0 оценок0% нашли этот документ полезным (0 голосов)
80 просмотров1 страница
Lift-up the vehicle. 2) Remove the stabilizer link. NOTE: Install the stabilizer bushing while aligning it with paint mark on stabilizer. Check the bushing for cracks, fatigue or damage, and bushing for protrusions from the hole of stabilizer.
Lift-up the vehicle. 2) Remove the stabilizer link. NOTE: Install the stabilizer bushing while aligning it with paint mark on stabilizer. Check the bushing for cracks, fatigue or damage, and bushing for protrusions from the hole of stabilizer.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
Lift-up the vehicle. 2) Remove the stabilizer link. NOTE: Install the stabilizer bushing while aligning it with paint mark on stabilizer. Check the bushing for cracks, fatigue or damage, and bushing for protrusions from the hole of stabilizer.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
1) Install in the reverse order of removal. A: REMOVAL 1) Lift-up the vehicle. NOTE: 2) Remove the stabilizer link. • Install the stabilizer bushing while aligning it with • Except STi MODEL paint mark on stabilizer. • Ensure the stabilizer bushing and stabilizer have the same identification colors when installing.
(1)
(2)
RS-00100
• STi MODEL RS-00113
(1) Mark painted on stabilizer
(2) Bushing identification color
2) Always tighten the stabilizer bushing location
when tires are in full contact with the ground and the vehicle is curb weight. Tightening torque: Stabilizer link to rear lateral link RS-00010 45 N·m (4.6 kgf-m, 33.2 ft-lb) Stabilizer to stabilizer bracket 3) Remove the bolt and nut which secure the stabi- 25 N·m (2.5 kgf-m, 18.1 ft-lb) lizer to stabilizer bracket. C: INSPECTION 1) Check the bushing for cracks, fatigue or dam- age. 2) Check the stabilizer links for deformities, cracks, or damage, and bushing for protrusions from the hole of stabilizer link.