Академический Документы
Профессиональный Документы
Культура Документы
AB OY
ACTIVE SPARE-TIME
Steel analysis Carbon steel: Hardened HRC 63-65 Tempered HRC 59 C0,81 Mn-0,56 S-0,004 P-0,01 Si 0,35 V-0,161 Cr-0,54 Stainless: Hardened HRC 57-59 Tempered HRC 57 C-0,479 Si-0,37 Mn-0,38 Ni-0,09 Cr-14,53 Mo-0,51 P-0,019
Www.brisa.fi
Www.brisa.fi
Polar Line
206 Fisher stainless 120x20 mm 18 eur 118P Lauri PT 63x16 mm 11,00 eur
Www.brisa.fi
411 Scout Bowie, stainless 130x22 mm 22 eur 221 Turman stainless laminated 80x25mm 16,60 eur
222 Veideman stainless laminated 90x22mm 22,70 eur 415 Dagger, stainless 150x23 mm 26 eur
300 Mora Laminated 60x10 mm 6,20 eur 304 Mora Skinner 92x26 mm Stainless 16,40 eur
Www.brisa.fi
Vikstrm
Handforged utility blades.
161
Puronvarsi
handforged from old Krupp carbonsteel
150 Lammi 95x19 mm 19 eur
Www.brisa.fi
Styrefors
Mattias Styrefors High contrast damascus. Steel composition: Uddeholm 20C (1870)Uddeholm 15N20 Pure Nickel
Poul Strande
332 Double Stripe 23x85 mm 108 eur 333 Double Stripe 23x95 mm 118 eur
For updates, news, tutorial, information on the products visit our online shop WWW.BRISA.FI. Take advantage of our monthly special offers.
Jukka Hankala
- knifeblades forged out from round bar Silversteel: C 1.18%, Cr 0.7% and V 0,1%. Bhler K510 (DIN 115 CrV 3).
Andr Andersson
laminated damascus knifeblades with uddeholm 15n20 steel in core between iron and nickel.
342 Mosaic Damascus 25x110 mm 115 eur 177 Tuhkuri 110x30 mm 48 eur
Www.brisa.fi
Roselli
Forged carbon steel blades. Taottuja hiiliters teri. Smidda kolstlsblad.
Eklund
Stainless blades in highest precision. Tarkoin tehtyj ruostumattomia teri . Rostfria blad med noggrann precision.
191 Roselli Uncle 30x73 mm 42 eur 361 Eklund Scandi80 23x80 mm 30 eur
362 Eklund Hunter 25x75 mm 42 eur 193 Roselli Whittler 19x85 mm 40 eur
Mattsson
The Mattsson blades are hand forged, three layer laminated, ground and finished on the highest level. Steel in core is UHB26C (high carbon 1.25%)
Carlsson
Handforged utility blades. Ksintaottuja kyttteri. Handsmidda bruksblad.
Www.brisa.fi
THUNDER line
- blades are made from 01 and 1095 carbonsteel. High contrast damascus with a welded tang, long enough for riveting.
Fulltang blades
140 THUNDER 100x25 mm 89 eur 441 Elk Skinner 26x100 mm 22 eur Tapered blade, holes 4 mm and 6 mm
445 Eklund 25x95 mm 38 eur holes 2.3 mm and 6.3 mm 450 Bolster, aluminium 5,50 eur fits #441 451 Rivets 3x male-female 1,50 eur - fits #441, 442 Blades 440-442 are stainless steel 440, made in Germany. Blade 445 stainless Aebl Blade dimension above.
The traditional Japanese Chefs knives are sharpened in one side single bevel edge with a slightly concaved flat side for sharper and straight penetrating cutting task. The unique blade is made of hard Shirogami Hagane carbon steel laminated and hand forged with soft iron. This hard tempered (Rockwell 62) single edge carbon steel blade can be easily honed to a razor sharp.
430 Yanagiba 431 Deba Damascus 432 Usuba Damascus Damascus 210x25 mm 165x52 mm 64 eur 165x42 mm 62 eur 57 eur
1636 FrameLock-1 22 eur 1651 Torx key 5, 6 eur 1652 Torx key 6, 6 eur
1637 FrameLock-2 24 eur 1655 Tap 1-72 10,80 eur 1656 Tap 2-56 10,80 eur
1638 TB-80 39 eur 1660 Drill bit for 1-72 tap 2 eur 1661 Drill bit for 2-56 tap 2 eur
1667 Pivot pin 1/8 (3.2 mm) 3 eur torx 6 1639 TB-75 38 eur 1668 Pivot pin 3/16 (4.8 mm) 3 eur torx 9
1675 Button head screws 2-56 x 1/4 stainless 2,00 eur/5 torx 6 1640 TB-60 32 eur
1676 Flat head screws 1-72 x 1/4 2,00 eur/5 torx 5 1677 Flat head screws 2-56 x 1/4 2,00 eur/5 torx 6
1630 DDR-1 49 eur scales not included 1674 Thumb stud 1,80 eur 1673 Detend ball 1/16 1 eur/5
1680 Bronze washers 0.010 ( 0,255 mm) for 1/8 pivot 6 eur/10 pc 1681 Bronze washers 0.010 ( 0,255 mm) for 3/16 pivot 6 eur/10 pc
1682 Nylatronic washers 0.010 ( 0,255 mm) for 1/8 pivot 6 eur/10 pc 1683 Nylatronic washers 0.010 ( 0,255 mm) for 3/16 pivot 6 eur/10 pc
Www.brisa.fi