Tools needed: tape measure crescent wrench cotton gloves leather gloves angle grinder w/1 regular wheel and 2 cut off wheels drill and 1/2 inch drill bit lenox 2inch hole saw fine file (optional) welder
SPECIAL TOOL: for use with gasifier operation CDN grill surface thermometer GTS800
parts list for gasifier (1) 55 gal. metal drum (1) 120mm ammo can (1) 40mm ammo can--------(.50 cal is optional but not recommended) 6 foot of 2inch high temperature 2 ply hose part# 3631-2.00-6 FOOT can be purchased at this website below https://www.pegasusautoracing.com/pro... 17" of expanded metal or heavy screen (for holding grid for filter media) (2) pipe clamps 2 1/4 to 1 5/16 inch (1)1/2 inch hose to 1/2 inch thread (1) 2inch pipe that is 3inchs long (1)2inch pipe that is 6inchs long (1) red rtv silicone (Napa part num#81160) shredded cardboard and paper for filter media
Generator modification parts NOTE: your generator may be different and require a little different plumbing to carburetor than mine) (3) 1/2 inch hose to 1/2 inch thread 6 feet of 1/2 inch high temp hose ( i used hose rated up to 2oo degrees) (1) 1/2 inch tee threaded male on 2 ends and female on 1 (1) 1/2 inch ball valve (1) 1/2 inch thread to thread nipple (1) half inch union