Академический Документы
Профессиональный Документы
Культура Документы
ROBERT SIQECA, PE
PROJECT: ITEM: 920 Westchester Ave, BX, NY Pile design PAGE JOB # DATE: 1 OF6 1531
8/2/2010
BY: CHK'K:
RS RS
Foundation Wall Data: f 'c, grout strength f'c_f, footing concrete strength f 'y c steel strength casing f 'y b steel strength bar
, strength reduction factor for shear Area grout= Area bar= Area casing= Plunge length= Dia casing= Dia bond=
= = = = = = = = = =
Pile Design
424.5 kips
=
(Note: 0.40 is per AASHTO 8.15.2.1.1; 0.47 is per AASHTO, i.e. 1/2.12 = 0.47)
503.03 kips
257,717 lbs
Pile Design
Tension - Allowable load P t-allowable = 0.55 Fy bar x Area bar + P transfer allowable= (Note: 0.55 is per AASHTO Table 10.32.1A)
350.5 kips
Compression - Allowable load P c-allowable = 0.4fc-grout x Area grout + 0.47 Fy bar x Area bar + P transfer allowable=
=
(Note: 0.40 is per AASHTO 8.15.2.1.1; 0.47 per AASHTO, i.e 1 /2.12 = 0.47)
441.0295 kips
Pile Design
P casing bond= (bond btwn casing & footing/FS)x3.14xD casing x Casing embedment = 20,617 lbs
Pile Design
b. Check if compression load can be transferred through bearing on pile top(figure 5-8) without optional bearing plate:
Pn, max Pn, max + Pcasing bond Detail in Figure 5-8 cannot work.
= =
c.Design for bearing plate without stiffeners Pu=300kips- P casing bond= 279.38 kips 920 Westchester Ave
Pile Design
109.56 in2
2.05 in
fp=Pu/ 3.14*Dia casing
10.316 ksi
0.803 in