Академический Документы
Профессиональный Документы
Культура Документы
Connection
1. Put the welding cable through the opening of
the process sensor
3. Option: Attach wire and gas sensor, notice the direction of the gas flow. 3. Attach the process sensor and the WeldScanner with the interface cable. 4. Attach the WeldScanner to the power source and switch the device on. The data recording can start in a minute. The start of the welding process is recognized automatically.
5.
Operation
turning the wheel for the choice of a function, pressing for activating a function
Change of charge number Table of all welding seams Save welding data via memory stick Delete all welding data from ring memory
Scope mode Calibration mode (option with costs) Change of the basis settings
More applications
Scope mode
Recording data with a detailed, high sampling rate analysing curves zoom in and measure possibly
________________________________________________________________________________
Calibrating mode
Calibration of welding welding equipments managing of the calibration certificates p r i n t o u t
HKS-Prozesstechnik GmbH Heinrich-Damerow-Str. 2 D-06120 Halle Tel.: ++ 49 345 68309 -0 Fax.: ++49 345 69309 49 e-mail: info@hks-prozesstechnik.de http://www.hks-prozesstechnik.de