Академический Документы
Профессиональный Документы
Культура Документы
Sana Zahid
Interactive Learning
Aspen HYSYS
Simulation Environments
Fluid Package
Component Property Package
Hypo Groups
Hypo Components
Oil Environment
Assay & Blend
Basis Environment
Simulation Environment
Specifying Components
Adding Streams
Flash Calculations
Workshop
1. Import and Export a component list with following components. 2. Create a hypo component C7+ having boiling pint =110 oC 3. Import and export a fluid package peng robinson with the name gas plant 4. Select the unit set to field units 5. Add streams with the composition below using three methods a) From menu b) Using object pallet c) Using workbook Gas Well1
Workshop
Gas Well 2
Gas Well 3
Workshop
Workshop
Use property table to add the properties; mass density and
thermal conductivity as dependent properties and pressure as 1st independent variable with the increments of 2500, 5000, 7500 and 9000 Kpa and temperature with 10 equal intervals from 0 to 100 oC. Steam property view:
Workshop
Customizing your workbook: add a tab with the name
other props and add properties in the stream Cp/Cv, mass heat of vaporization, molar enthalpy. And print your workbook