Академический Документы
Профессиональный Документы
Культура Документы
9.
(a)
An element in a two-dimensional stress system is subjected to normal stress intensity of x = 150 MPa tensile along
X-direction and y = 100 MPa compressive along Y-axis and shear intensity xy = yx = 50 MPa. Determine the planes
of zero shear and maximum shear. Also find the normal and shear stress intensity on these planes. (b) [8]
A solid circular shaft is required to transmit 120 kW at 400 rpm. It is also subjected to a bending moment of 4 10 6 Nmm. Find the suitable minimum diameter of the shaft if the maximum principal stress is limited to 100 N/mm2. What will be the maximum shear stress produced in the shaft ? Or [8]
10.
(a)
The intensity of the resultant stress, on a plane AB at a point in a material under stress is 80 N/mm2 and is inclined at 30 to the normal to that plane. The normal components of stress on another plane BC, at right angles to the plane
[4262]-103
10