Академический Документы
Профессиональный Документы
Культура Документы
ION-M Series
Optimized Multi-Band Multi-Operator Cost-Effective Solutions
Ensuring high-quality indoor and outdoor coverage is an important consideration when planning network upgrades that offer new services and higher data rates to customers and increased revenue to operators. CommScopes ION-M (intelligent optical network) series radio-over-ber system is a wide-band, technology-agnostic distribution platform that offers operators a robust yet cost-effective solution for any of their coverage needs.
adapts easily to whatever system architecture and power level are required in the frequency range from 70 MHz to 2700
BTS
MHz. The system is future-proof, ready for evolution to advanced modulation schemes
WLAN
lowest interference. Cutting-edge technology fuels the ION-Ms highpower, robust design making it suitable for both indoor and outdoor applications. As a multiband, multi-operator system, the ION-M
BTS BTS MU
BTS
WLAN
BTS BTS MU BTS
WLAN
BTS BTS MU
BTS
like HSPA+ (high speed packet access), EV-DO (evolution-data optimized) and LTE (long term evolution).
WLAN
Basic Functions
ION-M has two basic components: a centralized master unit and multiple remote units. The master unit transmits and receives RF (radio frequency) signals via coaxial cable to/ from the collocated operator base stations while controlling the entire ION -M system, including the provisioning of the backhaul connectivity to the OMC (operation and maintenance center). The remote units are connected via optical fiber to the master unit, which can support up to 124 remote units. The remote units are available in single- or multi-band configuration for a variety of frequency combinations (6 frequency bands simultaneously over one fiber), power classes, and system designs. Up to four remote units can be connected to a single optical transceiver at the master using a single fiber. Multi sector sites can be supported by multiple RUs fed from a single fiber using WDMtechnology. In single band scenarios a unique multi2
sector RU provides coverage for up to three sectors. RF signals are transported fully transparent on a single fiber at 1310 nm and 1550 nm over up to 20 km. In the event of fiber shortage, both CWDM (coarse wavelength division multiplexing) or DWDM (dense wavelength division multiplexing) are supported to exploit existing fiber plants at its most capability. Multiple operators using multiple technologies can transmit their services simultaneously from a cluster of base stations to a number of remote locations over the same fiber. Depending on the master units configuration and RF planning, the number of remote units assigned to a single sector can be adjusted to accommodate for changing traffic demand. In ION-M re-sectorizing requires only marginal changes at the master unit. The built-in AGC (automatic gain control) feature compensates for optical link loss, guaranteeing constant gain over a changing link budget, making installation and maintenance quick and easy. Setting up the ION-M system is easy, thanks to a web-based GUI (graphical user interface). All remote units can be commissioned remotely through a built-in test head, and the entire system can be monitored and configured remotely via A.I.M.O.S. (Andrew integrated management and operation system).
highly sophisticated control, alarming, and supervision system that also simplifies installation and commissioning. Optional plug-in boards provide relay alarm inputs/ outputs that can communicate with external equipment or act as a simple alarming interface to a base station.
CDMA
VHF
LTE
LTE
--------------------------------------42 42 42
Q 19 Q 19 L Q Q L ML Q M M ML R3 M ML M
ION-M2 ION-M2 19 ION-M4 ION-M4 19 ION-M9 ION-M9R ION-M18 ION-M21 ION-M4/8/9 EP ION-M4/9 (RP11) ION-M85/18/21 ION-M9/18/21 ION-M9/18/21 EP ION-M85/18/21 Lt ION-M9/18/21 Lt
ION-M85P/18P/21P ION-M85P/9/18P/21P
--ION-M8/26 EU / M ION-M9/18P/21P EP ION-M26/26 EU ION-M18P EU ML ION-M9/18P/21P/26 EP / ION-M8 EU / ION-M26 EU M ION-M8/26 --M ION-M26/26 ---
ION-M9/18P/21P
VHF
LTE
-----------
-------------
-------------
-------------
-------------
-------------
36 -----------
36 -----------
36 -----------
35 -----------
------40 -----
------39 -----
----------42
L Q M L M M
Medium Power
Low Power
---
---
---
---
---
---
42
---
---
---
---
---
---
---
---
42
ION-M8/26 EU
All values are composite output power. * ** *** **** ***** 6 HSPA+ measurements (including 64QAM) have been conducted. For further information contact PLM. Please note: Additional Combining Unit (CU) required. Indicated output power on Remote Units without CU, losses must be considered. Assuming 5 MHz carrier bandwidth. Subpopoulations only with ION-M26 EU possible Subpopoulations only with ION-M8 EU possible
TETRA
CDMA
iDEN
P25
LTE
-----------------------------------------------------
------40 ---------------------------------------------
L L 19 M M Q M M M M M M M M
ION-M80 ION-M85 ION-M4/8 19 ION-M80/90/19P ION-M7P ION-M80P ION-M17P ION-M19P ION-M7P/7P ION-M7P/17P ION-M85P/19P ION-M17P/19P ION-M17P/17P/17P ION-M17P/17P/17P Pseudo Omni ION-M19P/19P/19P Pseudo Omni ION-M7P/7P/85P ION-M7P/7P/85P/19P ION-M7P/85P/17P/19P ION-M17HP ION-M19HP ION-M85P/19HP ION-M17P/19HP
Medium Power
Low Power
High Power
---
TETRA
CDMA
iDEN
P25
LTE
Medium Power
-------
43 --43
-------
-------
-------
-------
-------
-------
-------
-------
-------
-------
--43 ---
-------
LTE -------
-------
-------
-------
-------
M M M
WARNING: These remote units are NOT CONSUMER devices. They are designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC LICENSE to operate these devices. Unauthorized use may result in signicant forfeiture penalties, including penalties in excess of $ 100,000 for each continuing violation.
All values are composite output power. * ** *** HSPA+ measurements (including 64QAM) have been conducted. For further information contact PLM. Please note: Additional Combining Unit (CU) required. Indicated output power on Remote Units without CU, losses must be considered. Assuming 5 MHz carrier bandwidth. 7
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
2013 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.
Bulletin BR-101136.9-EN (09/13)