Академический Документы
Профессиональный Документы
Культура Документы
Various Power station Parameters and provides a serial interface to the PC.
The SCADA (Supervisory Control And Data Acquisition System) is achieved by transferring the parameters to a remote terminal and getting the feed back from the remote computer and abide by the same. This Project also supports Automatic Prediction and Self Protection. For eg if a Transformer gets Over Heated, then automatically the Loads will get Tripped Off. The transfer rate of this microcontroller is 9600 Baud rate. This enables us to view and track the online changes encountered in the Particular parameter or of all the parameters. One of the main advantage of this project is it allows us to view all the parameter readings simultaneously on the screen. The Graph drawn on the screen keeps on tracking the
changes on the parameter. It also supports Background Processing of the Parameters. Parameters The parameters are classified into Analog and Logic
4. Max Bus Current 5. Incoming Current 6. Power 7. Active Power 8. Power Factor 9. Frequency Logic Parameter: 1. Over Heat Protection 2. Flame Identification 3. Trespassing Identification
BLOCK DIAGRAM
SCADA
RS232 Interface
Remote Computer
Power Supply
Analog Inputs
Relay Drivers