammaFactorGreenBack=1 GammaFactorBlueBack=1
[Canon DR-9080C-VRSISIS-ISISSET] PageSize= DropOut(-2)=0 DropOut(-1)=0 DropOut(0)=0 DropOut(1)=0 DropOut(2)=0 Deskew=0 CropDetect=0 CropMethod=0 Margin=1 Marginmm=6 AutoDeskew=0 BrightnessBackEnabled=0 BrightnessManualBack=128 BrightnessAutoBack=0 EdgeEmphasis=0 EdgeEmphasisIntensity=3 Gamma=0 GammaModeGrayFront=1 GammaModeGrayBack=1 GammaModeRedFront=1 GammaModeGreenFront=1 GammaModeBlueFront=1 ; 1 = Soft, 2 = Soft+, 3 = Midpoint, 4 = Midpoint+, 5 = Sharp ; 0 = Disabled, 1 = Enabled ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1
GammaModeRedBack=1 GammaModeGreenBack=1 GammaModeBlueBack=1 GammaFactorGrayFront=1 GammaFactorGrayBack=1 GammaFactorRedFront=1 GammaFactorGreenFront=1 GammaFactorBlueFront=1 GammaFactorRedBack=1 GammaFactorGreenBack=1 GammaFactorBlueBack=1
; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1 ; Only valid if Gamma=1
[Canon DR-4080U-VRSISIS-ISISSET] Emphasis(1)=0 Tag 5084(1)=1 ;Image Emphasis = None ;Length Control ON
[Panasonic KV-S6040W (white background)-VRSISIS-ISISSET] Emphasis(1)=0 Tag 5084(1)=1 ;Image Emphasis = None ;Length Control ON
[Panasonic KV-S6045W (white background)-VRSISIS-ISISSET] Emphasis(1)=0 Tag 5084(1)=1 ;Image Emphasis = None ;Length Control ON
[Panasonic KV-S2025C/KV-S2026C-VRSISIS-ISISSET] LengthControl=1 ImgEmphasis=0 Gamma=7 WhiteLevel=0 ; Length Control ON ; Image Emphasis = None ; Gamma = Gamma for CRT (default value) ; White Level = Off
Gamma=7 WhiteLevel=0
[Fujitsu fi-4640S-VRSISIS-ISISSET]
[Fujitsu M3093DG-VRSISIS-ISISSET] Tag 5084(1)=1 Tag 1440(1)=0 Tag 1440(-1)=0 Tag 1301(1)=0 Tag 1445(1)=2 Tag 1301(1)=0 ; White Level Follow = Off ; Gamma = Default
[Fujitsu fi-4530C-VRSISIS-ISISSET] DetectPageLength=1 Gamma=3 CustomGamma=12 Shadow=10 Highlight=230 OverscanEnable=1 Emphasis(-1)=0 Emphasis(0)=0 Emphasis(1)=0 Cropping=0 ; Disable Automatic Crop and Deskew ; Enable Page Length Dectection ; Custom Gamma settings ; Gamma = 1.2 ; Part of Custom Gamma ; Part of Custom Gamma ; Black background on front and back ; Edge Processing = None
Gamma=0
[HP Scanjet 7800-VRSISIS-ISISSET] Gamma=0 Dither=None LampTimer=0 ; Instant Lamp Warmup ; None, 1 = Use Download
[HP Scanjet 8300-VRSISIS-ISISSET] Gamma=0 Dither=None LampTimer=0 ; Instant Lamp Warmup ; None, 1 = Use Download
[HP Scanjet N9120-VRSISIS-ISISSET] BackgroundColor=2 ;Set background to black. 1 = White Gamma=0 Dither=None LampTimer=0 ; Instant Lamp Warmup ; None, 1 = Use Download
[Kodak i200 Series-VRSISIS-ISISSET] JpegQuantization(-2)=1 JpegQuantization(-1)=1 JpegQuantization(0)=1 JpegQuantization(1)=1 JpegQuantization(2)=1 ColorToGray(-2)=1 ColorToGray(-1)=1 ColorToGray(0)=1
ColorToGray(1)=1 ColorToGray(2)=1 TransportTimeout=3 EnergySaverEnable=1 EnergySaver=60 CameraEnableFC=1 CameraEnableBC=1 OverScanPixel(-1)=1200 ; Overscan backside 0.375 inches OverScanPixel(1)=1200 ; Overscan frontside 0.375 inches OverScanInch(-1)=1 OverScanInch(1)=1 ColorTable(0)=Mixed ; Overscan backside measured in inches ; Overscan frontside measure in inches
[Kodak i280-VRSISIS-ISISSET] JpegQuantization(-2)=1 JpegQuantization(-1)=1 JpegQuantization(0)=1 JpegQuantization(1)=1 JpegQuantization(2)=1 ColorToGray(-2)=1 ColorToGray(-1)=1 ColorToGray(0)=1 ColorToGray(1)=1 ColorToGray(2)=1 TransportTimeout=3 EnergySaverEnable=1 EnergySaver=60
CameraEnableFC=1 CameraEnableBC=1 OVSEnableXY(0)=1 OVSEnableXY(1)=1 OVSEnableY(0)=1 OVSEnableY(1)=1 OVSEnableX(0)=1 OVSEnableX(1)=1 YOverScanPixel(0)=450 YOverScanPixel(1)=450 YOverscanInch(0)=450 YOverscanInch(1)=450 XOverScanPixel(0)=450 XOverScanPixel(1)=450 XOverscanInch(0)=450 XOverscanInch(1)=450 ColorTable(0)=Mixed 2
[Panasonic KV-S7065C-VRSISIS-ISISSET] Margin=1 Crop2=0 BorderRemoval=0 Deskew2=0 DeskewOption=0 LengthControl=0 WhiteLevel=0 FitToPage=0 ; Enable Margin option ; No cropping ;
; Medium
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>--VRSTWAIN-KPMSPEC] ; ; ; ; ; The appropriate section read every time the ; scanner is reserved. These items are used to set ; the TWAIN kpm's private spec variables for proper ; SVRS operation. These sections are intended to ; be used with any TWAIN setting (CAP) for which there is a ; corresponding TWAIN kpm setting. ; ; The format of the items in these sections is ; dependent on two things: (1) the definition of the where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-VRSISIS-ISISSET] Following are the <scanner id tag>-VRSTWAIN-KPMSPEC sections.
; KCL table in the TWAIN kpm, and (2) the behavior of ; the KCLSETTableIniRead function. ; ; Some useful constants: ; ; ; ; ; ; ; ; ; ; ; wScanContrast=32818 wScanContrast=1 wScanContrast=2 wScanContrast=4 wScanContrast=8 wScanContrast=16 wScanContrast=32 wScanContrast=64 wScanContrast=128 wScanPaperSource=1 ;50 percent ;SCN_CONTRAST1 ;SCN_CONTRAST2 ;SCN_CONTRAST3 ;SCN_CONTRAST4 ;SCN_CONTRAST5 ;SCN_CONTRAST6 ;SCN_CONTRAST7 ;SCN_CONTRAST8 ;SCN_SFLAT
[Fujitsu fi-4010CU-VRSTWAIN-KPMSPEC] wScanContrast=32818 ;SCN_AUTO_CONTRAST wScanDensity=32818 ;SCN_AUTO_DENSITY ; Valid values are 32811 through 32825. ; These equate to the values 1, 9, 29, 49, 69, 89, 109, 128, 148, 168, 188, 208, 228, 248, 255
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [<scanner name>--VRSTWAIN-KPMSPEC] ; ; ; ; ; The appropriate section is read every time the ; scanner is reserved. These items are used to set ; the ISIS driver for proper SVRS operation. These ; sections are intended to be used any TWAIN setting (CAP) ; for which there is *NO* corresponding TWAIN kpm setting. ; where <scanner name> is the name of the scanner as appearing in the [ScannerNames] section in this file. e.g.: [Fujitsu M3091DC-VRSISIS-ISISSET] Following are the <scanner id tag>-VRSTWAIN-TWAINSET sections.
; The format of the items in these sections is dependent on ; the scanner's TWAIN driver. ; ; Each section has some useful constants included as comments. ; The items that will work for one scanner may not work for a ; different scanner. ;
[EPSON TWAIN 5-VRSTWAIN-TWAINSET] ICAP_GAMMA=2.2 ;Gamma Correction (for Sample purposes only)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [Scanner Component Installs] ; Every new scanner added after 3.05 will have a Wise component install ; and will add an entry in this section to indicate the Wise install. ; Following are added for the VRS 3.1 Wise Component Install
[Scanner Component Installs] Panasonic KV-S2025C/KV-S2026C=CI-KV-S2025C2026C.EXE Panasonic KV-S2045C/KV-S2046C=CI-KV-S2045C2046C.EXE Fujitsu fi-4530C=CI-fi-4530C.EXE Fujitsu M4097D (Hardware)=CI-Fujitsu-M4097D.exe
Fujitsu M4099D (Hardware)=CI-Fujitsu-M4099D.exe Fujitsu fi-4750C (Hardware)=CI-fi-4750C.exe Fujitsu fi-4750L (Hardware)=CI-fi-4750L.exe Kodak I80=CI-Kodak-I80.exe Canon DR-6080=CI-DR-6080.exe Canon DR-9080C=CI-DR-9080C.exe Fujitsu fi-5750C=CI-fi-5750C.exe Panasonic KV-S7065C=CI-KV-7065C.exe Kodak i280=CI-Kodak-i280.exe HP Scanjet 7500=CI-HP-7500.exe
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; ; Format of section name: ; [Non-SCSI Scanners] ; Every VRS scanner that doesn not require SCSI connection will have a key here and ; a value of 1 here. ; Following are added for the VRS 3.1 Wise Component Install
[Non-SCSI Scanners] Canon CanoScan N1220U=1 Canon CanoScan N650U/N656U=1 Fujitsu fi-4110CU=1 Visioneer 9650 USB=1 HP ScanJet 7400C=1
HP ScanJet 7450C=1 HP ScanJet 7490C=1 Kodak i200 Series=1 Kodak i600 Series=1 Kodak i280=1 HP Scanjet 7000=1 HP Scanjet 7500=1 HP Scanjet 7800=1 HP Scanjet 8290=1 HP Scanjet 8300=1 HP Scanjet N9120=1 Seguimiento del informe anterior
5 sistemas. 3 complejidades. Lectura de la normatividad, Identificar particularidades del proceso; roles y funciones, etc. Y 3 la carencia de la documentacin (mapeo del proceso respecto a lo que el sistema hace) Revisar la normatividad80 hrs. Mapear el proceso 40 hrs. Mapear la funcionalidad vs. El proceso que ya tienes mapeado. 80 hrs. 1200 hrs. Brechas entre funcionalidad del sistema vs proceso. Para documentar 80 hrs mas 10