Академический Документы
Профессиональный Документы
Культура Документы
l output (1) if in the input: o The number of 1s are greater than the 0s. o All are 0. The input shall have a TRAFFIC LIGHT indicator. BE CREATIVE to make a miniature of the traffic light so that it will become more realistic. The output will be a Blinking LED with a buzzer.
C 0 1 0 1 0 1 0 1
X 1 0 0 1 0 1 1 1
K-Map 1 0
0 1
1 1
0 1
Materials: 6 pin DIP switch: for INPUT Three LEDs (Red, Yellow, Green): serving as INDICATORS for the INPUT. This is the TRAFFIC LIGHT of your circuit. 1 Blinking LED: for the output 4 500 Ohm Resistor: for the LEDs 1 Buzzer: this is for the output as well. Make sure it can be powered by a 9V battery. Logic Gates: o 74LS08 - AND o 74LS32 OR o 74LS04 NOT 1 2pin Male Header: for the battery source.
Materials for PCB Development: PCB Board (Single-Sided Photoresist) Printed PCB Design 10W (or more) lamp Developer Powder Ferric Chloride Plastic Containers Plastic Bottle Covers Reminders: PLEASE PUT YOUR NAME ON YOUR PCB DESIGN. It must be etched with the PCB design, not simply written with a marker. NO NAME, NO PROJECT SUBMISSION DATE: JAN 13 (MON CLASSES) | JAN 15 (WED CLASSES) A REPORT is required upon submission: o Problem Statement o Solution o PCB Layout o Cost of Materials