Академический Документы
Профессиональный Документы
Культура Документы
Notice
HHP SM-N900W8, SM-N9009, SM-N9006, SM-N900, SM-N9008 SM-N9002 SM-N9005 ASC ( Yes ) Customer ( No ) Notice No. Notice Date 13-74 13th Nov 13
Product Model
* Before unlocking the device for the customer, you MUST ensure that the device genuinely belongs to the customer. Proof of Purchase must be checked for this reason * 2. Instruction [Preparation] 1. External SD Card (2GB Samsung Card as per the Boot loader recovery instructions) 2. PC 3. FMM Unlock kernel binary (FMM Unlock Kernel binary will be released on HHP Svc.) 4. Samsung official binary (FMM Unlock Kernel Binary must be the same as Rollback Prevention file version see next page) What is Rollback Prevention: RP is the new feature introduced for preventing the downgrade to old software.
- This Document cannot be used without Samsungs Authorization Confidential [ FMM Unlock kernel binary ] 1. SM-N900W8 Level 1
st
2nd
2. SM-N9002/N9006/N9008/N9009 Level 1
st
nd
3. SM-N900/N9000Q Level 1
st
2nd
4. SM-N9005 Level 1 3
st
2nd
rd
[Unlock Process] Part 1: Making the device information file 1-1. Insert external SD Card into the device. 1-2. Enter the device into Download mode (Volume Down + Home + Power) & check Published By [Global CS Team in HQ]
1-3. Download the FMM Unlock Binary into the phone. Please note the version of FMM binary MUST be the SAME as RP SWREV. Below two cases are explained in detail Case 1: RP SWREV is S2, T2, R2, A2, P2 Must use FMM Unlock Kernel binary ending with S2, T2, R2, A2, P2. e.g: Reactivation_unlock_HLTE_EUR_S2_T2_R2_A2_P2.tar Case 2: RP SWREV is S1_T1_R1_A2_P1 Must use FMM Unlock Kernel binary ending with S1_T1_R1_A2_P1. e.g: FMM_Unlock_kernel_SM-N900W8_NA_BMC.tar.md5 Case 3: RP SWREV is less than BL3 or S2_T2_R2_A2_P2 You must use FMM Unlock Kernel binary 1st version in the table. e.g: FMM_Unlock_kernel_SM-N900W8_NA_BMC.tar.md5 In Case of SM-N900/N9000Q, there is no RP SWREV displayed in download mode. (RP SWREV is expected to be applied from Kit Kat OS upgrade.) Follow below instruction for SM-N900/N9000Q unlock binary download. 1) FMM_Unlock_Kernel_binary_H3G_1533689_REV00_user_mid_noship.tar.md5 to the phone first. 2) If it fails, download Reactivation_unlock_HA3G_EUR_BL3.tar.md5 Published By [Global CS Team in HQ]
1-3. After rebooting the device, wait for 20 seconds and check the Setup Wizard (it will still be locked by the Reactivation Lock.)
<Step for asking Samsung account and password> 1-4. Turn off the device and remove external SD Card from the device. 1-5. Insert the micro SD card into the PC & move the Device information file (ft.req) in root directory of SD card to PC. Part 2 : Getting the License file. 1-5. Send Device information file (ft.req) to Samsung Tech Supporter to obtain the License file (ks.license) To ensure you can keep a track of all devices, please send the IMEI of the device to Samsung Tech Support member so you can review when you get the information back Part 3 : Unlocking the Reactivation Lock 3-1. Once you receive the License file (ks.license) from Samsung Tech Support, save it in to micro SD card and then power on the device. After 20 seconds, check the Setup Wizard. Please note that the ks.license file can only be used on one device as it is linked to the device information therefore please keep the information in an organized manner 3-2. At this stage you will see the Samsung Account screen. This indicates that the Reactivation lock has been removed & the device is now unlocked. Tap Skip to continue.
<Initial page for Samsung account> 3-3. Download (Flash) Official binary before returning the device to customers. (Device will not work properly with "FMM Unlock Kernel binary")