Академический Документы
Профессиональный Документы
Культура Документы
Flow type:
1 Single phase
Input Values for Single Phase Flow: Relative Rougness of the pipe Pipe inside diameter Density of the fluid Viscosity of the fluid Mass flow rate of the fluid 0.00E+00 0 mm 0.00E+00 mm 0.00E+00 kg/m3 0 cP 0 kg/hr 0
TI-PHASE FLOWS Single phase Single phase Multi-phase Relative Rougness of the pipe Pipe inside diameter Density of the fluid 0.00E+00 0 0.00E+00 0.00E+00 0 0 0 0 0 0 0 Viscosity of the fluid Mass flow rate of the fluid
Pipe inside diameter Viscosity of the liquid Mass flow rate of the vapour Mass flow rate of the liquid Density of the liquid Density of the vapour Surface tension of liquid Viscosity of the vapour
ft/sec N/A
E= (pro V)^.5 = Bx = (pro V*pro L)^.5 = By = Avg. fluid density, D = Total flow rate, Q = Flow regime is Velocity, U = Prssure Drop = Phi SQ =
Dispersed Z=<.1 M = #DIV/0! Since Z = #DIV/0! C = #DIV/0! Z=<.5 M = #DIV/0! Thus, M = #DIV/0! Else M=
Selection of regime Cond 1 Cond 2 Cond 3 Cond 4 #DIV/0! 0 0 0 #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! Delta P =
PHASE FLOWS
I-PHASE FLOWS