Академический Документы
Профессиональный Документы
Культура Документы
MK2K-6098-148C-AAEX-602K-7969-****
Windows Vista 6.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0
(Nero Express)
Recorder: <hp DVDRAM GT80N> Version: R102 - HA 1 TA 0 - 8.3.
6.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 768kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <hp DVDRAM GT80N >Version: R102 - HA 1 TA 0 - 8.3
.6.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
: ATA Hitachi HTS54757A50A iaStorA Port 0 ID 0 DMA:
Off
: hp DVDRAM GT80N R102 iaStorA Port 0 ID 0 DMA:
Off
=== CDRom-Device-Map ===
hp DVDRAM GT80N E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 929MB (951664kB)
Free physical memory: 293MB (300200kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.5.2014
===== Disc-Copy over image - 1st step : Copy to image ...
21:10:43 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:10:43 #2 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
21:10:44 #3 Text 0 File DVDCopy.cpp, Line 320
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1605424 NWA -1 (gap 0)
Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
21:10:44 #4 Text 0 File DVDCopy.cpp, Line 435
Max -1 tracks of 1 allowed to copy
1: 0 - 1605424 = 1605424, TRM_DATA_MODE1, block size 2048, rea
d opt 0 (no read options)
21:10:44 #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
21:10:44 #6 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1605423 (356:45.48, 3135MB)
21:10:44 #7 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
21:10:44 #8 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:10:44 #9 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Datos (modo 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1605424 (1605424) = #1605424/356:45.49
not relocatable, disc pos for caching/writing not required/not requi
red
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16
05424 blocks [Image Recorder]
--------------------------------------------------------------
21:10:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
3287908352, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep_____
_____
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1605424 | 1605424 | 0x00
1605424 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:10:44 #11 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-No, small files-No (<64KB)
21:10:44 #12 Phase 120 File dlgbrnst.cpp, Line 1767
Creating the image for burning
21:10:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patc
h infos, orig at #0): write at #0
21:10:44 #14 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
21:18:16 #15 Text 0 File WriterStatus.cpp, Line 245
<Image Recorder> start writing Lead-Out at LBA 1605424 (187F30h), length
0 blocks
21:18:16 #16 Phase 121 File dlgbrnst.cpp, Line 1767
Creating Image completed successfully
21:18:17 #17 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:18:22 #18 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:18:22 #19 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
21:18:22 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:18:24 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3287908352
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Users\DENNIS\Documents\TempImage.nrg>
21:18:25 #3 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:25 #4 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:25 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:25 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:25 #7 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:25 #8 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media
21:18:26 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:26 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:26 #11 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:26 #12 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:18:26 #13 SPTI -1196 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x03606380: Len x20
21:32:04 #14 Phase 40 File dlgbrnst.cpp, Line 1767
Aborted by user
21:32:04 #15 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
21:32:04 #16 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: hp DVDRAM GT80N
Medium not present
21:32:04 #17 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Desconocido. Medium required by compilation: D
VD R/RW; DVD DL; DVD-RAM.)
21:32:04 #18 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon