Adjustable Heavy-Duty Solid Forged Brass Shower Door
Hinges with Square Corners and Edges
Product Code Product Code Product Code
H-MGTWA H-MGTWA-OP H-MGTWA-FP Wall Mount Wall Mount Wall Mount with with Short with Offset Full Back Plate Back Plate Back Plate
• Adjustable Feature Allows for Adjustment of Door
Closing Position After Installation • Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips Screws Available Upon Request) • Self-Centering 0° Return with Adjustment Up to 30° In or Out Product Code Product Code • Solid Forged Brass Construction H-M135GTGA H-M180GTGA • Precision Machined 300 Series Stainless Steel Components 135 ° Glass-to-Glass 180 ° Glass-to-Glass • Dual Precision Wound Stainless Steel Return Springs • Self-Closing from 25 Degrees Adjustable Angle Instructions Steps: • Non-Mouse Ear Design for Added Adjustment 1. Use 3 mm Hex Wrench (A) to loosen two screws (B) by turning • Designed for 3/8" and 1/2" (10 and 12 mm) Glass one circle counter-clockwise. Then proceed with the adjustment. 2. Once you have aligned the door, re-tighten two screws (B). • Wall Mount Hinges Include Matching Finish Stainless Steel Mounting Screws Adjustment Angle • Allen Wrench Included B • Rated at 50 lbs (22.5 kg) per Hinge Outside 30˚ (Max.)
AVAILABLE IN ALL FINISHES, See Page 3
Glass Door 30˚ (Max.) A 3/8" Glass = RATED MAXIMUM MAXIMUM 5.05 lbs/sf (2.29 kg) CAPACITY DOOR WEIGHT DOOR WIDTH Inside (3 mm Hex Wrench) 1/2" Glass = 2 Hinges 100 lbs (45 kg) 30" (762 mm) 6.40 lbs/sf (2.90 kg) 3 Hinges 150 lbs (68 kg) 36" (914 mm)
Note: Complete the above product codes by adding the desired finish code to the end.