Академический Документы
Профессиональный Документы
Культура Документы
OSFP Area 0
OSFP Area 3
Lo0: 172.16.32.1/24
Lo1: 172.16.34.1/24
Lo2: 172.16.63.1/24
Lo0: 172.16.1.1/24
Lo1: 172.16.2.1/24
Lo2: 172.16.3.1/24
10.10.10.1/30
10.10.10.2/30
B
200.1.1.1/30
BGP 64100
BGP 65100
200.1.1.2/30
Lo0: 20.20.10.1/24
Lo1: 20.20.20.1/24
Lo2: 20.20.30.1/24
Instructions:
Configure the routers in the topology according to the diagram and the specifications
below.
Requirements:
Add the link between A and B to OSPF Area 0. In addition, add Bs loopbacks
to OSPF Area 0
Add the loopback interfaces on A into OSPF Area 3. Summarize this area
(172.16.32.0/24 172.16.63.0/24) to the backbone with the most efficient
mask
Make sure that all loopback interfaces get advertised with the correct mask
into OSPF
Ensure that when the 172.16.2.0/24 route is advertised to C, that the MED
attribute is changed to 50