Вы находитесь на странице: 1из 108

CP LAB 1

SARADA INSTITUTE OF TECNOLOGY &


SCIENCE
SARADA NAGAR, RAGHUNADHAPALEM, KHAMMAM

‘C’ PROGRAMMING & DATA STRUCTURES


LABMANUAL
FOR
I YEAR B.Tech
(Common to All Branches)

Department of
Computer Science & Engineering
&
Information Technology
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 2

COMPUTER PROGRAMMING LAB

Objectives:
 To make the student learn a programming language.
 To teach the student to write programs in C solve the problems
 To Introduce the student to simple linear and non linear data structures such as lists, stacks,
queues, trees and graphs.

Recommended Systems/Software Requirements:

 Intel based desktop PC


 ANSI C Compiler with Supporting Editors

Week l.
a) Write a C program to find the sum of individual digits of a positive integer.
b) A Fibonacci Sequence is defined as follows: the first and second terms in the sequence are 0 and 1.
Subsequent terms are found by adding the preceding two terms in the sequence. Write a C program to
generate the first n terms of the sequence.
c) Write a C program to generate all the prime numbers between 1 and n, where n is a value supplied
by the user.

Week 2.
a) Write a C program to calculate the following Sum:
2 4 6 8 10
Sum=1-x /2! +x /4!-x /6!+x /8!-x /10!
b) Write a C program toe find the roots of a quadratic equation.

Week 3
a) Write C programs that use both recursive and non-recursive functions
i) To find the factorial of a given integer.
ii) To find the GCD (greatest common divisor) of two given integers.
iii) To solve Towers of Hanoi problem.

Week 4
2
a) The total distance travelled by vehicle in ‘t’ seconds is given by distance = ut+1/2at where ‘u’ and
‘a’ are the initial velocity (m/sec.) and acceleration (m/sec2). Write C program to find the distance
travelled at regular intervals of time given the values of ‘u’ and ‘a’. The program should provide the
flexibility to the user to select his own time intervals and repeat the calculations for different values of ‘u’
and ‘a’.
b) Write a C program, which takes two integer operands and one operator form the user, performs the
operation and then prints the result. (Consider the operators +,-,*, /, % and use Switch Statement)

Week 5
a) Write a C program to find both the larges and smallest number in a list of integers.
b) Write a C program that uses functions to perform the following:
i) Addition of Two Matrices

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 3
ii) Multiplication of Two Matrices

Week 6
a) Write a C program that uses functions to perform the following operations:
i) To insert a sub-string in to given main string from a given position.
ii) To delete n Characters from a given position in a given string.
b) Write a C program to determine if the given string is a palindrome or not

Week 7
a) Write a C program that displays the position or index in the string S where the string T begins, or – 1
if S doesn’t contain T.
b) Write a C program to count the lines, words and characters in a given text.

Week 8
a) Write a C program to generate Pascal’s triangle.
b) Write a C program to construct a pyramid of numbers.

Week 9
Write a C program to read in two numbers, x and n, and then compute the sum of this geometric
progression:
1+x+x2+x3+………….+xn
For example: if n is 3 and x is 5, then the program computes 1+5+25+125.
Print x, n, the sum
Perform error checking. For example, the formula does not make sense for negative exponents – if n is
less than 0. Have your program print an error message if n<0, then go back and read in the next pair of
numbers of without computing the sum. Are any values of x also illegal ? If so, test for them too.

Week 10
a) 2’s complement of a number is obtained by scanning it from right to left and complementing all the
bits after the first appearance of a 1. Thus 2’s complement of 11100 is 00100. Write a C program to find
the 2’s complement of a binary number.
b) Write a C program to convert a Roman numeral to its decimal equivalent.

Week 11
Write a C program that uses functions to perform the following operations:
i) Reading a complex number
ii) Writing a complex number
iii) Addition of two complex numbers
iv) Multiplication of two complex numbers
(Note: represent complex number using a structure.)

Week 12
a) Write a C program which copies one file to another.
b) Write a C program to reverse the first n characters in a file.
(Note: The file name and n are specified on the command line.)

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 4
Week 13
Write a C program that uses functions to perform the following operations on singly linked list.:
i) Creation ii) Insertion iii) Deletion iv) Traversal

Week 14
Write a C program that uses functions to perform the following operations on doubly linked list.:
i) Creation ii) Insertion iii) Deletion iv) Traversal in both ways

Week 15
Write C programs that implement stack (its operations) using
i) Arrays ii) Pointers

Week 16
Write C programs that implement Queue (its operations) using
i) Arrays ii) Pointers

Week 17
Write a C program that uses Stack operations to perform the following:
i) Converting infix expression into postfix expression
ii) Evaluating the postfix expression

Week 18
Write a C program that uses functions to perform the following:
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, inorder and postorder.

Week 19
Write C programs that use both recursive and non recursive functions to perform the following
searching operations for a Key value in a given list of integers :
i) Linear search ii) Binary search

Week 20
Write C programs that implement the following sorting methods to sort a given list of integers in
ascending order:
i) Bubble sort ii) Quick sort
Week 21
Write C programs that implement the following sorting methods to sort a given list of integers in
ascending order:
i) Insertion sort ii) Merge sort
Week 22
Write C programs to implement the Lagrange interpolation and Newton- Gregory forward interpolation.

Week 23
Write C programs to implement the linear regression and polynomial regression algorithms.

Week 24
Write C programs to implement Trapezoidal and Simpson methods.

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 1
1. Write a C program to find the sum of individual digits of a
positive integer.

#include <stdio.h>
void main()
{
int num1=0, num2=1,no,counter,fab;
clrscr();
printf("<===========PROGRAM TO FIND THE FIBONACCI SERIES UP TO N NO. IN
SERIES=========>");
printf("\n\n\n\t\tENTER LENGTH OF SERIES (N) : ");
scanf("%d",&no);

printf("\n\n\t\t\t<----FIBONACCI SERIES---->");
printf("\n\n\t\t%d %d",num1,num2);

//LOOP WILL RUN FOR 2 TIME LESS IN SERIES AS THESE WAS PRINTED IN
ADVANCE
for(counter = 1; counter <= no-2; counter++)
{
fab=num1 + num2;
printf(" %d",fab);
num1=num2;
num2=fab;
}
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 2

2. A Fibonacci Sequence is defined as follows: the first and second


terms in the sequence are 0 and 1. Subsequent terms are found by
adding the preceding two terms in the sequence. Write a C program
to generate the first n terms of the sequence.

#include <stdio.h>

void main()
{
int no,counter,counter1,check;
clrscr();
printf("<-----------------------PRIME NO. SERIES------------------------>");
printf("\n\n\n\t\t\tINPUT THE VALUE OF N: ");
scanf("%d",&no);
printf("\n\nTHE PRIME NO. SERIES B/W 1 TO %d : \n\n",no);

for(counter = 1; counter <= no; counter++)


{
check = 0;
//THIS LOOP WILL CHECK A NO TO BE PRIME NO. OR NOT.

for(counter1 = counter-1; counter1 > 1 ; counter1--)


if(counter%counter1 == 0)
{
check++; // INCREMENT CHECK IF NO. IS NOT A PRIME NO.
break;
}
if(check == 0)
printf("%d\t",counter);
}
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 3
3. Write a C program to generate all the prime numbers between 1
and n, where n is a value supplied by the user

#include<stdio.h>
#include<conio.h>

void main()
{
int num, k=1, sum=0;
clrscr();
printf("Enter the number whose digits are to be added:");
scanf("%d",&num);
while(num!=0)
{
k=num%10;
sum=sum+k;
k=num/10;
num=k;
}
printf("Sum of the digits:%d",sum);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 4
4. Write a C program to calculate the following Sum:
Sum=1-x2/2! +x4/4!-x6/6!+x8/8!-x10/10!

#include <stdio.h>
#include <math.h>

void main()
{
int counter,f_coun;
float sum=0,x,power,fact;
clrscr();

printf("<-----------------------PROGRAM FOR SUM OF EQ. SERIES----------------------->");


printf("\n\n\tEQUATION SERIES : 1- X^2/2! + X^4/4! - X^6/6! + X^8/8! - X^10/10!");

printf("\n\n\n\tENTER VALUE OF X : ");


scanf("%f",&x);

for(counter=0, power=0; power<=10; counter++,power=power+2)


{
fact=1;
//CALC FACTORIAL OF POWER VALUE
for(f_coun=power; f_coun>=1; f_coun--)
fact *= f_coun;
//EQ. FOR SUM SERIES
sum=sum+(pow(-1,counter)*(pow(x,power)/fact));
}

printf("SUM : %f",sum);
getch();

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 5
5. Write a C program toe find the roots of a quadratic equation.

#include<stdio.h>
#include<conio.h>
#include<math.h>

void main()
{
float a,b,c,root1,root2;
clrscr();
printf("\n Enter values of a,b,c for finding roots of a quadratic eq:\n");
scanf("%f%f%f",&a,&b,&c);

/*checking condition*/
if(b*b>4*a*c)
{
root1=-b+sqrt(b*b-4*a*c)/2*a;
root2=-b-sqrt(b*b-4*a*c)/2*a;
printf("\n*****ROOTS ARE*****\n");
printf("\n root1=%f\n root2=%f",root1,root2);
}
else
printf("\n Imaginary Roots.");
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 6
6. Write C programs that use both recursive and non-recursive
functions
i) To find the factorial of a given integer.
#include<stdio.h>
#include<conio.h>

unsigned int recr_factorial(int n);


unsigned int iter_factorial(int n);

void main()
{
int n,i;
long fact;
clrscr();
printf("Enter the number: ");
scanf("%d",&n);

if(n==0)
printf("Factorial of 0 is 1\n");
else
{
printf("Factorial of %d Using Recursive Function is %d\n",n,recr_factorial(n));
printf("Factorial of %d Using Non-Recursive Function is %d\n",n,iter_factorial(n));
}
getch();
}

/* Recursive Function*/
unsigned int recr_factorial(int n) {
return n>=1 ? n * recr_factorial(n-1) : 1;
}
/* Non-Recursive Function*/
unsigned int iter_factorial(int n) {
int accu = 1;
int i;
for(i = 1; i <= n; i++) {
accu *= i;
}
return accu;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 7

ii) To find the GCD (greatest common divisor) of two given integers.

#include<stdio.h>
#include<conio.h>
#include<math.h>

unsigned int GcdRecursive(unsigned m, unsigned n);


unsigned int GcdNonRecursive(unsigned p,unsigned q);

int main(void)
{
int a,b,iGcd;
clrscr();

printf("Enter the two numbers whose GCD is to be found: ");


scanf("%d%d",&a,&b);

printf("GCD of %d and %d Using Recursive Function is %d\n",a,b,GcdRecursive(a,b));


printf("GCD of %d and %d Using Non-Recursive Function is
%d\n",a,b,GcdNonRecursive(a,b));

getch();
}

/* Recursive Function*/
unsigned int GcdRecursive(unsigned m, unsigned n)
{
if(n>m)
return GcdRecursive(n,m);
if(n==0)
return m;
else
return GcdRecursive(n,m%n);
}

/* Non-Recursive Function*/
unsigned int GcdNonRecursive(unsigned p,unsigned q)
{
unsigned remainder;

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 8
remainder = p-(p/q*q);

if(remainder==0)
return q;
else
GcdRecursive(q,remainder);
}

iii) To solve Towers of Hanoi problem.

#include<conio.h>
#include<stdio.h>

/* Non-Recursive Function*/
void hanoiNonRecursion(int num,char sndl,char indl,char dndl)
{
char stkn[100],stksndl[100],stkindl[100],stkdndl[100],stkadd[100],temp;
int top,add;
top=NULL;

one:
if(num==1)
{
printf("\nMove top disk from needle %c to needle %c ",sndl,dndl);
goto four;
}
two:
top=top+1;
stkn[top]=num;
stksndl[top]=sndl;
stkindl[top]=indl;
stkdndl[top]=dndl;
stkadd[top]=3;
num=num-1;
sndl=sndl;
temp=indl;
indl=dndl;
dndl=temp;

goto one;

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 9

three:
printf("\nMove top disk from needle %c to needle %c ",sndl,dndl);
top=top+1;
stkn[top]=num;
stksndl[top]=sndl;
stkindl[top]=indl;
stkdndl[top]=dndl;
stkadd[top]=5;
num=num-1;
temp=sndl;
sndl=indl;
indl=temp;
dndl=dndl;

goto one;

four:
if(top==NULL)
return;
num=stkn[top];
sndl=stksndl[top];
indl=stkindl[top];
dndl=stkdndl[top];
add=stkadd[top];
top=top-1;
if(add==3)
goto three;
else if(add==5)
goto four;
}

/* Recursive Function*/
void hanoiRecursion( int num,char ndl1, char ndl2, char ndl3)
{
if ( num == 1 ) {
printf( "Move top disk from needle %c to needle %c.", ndl1, ndl2 );
return;
}

hanoiRecursion( num - 1,ndl1, ndl3, ndl2 );


SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 10
printf( "Move top disk from needle %c to needle %c.", ndl1, ndl2 );
hanoiRecursion( num - 1,ndl3, ndl2, ndl1 );
}

void main()
{
int no;
clrscr();
printf("Enter the no. of disks to be transferred: ");
scanf("%d",&no);

if(no<1)
printf("\nThere's nothing to move.");
else
printf("Non-Recursive");
hanoiNonRecursion(no,'A','B','C');
printf("\nRecursive");
hanoiRecursion(no,'A','B','C');

getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 11
7. The total distance travelled by vehicle in ‘t’ seconds is given by
distance = ut+1/2at2 where ‘u’ and ‘a’ are the initial velocity
(m/sec.) and acceleration (m/sec2). Write C program to find the
distance travelled at regular intervals of time given the values of ‘u’
and ‘a’. The program should provide the flexibility to the user to
select his own time intervals and repeat the calculations for different
values of ‘u’ and ‘a’.

#include <stdio.h>
#include <math.h>

void main()
{
int tim_intrval, counter,time;
float accl, distance=0, velos;
clrscr();
printf("<===========PROGRAM FOR CALC TOTAL DISTANCE TRAVELED BY A
VECHIAL===========>");
printf("\n\n\n\t\t\tNO OF TIME INTERVALS : ");
scanf("%d",&tim_intrval);

for(counter = 1; counter <= tim_intrval; counter++)


{
printf("\n\t\t\tAT T%d TIME(sec) : ",counter);
scanf("%d",&time);
printf("\t\t\tVELOCITY AT %d sec (m/sec) : ",time);
scanf("%f",&velos);
printf("\t\t\tACCLERATION AT %d sec (m/sec^2): ",time);
scanf("%f",&accl);
distance += (velos*time + (accl*pow(time,2))/2);
}

printf("\n\n\n\tTOTAL DISTANCE TRAVELLED BY VEHICLE IN %d INTERVALS OF


TIME : %f",tim_intrval,distance);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 12
8. Write a C program, which takes two integer operands and one
operator form the user, performs the operation and then prints the
result. (Consider the operators +,-,*, /, % and use Switch Statement)

#include<stdio.h>
#include<conio.h>

void main()
{
int a,b,res,ch;
clrscr();
printf("\t *********************");
printf("\n\tMENU\n");
printf("\t********************");
printf("\n\t(1)ADDITION");
printf("\n\t(2)SUBTRACTION");
printf("\n\t(3)MULTIPLICATION");
printf("\n\t(4)DIVISION");
printf("\n\t(5)REMAINDER");
printf("\n\t(0)EXIT");
printf("\n\t********************");
printf("\n\n\tEnter your choice:");
scanf("%d",&ch);

if(ch<=5 & ch>0)


{
printf("Enter two numbers:\n");
scanf("%d%d",&a,&b);
}

switch(ch)
{
case 1:
res=a+b;
printf("\n Addition:%d",res);
break;

case 2:
res=a-b;
printf("\n Subtraction:%d",res);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 13
break;

case 3:
res=a*b;
printf("\n Multiplication:%d",res);
break;

case 4:
res=a/b;
printf("\n Division:%d",res);
break;

case 5:
res=a%b;
printf("\n Remainder:%d",res);
break;

case 0:
printf("\n Choice Terminated");
exit();
break;

default:
printf("\n Invalid Choice");
}
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 14
9. Write a C program to find both the larges and smallest number in
a list of integers.

main( )
{
float largest(float a[ ], int n);
float value[4] = {2.5,-4.75,1.2,3.67};
printf("%f\n", largest(value,4));
}
float largest(float a[], int n)
{
int i;
float max;
max = a[0];
for(i = 1; i < n; i++)
if(max < a[i])
max = a[i];
return(max);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 15
10. Write a C program that uses functions to perform the following:
i) Addition of Two Matrices
ii) Multiplication of Two Matrices

#include<stdio.h>

void main()
{
int ch,i,j,m,n,p,q,k,r1,c1,a[10][10],b[10][10],c[10][10];
clrscr();
printf("************************************");
printf("\n\t\tMENU");
printf("\n**********************************");
printf("\n[1]ADDITION OF TWO MATRICES");
printf("\n[2]MULTIPLICATION OF TWO MATRICES");
printf("\n[0]EXIT");
printf("\n**********************************");
printf("\n\tEnter your choice:\n");
scanf("%d",&ch);

if(ch<=2 & ch>0)


{
printf("Valid Choice\n");
}

switch(ch)
{
case 1:
printf("Input rows and columns of A & B Matrix:");
scanf("%d%d",&r1,&c1);
printf("Enter elements of matrix A:\n");
for(i=0;i<r1;i++)
{
for(j=0;j<c1;j++)
scanf("%d",&a[i][j]);
}
printf("Enter elements of matrix B:\n");
for(i=0;i<r1;i++)
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 16
for(j=0;j<c1;j++)
scanf("%d",&b[i][j]);
}
printf("\n =====Matrix Addition=====\n");
for(i=0;i<r1;i++)
{
for(j=0;j<c1;j++)
printf("%5d",a[i][j]+b[i][j]);
printf("\n");
}
break;

case 2:
printf("Input rows and columns of A matrix:");
scanf("%d%d",&m,&n);
printf("Input rows and columns of B matrix:");
scanf("%d%d",&p,&q);
if(n==p)
{
printf("matrices can be multiplied\n");
printf("resultant matrix is %d*%d\n",m,q);
printf("Input A matrix\n");
read_matrix(a,m,n);
printf("Input B matrix\n");
/*Function call to read the matrix*/
read_matrix(b,p,q);
/*Function for Multiplication of two matrices*/
printf("\n =====Matrix Multiplication=====\n");
for(i=0;i<m;++i)
for(j=0;j<q;++j)
{
c[i][j]=0;
for(k=0;k<n;++k)
c[i][j]=c[i][j]+a[i][k]*b[k][j];
}

printf("Resultant of two matrices:\n");


write_matrix(c,m,q);
}
/*end if*/
else
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 17
{
printf("Matrices cannot be multiplied.");
}
/*end else*/
break;

case 0:
printf("\n Choice Terminated");
exit();
break;

default:
printf("\n Invalid Choice");
}
getch();
}

/*Function read matrix*/


int read_matrix(int a[10][10],int m,int n)
{
int i,j;
for(i=0;i<m;i++)
for(j=0;j<n;j++)
scanf("%d",&a[i][j]);
return 0;
}

/*Function to write the matrix*/


int write_matrix(int a[10][10],int m,int n)
{
int i,j;
for(i=0;i<m;i++)
{
for(j=0;j<n;j++)
printf("%5d",a[i][j]);
printf("\n");
}
return 0;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 18
11. Write a C program that uses functions to perform the following
operations:
i) To insert a sub-string in to given main string from a given
position.

#include <stdio.h>
#include <conio.h>
#include <string.h>

void main()
{
char a[10];
char b[10];
char c[10];
int p=0,r=0,i=0;
int t=0;
int x,g,s,n,o;
clrscr();

puts("Enter First String:");


gets(a);
puts("Enter Second String:");
gets(b);
printf("Enter the position where the item has to be inserted: ");
scanf("%d",&p);
r = strlen(a);
n = strlen(b);
i=0;

// Copying the input string into another array


while(i <= r)
{
c[i]=a[i];
i++;
}
s = n+r;
o = p+n;

// Adding the sub-string

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 19
for(i=p;i<s;i++)
{
x = c[i];
if(t<n)
{
a[i] = b[t];
t=t+1;
}
a[o]=x;
o=o+1;
}

printf("%s", a);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 20
ii) To delete n Characters from a given position in a given string.

#include <stdio.h>
#include <conio.h>
#include <string.h>

void delchar(char *x,int a, int b);

void main()
{
char string[10];
int n,pos,p;
clrscr();

puts("Enter the string");


gets(string);
printf("Enter the position from where to delete");
scanf("%d",&pos);
printf("Enter the number of characters to be deleted");
scanf("%d",&n);
delchar(string, n,pos);
getch();
}

// Function to delete n characters


void delchar(char *x,int a, int b)
{
if ((a+b-1) <= strlen(x))
{
strcpy(&x[b-1],&x[a+b-1]);
puts(x);
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 21
12. Write a C program to determine if the given string is a
palindrome or not

#include<stdio.h>
#include<string.h>

enum Boolean{false,true};
enum Boolean IsPalindrome(char string[])
{
int left,right,len=strlen(string);
enum Boolean matched=true;
if(len==0)
return 0;
left=0;
right=len-1;

/* Compare the first and last letter,second & second last & so on */
while(left<right&&matched)
{
if(string[left]!=string[right])
matched=false;
else
{
left++;
right--;
}
}
return matched;
}

int main()
{
char string[40];
clrscr();
printf("****Program to test if the given string is a palindrome****\n");
printf("Enter a string:");
scanf("%s",string);
if(IsPalindrome(string))
printf("The given string %s is a palindrome\n",string);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 22
else
printf("The given string %s is not a palindrome\n",string);
getch();
return 0;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 23
13. Write a C program that displays the position or index in the
string S where the string T begins, or – 1 if S doesn’t contain T.

#include<stdio.h>
#include<string.h>
#include<conio.h>

void main()
{
char s[30], t[20];
char *found;
clrscr();

/* Entering the main string */


puts("Enter the first string: ");
gets(s);

/* Entering the string whose position or index to be displayed */


puts("Enter the string to be searched: ");
gets(t);

/*Searching string t in string s */


found=strstr(s,t);
if(found)
printf("Second String is found in the First String at %d position.\n",found-s);
else
printf("-1");
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 24
14. Write a C program to count the lines, words and characters in a
given text.
#include <stdio.h>
main()
{
char line[81], ctr;
int i,c,
end = 0,
characters = 0,
words = 0,
lines = 0;
printf("KEY IN THE TEXT.\n");
printf("GIVE ONE SPACE AFTER EACH WORD.\n");
printf("WHEN COMPLETED, PRESS 'RETURN'.\n\n");
while( end == 0)
{
/* Reading a line of text */
c = 0;
while((ctr=getchar()) != '\n')
line[c++] = ctr;
line[c] = '\0';
/* counting the words in a line */
if(line[0] == '\0')
break ;
else
{
words++;
for(i=0; line[i] != '\0';i++)
if(line[i] == ' ' || line[i] == '\t')
words++;
}
/* counting lines and characters */
lines = lines +1;
characters = characters + strlen(line);
}
printf ("\n");
printf("Number of lines = %d\n", lines);
printf("Number of words = %d\n", words);
printf("Number of characters = %d\n", characters);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 25
15. Write a C program to generate Pascal’s triangle.

#include<stdio.h>
#include<conio.h>

void main()
{
int bin,p,q,r,x;
clrscr();
bin=1;
q=0;

printf("Rows you want to input:");


scanf("%d",&r);

printf("\nPascal's Triangle:\n");

while(q<r)
{
for(p=40-3*q;p>0;--p)
printf(" ");
for(x=0;x<=q;++x)
{
if((x==0)||(q==0))
bin=1;
else
bin=(bin*(q-x+1))/x;
printf("%6d",bin);
}

printf("\n");
++q;
}
getch();
}

16. Write a C program to construct a pyramid of numbers.

#include<stdio.h>
#include<conio.h>

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 26

void main()
{
int num,i,y,x=35;
clrscr();
printf("\nEnter the number to generate the pyramid:\n");
scanf("%d",&num);

for(y=0;y<=num;y++)
{
/*(x-coordinate,y-coordinate)*/
gotoxy(x,y+1);

/*for displaying digits towards the left and right of zero*/


for(i=0-y;i<=y;i++)

printf("%3d",abs(i));
x=x-3;
}
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 27
17. Write a C program to read in two numbers, x and n, and then
compute the sum of this geometric progression:
1+x+x2+x3+………….+xn
For example: if n is 3 and x is 5, then the program computes
1+5+25+125.
Print x, n, the sum
Perform error checking. For example, the formula does not make
sense for negative exponents – if n is less than 0. Have your program
print an error message if n<0, then go back and read in the next pair
of numbers of without computing the sum. Are any values of x also
illegal ? If so, test for them too.

#include<stdio.h>
#include<conio.h>
#include<math.h>

void main()
{
int s_sum,i,x,n;
clrscr();
printf("Enter the values for x and n:");
scanf("%d %d",&x,&n);

if(n<=0 || x<=0)
{
printf("Value is not valid\n");
}
else
{
printf("Value is valid\n");
s_sum=1;
for(i=1;i<=n;i++)
{
s_sum=s_sum+pow(x,i);
}
printf("Sum of series=%d\n",s_sum);
}
getch();

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 28
}
18. 2’s complement of a number is obtained by scanning it from right
to left and complementing all the bits after the first appearance of a 1.
Thus 2’s complement of 11100 is 00100. Write a C program to find the
2’s complement of a binary number.

#include <stdio.h>
#include<conio.h>

void complement (char *a);


void main()
{
char a[16];
int i;
clrscr();
printf("Enter the binary number");
gets(a);
for(i=0;a[i]!='\0'; i++)
{
if (a[i]!='0' && a[i]!='1')
{
printf("The number entered is not a binary number. Enter the correct number");
exit(0);
}
}
complement(a);
getch();
}
void complement (char *a)
{
int l, i, c=0;
char b[16];
l=strlen(a);
for (i=l-1; i>=0; i--)
{
if (a[i]=='0')
b[i]='1';
else
b[i]='0';
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 29
for(i=l-1; i>=0; i--)
{
if(i==l-1)
{
if (b[i]=='0')
b[i]='1';
else
{
b[i]='0';
c=1;
}
}
else
{
if(c==1 && b[i]=='0')
{
b[i]='1';
c=0;
}
else if (c==1 && b[i]=='1')
{
b[i]='0';
c=1;
}
}
}
b[l]='\0';
printf("The 2's complement is %s", b);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 30
19. Write a C program to convert a Roman numeral to its decimal
equivalent.

#include<stdio.h>
#include<conio.h>
#include<string.h>
#include<stdlib.h>

void main()
{

int *a,len,i,j,k;
char *rom;

clrscr();

printf("Enter the Roman Numeral:");


scanf("%s",rom);

len=strlen(rom);

for(i=0;i<len;i++)
{
if(rom[i]=='I')
a[i]=1;
else if(rom[i]=='V')
a[i]=5;
else if(rom[i]=='X')
a[i]=10;
else if(rom[i]=='L')
a[i]=50;
else if(rom[i]=='C')
a[i]=100;
else if(rom[i]=='D')
a[i]=500;
else if(rom[i]=='M')
a[i]=1000;
else
{
printf("\nInvalid Value");

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 31
getch();
exit(0);
}
}
k=a[len-1];
for(i=len-1;i>0;i--)
{
if(a[i]>a[i-1])
k=k-a[i-1];
else if(a[i]==a[i-1] || a[i]<a[i-1])
k=k+a[i-1];
}
printf("\nIts Decimal Equivalent is:");
printf("%d",k);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 32
20. Write a C program that uses functions to perform the following
operations:
i) Reading a complex number
ii) Writing a complex number
iii) Addition of two complex numbers
iv) Multiplication of two complex numbers
(Note: represent complex number using a structure.)

#include<stdio.h>
#include<math.h>

void arithmetic(int opern);

struct comp
{
double realpart;
double imgpart;
};

void main()
{
int opern;
clrscr();
printf("\n\n \t\t\t***** MAIN MENU *****");
printf("\n\n Select your option: \n 1 : ADD\n 2 : MULTIPLY\n 0 : EXIT \n\n\t\t Enter your
Option [ ]\b\b");

scanf("%d",&opern);

switch(opern)
{
case 0:
exit(0);
case 1:
case 2:
arithmetic(opern);
default:
main();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 33

void arithmetic(int opern)


{

struct comp w1, w2, w;

printf("\n Enter two Complex Numbers (x+iy):\n Real Part of First Number:");
scanf("%lf",&w1.realpart);
printf("\n Imaginary Part of First Number:");
scanf("%lf",&w1.imgpart);
printf("\n Real Part of Second Number:");
scanf("%lf",&w2.realpart);
printf("\n Imaginary Part of Second Number:");
scanf("%lf",&w2.imgpart);

switch(opern)
{

/*addition of complex number*/


case 1:
w.realpart = w1.realpart+w2.realpart;
w.imgpart = w1.imgpart+w2.imgpart;
break;

/*multiplication of complex number*/


case 2:
w.realpart=(w1.realpart*w2.realpart)-(w1.imgpart*w2.imgpart);
w.imgpart=(w1.realpart*w2.imgpart)+(w1.imgpart*w2.realpart);
break;
}

if (w.imgpart>0)
printf("\n Answer = %lf+%lfi",w.realpart,w.imgpart);
else
printf("\n Answer = %lf%lfi",w.realpart,w.imgpart);
getch();
main();
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 34
}

21. Write a C program which copies one file to another.

#include <stdio.h>
#include <conio.h>
#include <process.h>
void main(int argc, char *argv[])
{
FILE *fs,*ft;
char ch;
clrscr();
if(argc!=3)
{
puts("Invalid number of arguments.");
exit(0);
}
fs = fopen(argv[1],"r");
if(fs==NULL)
{
puts("Source file cannot be opened.");
exit(0);
}
ft = fopen(argv[2],"w");
if (ft==NULL)
{
puts("Target file cannot be opened.");
fclose(fs);
exit(0);
}
while(1)
{
ch=fgetc(fs);
if (ch==EOF)
break;
else
fputc(ch,ft);
}
fclose(fs);
fclose(ft);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 35
getch();
}
22. Write a C program to reverse the first n characters in a file.
(Note: The file name and n are specified on the command line.)
#include <stdio.h>
#include <conio.h>
#include <string.h>
#include <process.h>
void main(int argc, char *argv[])
{
char a[15];
char s[20];
char n;
int k;
int j=0;
int i;
int len;
FILE *fp;
if(argc!=3)
{
puts("Improper number of arguments.");
exit(0);
}
fp = fopen(argv[1],"r");
if(fp == NULL)
{
puts("File cannot be opened.");
exit(0);
}
k=*argv[2]-48;
n = fread(a,1,k,fp);
a[n]='\0';
len=strlen(a);
for(i=len-1;i>=0;i--)
{
s[j]=a[i];
printf("%c",s[j]);
j=j+1;
}
s[j+1]='\0';

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 36
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 37
23. Write a C program that uses functions to perform the following
operations on singly linked list.:
i) Creation ii) Insertion iii) Deletion iv) Traversal
i) Creation

#include <stdio.h>
#include <stdlib.h>
#define NULL 0

struct linked_list
{
int number;
struct linked_list *next;
};
typedef struct linked_list node; /* node type defined */

main()
{
node *head;
void create(node *p);
int count(node *p);
void print(node *p);
head = (node *)malloc(sizeof(node));
create(head);
printf("\n");
printf(head);
printf("\n");
printf("\nNumber of items = %d \n", count(head));
}
void create(node *list)
{
printf("Input a number\n");
printf("(type -999 at end): ");
scanf("%d", &list -> number); /* create current node */

if(list->number == -999)
{
list->next = NULL;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 38
else /*create next node */
{
list->next = (node *)malloc(sizeof(node));
create(list->next); */ Recursion occurs */
}
return;
}
void print(node *list)
{
if(list->next != NULL)
{
printf("%d-->",list ->number); /* print current item */

if(list->next->next == NULL)
printf("%d", list->next->number);

print(list->next); /* move to next item */


}
return;
}

int count(node *list)


{
if(list->next == NULL)
return (0);
else
return(1+ count(list->next));
}

ii) Insertion

node *insert(node *head)


{
node *find(node *p, int a);
node *new; /* pointer to new node */
node *n1; /* pointer to node preceding key node */
int key;
int x; /* new item (number) to be inserted */

printf("Value of new item?");

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 39
scanf("%d", &x);
printf("Value of key item ? (type -999 if last) ");
scanf("%d", &key);

if(head->number == key) /* new node is first */


{
new = (node *)malloc(size of(node));
new->number = x;
new->next = head;
head = new;
}
else /* find key node and insert new node */
{ /* before the key node */
n1 = find(head, key); /* find key node */

if(n1 == NULL)
printf("\n key is not found \n");
else /* insert new node */
{
new = (node *)malloc(sizeof(node));
new->number = x;
new->next = n1->next;
n1->next = new;
}
}
return(head);
}
node *find(node *lists, int key)
{
if(list->next->number == key) /* key found */
return(list);
else

if(list->next->next == NULL) /* end */


return(NULL);
else
find(list->next, key);
}

iii) Deletion

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 40
node *delete(node *head)
{
node *find(node *p, int a);
int key; /* item to be deleted */
node *n1; /* pointer to node preceding key node */
node *p; /* temporary pointer */
printf("\n What is the item (number) to be deleted?");
scanf("%d", &key);
if(head->number == key) /* first node to be deleted) */
{
p = head->next; /* pointer to 2nd node in list */
free(head); /* release space of key node */
head = p; /* make head to point to 1st node */
}
else
{
n1 = find(head, key);
if(n1 == NULL)
printf("\n key not found \n");
else /* delete key node */
{
p = n1->next->next; /* pointer to the node
following the keynode */

free(n1->next); /* free key node */


n1->next = p; /* establish link */
}
}
return(head);
}

iv) Traversal

#include <stdio.h>
#include <stdlib.h>
#define NULL 0

struct linked_list
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 41
int number;
struct linked_list *next;
};
typedef struct linked_list node;

main ()
{
int n;
node *head = NULL;
void print(node *p);
node *insert_Sort(node *p, int n);

printf("Input the list of numbers.\n");


printf("At end, type -999.\n");
scanf("%d",&n);

while(n != -999)
{
if(head == NULL) /* create 'base' node */
{
head = (node *)malloc(sizeof(node));
head ->number = n;
head->next = NULL;

else /* insert next item */


{
head = insert_sort(head,n);
}
scanf("%d", &n);
}
printf("\n");
print(head);
print("\n");
}
node *insert_sort(node *list, int x)
{
node *p1, *p2, *p;
p1 = NULL;
p2 = list; /* p2 points to first node */
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 42

for( ; p2->number < x ; p2 = p2->next)


{
p1 = p2;

if(p2->next == NULL)
{
p2 = p2->next; /* p2 set to NULL */
break; /* insert new node at end */
}
}

/* key node found */


p = (node *)malloc(sizeof(node)); /* space for new node */
p->number = x; /* place value in the new node */
p->next = p2; /* link new node to key node */
if (p1 == NULL)
list = p; /* new node becomes the first
node */
else
p1->next = p; /* new node inserted after
1st node */
return (list);
}
void print(node *list)
{
if (list == NULL)
printf("NULL");
else
{
printf("%d-->",list->number);
print(list->next);
}
return;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 43
24. Write a C program that uses functions to perform the following
operations on doubly linked list.:
i) Creation ii) Insertion iii) Deletion iv) Traversal in both ways
#include "stdio.h"
#include "alloc.h"

typedef struct dubll


{
int data;
struct dubll *leftlink,*rightlink;
}*DUBLL;

DUBLL high,temp_node,low,last,pntr;
int flag=0;

DUBLL NodeAlloc();
DUBLL Search(int,int);

void CreateItem();
void AppendItem();
void PrintItem();
void DeleteItem();
DUBLL Search(int item,int flag);
DUBLL NodeAlloc();
void InsertItem();

void main(void)
{
int choice,Item;
high=NULL;
while(1)
{
clrscr();
printf("\n \t\t\t***** M A I N M E N U *****\n\n");
printf("\n 1: Create Linked List \n 2: Append a Node to the List \n 3: Traverse the List \n
4: Delete a Node from the List \n 5: Search a Node \n 6: Insert a Node to the List \n 7:
Close \n\n\t\t Enter your Option [ ]\b\b");
scanf("%d",&choice);
switch(choice)
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 44
case 1:
CreateItem();
puts("\nPress any key to go back to main menu.");
getch();
break;
case 2:
AppendItem();
break;
case 3:
PrintItem();
puts("\nPress any key to go back to main menu.");
getch();
break;
case 4:
DeleteItem();
break;
case 5:
printf("Find an Item: ");
scanf("%d",&Item);
temp_node=Search(Item,0);
if(temp_node)
{
puts("The item is available in the Linked List.");
}
else
{
puts("The item is not found in the Linked List.");
}
getch();
break;
case 6:
InsertItem();
break;
case 7:
exit();
default:
puts("Invalid choice.");
puts("\nPress any key to go back to main menu.");
getch();
break;
}
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 45
}
}

/* Function to Create the list*/


void CreateItem()
{
if(high==NULL)
{
printf("\n --Creating the list--");
temp_node=NodeAlloc();
printf("\n Enter starting data (as integer value) :");
scanf("%d",&temp_node->data);
high=temp_node;
}
else{ printf("\n List already created @ %d with %d as data.",high,high->data);}
}

/* Function to Append items to the list*/


void AppendItem()
{
low=high;
if(high==NULL)
{
CreateItem();
}
else
{
temp_node=NodeAlloc();
printf("\n Enter Item (in integer) :");
scanf("%d",&temp_node->data);
temp_node->rightlink=NULL;

while(low->rightlink!=NULL)
low=low->rightlink;
low->rightlink=temp_node;
temp_node->leftlink=low;
last=low->rightlink;

}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 46
/* Function to Traverse the list both ways and print the data*/
void PrintItem()
{
DUBLL temp_node;
if(high==NULL)
{
printf("\n List is not available. Please create a list first.");
getch();
CreateItem();
}
temp_node=high;
last=low->rightlink;
printf("\n--Printing The List In Forward direction--\n");

while(temp_node!=NULL) //In forward direction


{
printf("\t %d",temp_node->data);
temp_node = temp_node->rightlink;
}
printf("\n");
printf("\n--Printing The List In Backward direction--\n");
temp_node=high;
if(temp_node->rightlink==NULL){printf("%d",temp_node->data);return; }
while(last!=NULL) //In backward direction
{
printf("\t %d",last->data);
last = last->leftlink;
}
}

/* Function to Delete items of the list*/


void DeleteItem()
{
int value;
DUBLL temp_node;
if(high==NULL)
{
printf("\n List is not available. Please create a list first.");
getch();
CreateItem();
}
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 47
printf("\n Item to delete :");
scanf("%d",&value);
pntr=Search(value,1);
pntr->leftlink->rightlink=pntr->rightlink;
pntr->rightlink->leftlink=pntr->leftlink;
temp_node=pntr;
free(temp_node);
}

/* Function to Search an item from the list*/


DUBLL Search(int item,int flag)
{
temp_node = high;
if(high==NULL)
{
printf("\n List is not available. Please create a list first.");
getch();
CreateItem();
}
while(temp_node!=NULL)
{
if(temp_node->data==item )
{
if(flag==0)
{
return(1);
}
else
{
return(temp_node);
}
}
temp_node=temp_node->rightlink;
}
}

/* Function to Allocate nodes*/


DUBLL NodeAlloc()
{
DUBLL tmep_node;
tmep_node=malloc(sizeof(struct dubll));
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 48
if(tmep_node==NULL)
{
printf("\n No memory available. Node allocation cannot be done.");
}
tmep_node->rightlink=tmep_node->leftlink=NULL;
return(tmep_node);
}

/* Function to Insert items in the middle of the list*/


void InsertItem()
{
int node;
DUBLL temp_node;

if(high==NULL)
{
printf("\n List is not available. Please create a list first.");
getch();
CreateItem();
}
temp_node=NodeAlloc();
printf("Position At which node to be inserted: ___ & New Item Value: ___ ");
scanf("%d",&node);
scanf("%d",&temp_node->data);
pntr=Search(node,1);

if(pntr->rightlink==NULL){printf("\n The operation is not possible."); getch();return;}


temp_node->leftlink=pntr; //creating link to new node
temp_node->rightlink=pntr->rightlink;

pntr->rightlink->leftlink=temp_node;
pntr->rightlink=temp_node;

printf("\n Item has been Inserted.");


getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 49
25. Write C programs that implement stack (its operations) using
i) Arrays

#include<stdio.h>
#include<conio.h>

int st_arr[20];
int t=-1;

void push_ele(int ele);


int pop_ele();
void display_ele();

void main()
{
char choice,num1=0,num2=0;
while(1)
{
clrscr();
printf("======================================");
printf("\n\t\t MENU ");
printf("\n======================================");
printf("\n[1] Using Push Function");
printf("\n[2] Using Pop Function");
printf("\n[3] Elements present in Stack");
printf("\n[4] Exit\n");
printf("\n\tEnter your choice: ");
fflush(stdin);
scanf("%c",&choice);

switch(choice-'0')
{

case 1:
{
printf("\n\tElement to be pushed: ");
scanf("%d",&num1);
push_ele(num1);
break;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 50

case 2:
{
num2=pop_ele(1);
printf("\n\tElement to be popped: %d\n\t",num2);
getch();
break;
}

case 3:
{
display_ele();
getch();
break;
}

case 4:
exit(1);
break;

default:
printf("\nYour choice is invalid.\n");
break;
}
}
}

/*Implementing the push() function. */


void push_ele(int ele)
{
if(t==99)
{
printf("STACK is Full.\n");
getch();
exit(1);
}
st_arr[++t]=ele;
}

/*Implementing the pop() function. */


int pop_ele()
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 51
{
int ele1;
if(t==-1)
{
printf("\n\tSTACK is Empty.\n");
getch();
exit(1);
}
return(st_arr[t--]);
}

/*Implementing display() function. */


void display_ele()
{
int k;
printf("\n\tElements present in the stack are:\n\t");
for(k=0;k<=t;k++)
printf("%d\t",st_arr[k]);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 52
Write C programs that implement stack (its operations) using
ii) Pointers
#include<stdio.h>
#include<conio.h>

struct st_point
{
int ele;
struct st_point *l;
}

*t;
int i;

void push_ele(int j);


int pop_ele();
void display_ele();

void main()
{
char choice,num1=0,num2=0;
int i;
while(1)
{
clrscr();
printf("======================================");
printf("\n\t\t MENU ");
printf("\n======================================");
printf("\n[1] Using Push Function");
printf("\n[2] Using Pop Function");
printf("\n[3] Elements present in Stack");
printf("\n[4] Exit\n");
printf("\n\tEnter your choice: ");
fflush(stdin);
scanf("%c",&choice);

switch(choice-'0')
{
case 1:
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 53
printf("\n\tElement to be pushed:");
scanf("%d",&num1);
push_ele(num1);
break;
}

case 2:
{
num2=pop_ele(1);
printf("\n\tElement to be popped: %d\n\t",num2);
getch();
break;
}

case 3:
{
printf("\n\tElements present in the stack are:\n\t");
display_ele();
getch();
break;
}

case 4:
exit(1);
break;

default:
printf("\nYour choice is invalid.\n");
break;
}
}
}

/*Inserting the elements using push function*/


void push_ele(int j)
{
struct st_point *m;
m=(struct st_point*)malloc(sizeof(struct st_point));
m->ele=j;
m->l=t;
t=m;
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 54
return;
}

/*Removing the elements using pop function*/


int pop_ele()
{
if(t==NULL)
{
printf("\n\STACK is Empty.");
getch();
exit(1);
}
else
{
int i=t->ele;
t=t->l;
return (i);
}
return 0;
}

/*Displaying the elements */


void display_ele()
{
struct st_point *pointer=NULL;
pointer=t;
while(pointer!=NULL)
{
printf("%d\t",pointer->ele);
pointer=pointer->l;
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 55
26. Write C programs that implement Queue (its operations) using
i) Arrays

#include<stdio.h>
#include<alloc.h>
#include<conio.h>
#define size 10
#define true 1
#define false 0

struct q_arr
{
int f,r;
int num;
int a[size];
};

void init(struct q_arr* queue);


int e_que(struct q_arr* queue);
int f_que(struct q_arr* queue);
int add_ele(struct q_arr* queue,int);
int rem_ele(struct q_arr* queue);
void display_ele(struct q_arr* queue);

/*main function*/
void main()
{
int ele,k;
int ch;

struct q_arr *queue = (struct q_arr*)malloc(sizeof(struct q_arr));


init(queue);

while(1)
{
clrscr();
printf("\n\n****IMPLEMENTATION OF QUEUE USING ARRAYS****\n");
printf("============================================");
printf("\n\t\tMENU\n");
printf("============================================");

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 56
printf("\n\t[1] To insert an element");
printf("\n\t[2] To remove an element");
printf("\n\t[3] To display all the elements");
printf("\n\t[4] Exit");
printf("\n\n\t Enter your choice: ");
scanf("%d",&ch);

switch(ch)
{
case 1:
{
printf("\nElement to be inserted:");
scanf("%d",&ele);
add_ele(queue,ele);
break;
}

case 2:
{
if(!e_que(queue))
{
k=rem_ele(queue);
printf("\n%d element is removed\n",k);
getch();
}
else
{
printf("\tQueue is Empty. No element can be removed.");
getch();
}
break;
}

case 3:
{
display_ele(queue);
getch();
break;
}

case 4:
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 57
exit(0);

default:
printf("\tInvalid Choice.");
getch();
break;
}
}
}
/*end main*/

void init(struct q_arr* queue)


{
queue->f = 0;
queue->r = -1;
queue->num = 0;
}

/* Function to check is the queue is empty*/


int e_que(struct q_arr* queue)
{
if(queue->num==0)
return true;
return false;
}

/* Function to check if the queue is full*/


int f_que(struct q_arr* queue)
{
if(queue->num == size)
return true;
return false;
}

/* Function to add an element to the queue*/


int add_ele(struct q_arr* queue,int j)
{
if(f_que(queue))
return false;

if(queue->r == size - 1)
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 58
queue->r = -1;
queue->a[++queue->r] = j;
queue->num++;
return true;
}

/* Function to remove an element of the queue*/


int rem_ele(struct q_arr* queue)
{
int j;
if(e_que(queue))
return -9999;
j = queue->a[queue->f++];
if(queue->f == size)
queue->f = 0;
queue->num--;
return j;
}

/* Function to display the queue*/


void display_ele(struct q_arr* queue)
{
int j;
if(e_que(queue))
{
printf("Queue is Empty. No records to display.");
return;
}
printf("\nElements present in the Queue are: ");
for(j=queue->f;j<=queue->r;j++)
printf("%d\t",queue->a[j]);
printf("\n");
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 59
Write C programs that implement Queue (its operations) using
ii) Pointers

#define true 1
#define false 0

#include<stdio.h>
#include<conio.h>
#include<process.h>

struct q_point
{
int ele;
struct q_point* n;
};

struct q_point *f_ptr = NULL;

int e_que(void);
void add_ele(int);
int rem_ele(void);
void show_ele();

/*main function*/
void main()
{
int ele,choice,j;
while(1)
{
clrscr();
printf("\n\n****IMPLEMENTATION OF QUEUE USING POINTERS****\n");
printf("==============================================");
printf("\n\t\t MENU\n");
printf("==============================================");
printf("\n\t[1] To insert an element");
printf("\n\t[2] To remove an element");
printf("\n\t[3] To display all the elements");
printf("\n\t[4] Exit");
printf("\n\n\tEnter your choice:");
scanf("%d", &choice);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 60

switch(choice)
{
case 1:
{
printf("\n\tElement to be inserted:");
scanf("%d",&ele);
add_ele(ele);
getch();
break;
}

case 2:
{
if(!e_que())
{
j=rem_ele();
printf("\n\t%d is removed from the queue",j);
getch();
}
else
{
printf("\n\tQueue is Empty.");
getch();
}
break;
}

case 3:
show_ele();
getch();
break;

case 4:
exit(1);
break;

default:
printf("\n\tInvalid choice.");
getch();
break;
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 61
}

}
}

/* Function to check if the queue is empty*/


int e_que(void)
{
if(f_ptr==NULL)
return true;
return false;
}

/* Function to add an element to the queue*/


void add_ele(int ele)
{
struct q_point *queue = (struct q_point*)malloc(sizeof(struct q_point));
queue->ele = ele;
queue->n = NULL;
if(f_ptr==NULL)
f_ptr = queue;
else
{
struct q_point* ptr;
ptr = f_ptr;
for(ptr=f_ptr ;ptr->n!=NULL; ptr=ptr->n);
ptr->n = queue;
}
}

/* Function to remove an element from the queue*/


int rem_ele()
{
struct q_point* queue=NULL;
if(e_que()==false)
{
int j = f_ptr->ele;
queue=f_ptr;
f_ptr = f_ptr->n;
free (queue);
return j;
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 62
}
else
{
printf("\n\tQueue is empty.");
return -9999;
}
}

/* Function to display the queue*/


void show_ele()
{
struct q_point *ptr=NULL;
ptr=f_ptr;
if(e_que())
{
printf("\n\tQUEUE is Empty.");
return;
}
else
{
printf("\n\tElements present in Queue are:\n\t");
while(ptr!=NULL)
{
printf("%d\t",ptr->ele);
ptr=ptr->n;
}
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 63
27. Write a C program that uses Stack operations to perform the
following:
i) Converting infix expression into postfix expression
ii) Evaluating the postfix expression

#include<stdio.h>
#include<conio.h>

int st[100];
int st_top=-1;

int cal(char post[]);


void in_post(char in[]);
void push_item(int it);
int pop_item();
int st_ISP(char t);
int st_ICP(char t);

/*main function*/
void main()
{
char in[100],post[100];
clrscr();
printf("\n\tEnter the Infix Expression: ");
gets(in);
in_post(in);
getch();
}
/*end main*/

void push_item(int it)


{
if(st_top==99)
{
printf("\n\n\t*STACK is Full*");
getch();
exit(1);
}
st[++st_top]=it;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 64

int pop_item()
{
int it;
if(st_top==-1)
{
getch();
}
return(st[st_top--]);
}

/*Function for converting an infix expression to a postfix expression. */


void in_post(char in[])
{
int x=0,y=0,z,result=0;
char a,c, post[100];
char t;
push_item('\0');
t=in[x];
while(t!='\0')
{
if(isalnum(t))
/*For checking whether the value in t is an alphabet or number. */
{
post[y]=t;
y++;
}
else if(t=='(')
{
push_item('(');
}
else if(t==')')
{
while(st[st_top]!='(')
{
c=pop_item();
post[y]=c;
y++;
}
c=pop_item();
}
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 65
else
{
while(st_ISP(st[st_top])>=st_ICP(t))
{
c=pop_item();
post[y]=c;
y++;
}
push_item(t);
}
x++;
t=in[x];
}

while(st_top!=-1)
{
c=pop_item();
post[y]=c;
y++;
}
printf("\n\tThe Postfix Expression is:");

for(z=0;z<y;z++)
printf("%c",post[z]);
printf("\n\nDo you want to evaluate the Result of Postfix Expression?(Y/N):");
scanf("%c",&a);
if(a=='y' || a=='Y')
{
result=cal(post);
printf("\n\n\tResult is: %d\n",result);
getch();
}
else if(a=='n' || a=='N')
{
exit(0);
}
}

/*Determining priority of inside elements*/


int st_ISP(char t)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 66
switch(t)
{
case '(':return (10);
case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '\0':return (0);
default: printf("Expression is invalid.");
break;
}
return 0;
}

/*Determining priority of approaching elements*/


int st_ICP(char t)
{
switch(t)
{

case '(':return (10);


case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '\0':return (0);
default: printf("Expression is invalid.");
break;
}
return 0;
}

/*Evaluating the result of postfix expression*/


int cal(char post[])
{
int m,n,x,y,j=0,len;
len=strlen(post);
while(j<len)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 67
if(isdigit(post[j]))
{
x=post[j]-'0';
push_item(x);
}
else
{
m=pop_item();
n=pop_item();

switch(post[j])
{
case '+':x=n+m;
break;
case '-':x=n-m;
break;
case '*':x=n*m;
break;
case '/':x=n/m;
break;
}
push_item(x);
}
j++;
}
if(st_top>0)
{
printf("Number of Operands are more than Operators.");
exit(0);
}
else
{
y=pop_item();
return (y);
}
return 0;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 68
28. Write a C program that uses functions to perform the following:
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, inorder and
postorder.
#include<stdio.h>
#include <stdlib.h>
#include<conio.h>

struct treenode
{
int ele;
struct treenode *l_child, *r_child;
};

struct treenode *insert_node(struct treenode *t,int a);


void TraverseInorder(struct treenode *t);
void TraversePreorder(struct treenode *t);
void TraversePostorder(struct treenode *t);

/*main function*/
void main()
{
struct treenode *root_node = NULL;
int num,value;
int choice;

clrscr();

printf("----------------------------------------------------\n");
printf("\t\t\tMENU\n");
printf("-----------------------------------------------------\n");
printf("[1] Create a Binary Tree and Use Inorder Traversal\n");
printf("[2] Create a Binary Tree and Use Preorder Traversal\n");
printf("[3] Create a Binary Tree and Use Postorder Traversal\n");
printf("-----------------------------------------------------\n");
printf("Enter your choice:");
scanf("%d",&choice);

if(choice>0 & choice<=3)


{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 69
printf("\nEnter the number of nodes:");
scanf("%d",&num);

while(num-- > 0)
{
printf("\n\nEnter the data value:");
scanf("%d",&value);
root_node = insert_node(root_node,value);
}

switch(choice)
{
case 1:
printf("\n\nBinary tree using Inorder Traversal : ");
TraverseInorder(root_node);
getch();
break;

case 2:
printf("\n\nBinary tree using Preorder Traversal : ");
TraversePreorder(root_node);
getch();
break;

case 3:
printf("\n\nBinary tree using Postorder Traversal : ");
TraversePostorder(root_node);
getch();
break;

default:
printf("Invalid Choice");
break;
}
}
}
/*end main*/

/* Function to create a Binary Tree of integers data */


struct treenode *insert_node(struct treenode *t,int a)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 70
struct treenode *temp_node1,*temp_node2;
if(t == NULL)
{
t = (struct treenode *) malloc(sizeof(struct treenode));
if(t == NULL)
{
printf("Value cannot be allocated.\n");
exit(0);
}
t->ele = a;
t->l_child=t->r_child=NULL;
}
else
{
temp_node1 = t;

while(temp_node1 != NULL)
{
temp_node2 = temp_node1;
if( temp_node1 ->ele > a)
temp_node1 = temp_node1->l_child;
else
temp_node1 = temp_node1->r_child;
}
if( temp_node2->ele > a)
{
temp_node2->l_child = (struct treenode*)malloc(sizeof(struct treenode));
temp_node2 = temp_node2->l_child;
if(temp_node2 == NULL)
{
printf("Value cannot be allocated.\n");
exit(0);
}
temp_node2->ele = a;
temp_node2->l_child=temp_node2->r_child = NULL;
}
else
{
temp_node2->r_child = (struct treenode*)malloc(sizeof(struct treenode));

temp_node2 = temp_node2->r_child;
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 71
if(temp_node2 == NULL)
{
printf("Value cannot be allocated.\n");
exit(0);
}
temp_node2->ele = a;
temp_node2->l_child=temp_node2->r_child = NULL;
}
}
return(t);
}

/* Function for Traversing the binary tree in inorder. */


void TraverseInorder(struct treenode *t)
{
if(t != NULL)
{
TraverseInorder(t->l_child);
printf("%d\t",t->ele);
in_order(t->r_child);
}
}

/* Function for Traversing the binary tree in preorder. */


void TraversePreorder(struct treenode *t)
{
if(t != NULL)
{
printf("%d\t",t->ele);
TraversePreorder(t->l_child);
TraversePreorder(t->r_child);
}
}

/* Function for Traversing the binary tree in postorder. */


void TraversePostorder(struct treenode *t)
{
if(t != NULL)
{
TraversePostorder(t->l_child);
TraversePostorder(t->r_child);
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 72
printf("%d\t",t->ele);
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 73
29. Write C programs that use both recursive and non recursive
functions to perform the following searching operations for a Key
value in a given list of integers :
i) Linear search ii) Binary search
i) Linear search
#include <stdio.h>
#define MAX_LEN 10

void l_search_recursive(int l[],int num,int ele);


void l_search(int l[],int num,int ele);
void read_list(int l[],int num);
void print_list(int l[],int num);

void main()
{
int l[MAX_LEN], num, ele;
int ch;

clrscr();

printf("======================================================");
printf("\n\t\t\tMENU");
printf("\n=====================================================");
printf("\n[1] Linary Search using Recursion method");
printf("\n[2] Linary Search using Non-Recursion method");
printf("\n\nEnter your Choice:");
scanf("%d",&ch);

if(ch<=2 & ch>0)


{
printf("Enter the number of elements :");
scanf("%d",&num);
read_list(l,num);
printf("\nElements present in the list are:\n\n");
print_list(l,num);
printf("\n\nElement you want to search:\n\n");
scanf("%d",&ele);

switch(ch)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 74
case 1:printf("\n**Recursion method**\n");
l_search_recursive(l,num,ele);
getch();
break;

case 2:printf("\n**Non-Recursion method**\n");


l_search_nonrecursive(l,num,ele);
getch();
break;
}
}
getch();
}
/*end main*/

/* Non-Recursive method*/
void l_search_nonrecursive(int l[],int num,int ele)
{
int j, f=0;
for(j=0;j<num;j++)
if( l[j] == ele)
{
printf("\nThe element %d is present at position %d in list\n",ele,j);
f=1;
break;
}
if(f==0)
printf("\nThe element is %d is not present in the list\n",ele);
}

/* Recursive method*/
void l_search_recursive(int l[],int num,int ele)
{
int f = 0;

if( l[num] == ele)


{
printf("\nThe element %d is present at position %d in list\n",ele,num);
f=1;
}
else
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 75
{
if((num==0) && (f==0))
{
printf("The element %d is not found.",ele);
}
else
{
l_search(l,num-1,ele);
}
}
getch();
}

void read_list(int l[],int num)


{
int j;
printf("\nEnter the elements:\n");
for(j=0;j<num;j++)
scanf("%d",&l[j]);
}

void print_list(int l[],int num)


{
int j;
for(j=0;j<num;j++)
printf("%d\t",l[j]);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 76
ii) Binary search

#include <stdio.h>
#define MAX_LEN 10

/* Non-Recursive function*/
void b_search_nonrecursive(int l[],int num,int ele)
{
int l1,i,j, flag = 0;
l1 = 0;
i = num-1;
while(l1 <= i)
{
j = (l1+i)/2;
if( l[j] == ele)
{
printf("\nThe element %d is present at position %d in list\n",ele,j);
flag =1;
break;
}
else
if(l[j] < ele)
l1 = j+1;
else
i = j-1;
}
if( flag == 0)
printf("\nThe element %d is not present in the list\n",ele);
}

/* Recursive function*/
int b_search_recursive(int l[],int arrayStart,int arrayEnd,int a)
{
int m,pos;
if (arrayStart<=arrayEnd)
{
m=(arrayStart+arrayEnd)/2;
if (l[m]==a)
return m;
else if (a<l[m])

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 77
return b_search_recursive(l,arrayStart,m-1,a);
else
return b_search_recursive(l,m+1,arrayEnd,a);
}
return -1;
}

void read_list(int l[],int n)


{
int i;
printf("\nEnter the elements:\n");
for(i=0;i<n;i++)
scanf("%d",&l[i]);
}

void print_list(int l[],int n)


{
int i;
for(i=0;i<n;i++)
printf("%d\t",l[i]);
}

/*main function*/
void main()
{
int l[MAX_LEN], num, ele,f,l1,a;
int ch,pos;

clrscr();

printf("======================================================");
printf("\n\t\t\tMENU");
printf("\n=====================================================");
printf("\n[1] Binary Search using Recursion method");
printf("\n[2] Binary Search using Non-Recursion method");
printf("\n\nEnter your Choice:");
scanf("%d",&ch);

if(ch<=2 & ch>0)


{
printf("\nEnter the number of elements : ");
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 78
scanf("%d",&num);
read_list(l,num);
printf("\nElements present in the list are:\n\n");
print_list(l,num);
printf("\n\nEnter the element you want to search:\n\n");
scanf("%d",&ele);

switch(ch)
{
case 1:printf("\nRecursive method:\n");
pos=b_search_recursive(l,0,num,ele);
if(pos==-1)
{
printf("Element is not found");
}
else
{
printf("Element is found at %d position",pos);
}
getch();
break;

case 2:printf("\nNon-Recursive method:\n");


b_search_nonrecursive(l,num,ele);
getch();
break;
}
}
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 79
30. Write C programs that implement the following sorting methods
to sort a given list of integers in ascending order:
i) Bubble sort ii) Quick sort
i) Bubble sort

#include <stdio.h>
#define MAX 10

void swapList(int *m,int *n)


{
int temp;
temp = *m;
*m = *n;
*n = temp;
}

// Function for Bubble Sort


void bub_sort(int list[], int n)
{
int i,j;
for(i=0;i<(n-1);i++)
for(j=0;j<(n-(i+1));j++)
if(list[j] > list[j+1])
swapList(&list[j],&list[j+1]);
}

void readlist(int list[],int n)


{
int j;
printf("\nEnter the elements: \n");
for(j=0;j<n;j++)
scanf("%d",&list[j]);
}

// Showing the contents of the list


void printlist(int list[],int n)
{
int j;
for(j=0;j<n;j++)
printf("%d\t",list[j]);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 80
}

void main()
{
int list[MAX], num;
clrscr();
printf("\n\n\n***** Enter the number of elements [Maximum 10] *****\n");
scanf("%d",&num);
readlist(list,num);
printf("\n\nElements in the list before sorting are:\n");
printlist(list,num);
bub_sort(list,num);
printf("\n\nElements in the list after sorting are:\n");
printlist(list,num);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 81
ii) Quick sort

#include <stdio.h>
#define MAX 10

void swap(int *m,int *n)


{
int temp;
temp = *m;
*m = *n;
*n = temp;
}
int get_key_position(int x,int y )
{
return((x+y) /2);
}

// Function for Quick Sort


void quicksort(int list[],int m,int n)
{
int key,i,j,k;
if( m < n)
{
k = get_key_position(m,n);
swap(&list[m],&list[k]);
key = list[m];
i = m+1;
j = n;
while(i <= j)
{
while((i <= n) && (list[i] <= key))
i++;
while((j >= m) && (list[j] > key))
j--;
if( i < j)
swap(&list[i],&list[j]);
}
swap(&list[m],&list[j]);
quicksort(list,m,j-1);
quicksort(list,j+1,n);

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 82
}
}

// Function to read the data


void read_data(int list[],int n)
{
int j;
printf("\n\nEnter the elements:\n");
for(j=0;j<n;j++)
scanf("%d",&list[j]);
}

// Function to print the data


void print_data(int list[],int n)
{
int j;
for(j=0;j<n;j++)
printf("%d\t",list[j]);
}

void main()
{
int list[MAX], num;
clrscr();
printf("\n***** Enter the number of elements Maximum [10] *****\n");
scanf("%d",&num);
read_data(list,num);
printf("\n\nElements in the list before sorting are:\n");
print_data(list,num);
quicksort(list,0,num-1);
printf("\n\nElements in the list after sorting are:\n");
print_data(list,num);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 83
31. Write C programs that implement the following sorting methods
to sort a given list of integers in ascending order:
i) Insertion sort ii) Merge sort
i) Insertion sort

#include<stdio.h>
#include<conio.h>

void inst_sort(int []);

void main()
{
int num[5],count;
clrscr();
printf("\nEnter the Five Elements to sort:\n");

for (count=0;count<5;count++)
scanf("%d",&num[count]);
inst_sort(num);

printf("\n\nElements after sorting: \n");


for(count=0;count<5;count++)
printf("%d\n",num[count]);
getch();
}

// Function for Insertion Sorting


void inst_sort(int num[])
{
int i,j,k;
for(j=1;j<5;j++)
{
k=num[j];
for(i=j-1;i>=0 && k<num[i];i--)
num[i+1]=num[i];
num[i+1]=k;
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 84
ii) Merge sort

#include <stdio.h>
#include <stdlib.h>

#define MAX_ARY 10

void merge_sort(int x[], int end, int start);

int main(void) {
int ary[MAX_ARY];
int j = 0;

printf("\n\nEnter the elements to be sorted: \n");


for(j=0;j<MAX_ARY;j++)
scanf("%d",&ary[j]);

/* array before mergesort */


printf("Before :");
for(j = 0; j < MAX_ARY; j++)
printf(" %d", ary[j]);

printf("\n");

merge_sort(ary, 0, MAX_ARY - 1);

/* array after mergesort */


printf("After Merge Sort :");
for(j = 0; j < MAX_ARY; j++)
printf(" %d", ary[j]);

printf("\n");
getch();
}

/* Method to implement Merge Sort*/


void merge_sort(int x[], int end, int start) {
int j = 0;
const int size = start - end + 1;
int mid = 0;

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 85
int mrg1 = 0;
int mrg2 = 0;
int executing[MAX_ARY];

if(end == start)
return;

mid = (end + start) / 2;

merge_sort(x, end, mid);


merge_sort(x, mid + 1, start);

for(j = 0; j < size; j++)


executing[j] = x[end + j];

mrg1 = 0;
mrg2 = mid - end + 1;

for(j = 0; j < size; j++) {


if(mrg2 <= start - end)
if(mrg1 <= mid - end)
if(executing[mrg1] > executing[mrg2])
x[j + end] = executing[mrg2++];
else
x[j + end] = executing[mrg1++];
else
x[j + end] = executing[mrg2++];
else
x[j + end] = executing[mrg1++];
}
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 86
32. Write C programs to implement the Lagrange interpolation and
Newton- Gregory forward interpolation.

Lagrange interpolation:

#include<stdio.h>
#include<conio.h>
#define MaxN 90

void main()
{
float arr_x[MaxN+1], arr_y[MaxN+1], numerator, denominator, x, y=0;
int i, j, n;
clrscr();
printf("Enter the value of n: \n");
scanf("%d", &n);
printf("Enter the values of x and y: \n");
for(i=0; i<=n; i++)
scanf("%f%f", &arr_x[i], &arr_y[i]);
printf("Enter the value of x at which value of y is to be calculated: ");
scanf("%f", &x);
for (i=0; i<=n; i++)
{
numerator=1;
denominator=1;
for (j=0; j<=n; j++)
if(j!=i)
{
numerator *= x-arr_x[j];
denominator *= arr_x[i]-arr_x[j];
}
y+=(numerator/denominator)*arr_y[i];
}
printf("When x=%4.1f y=%7.1f\n",x,y);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 87
Newton- Gregory forward interpolation.:

#include<stdio.h>
#include<conio.h>
#define MaxN 100
#define Order_of_diff 4

void main ()
{
float arr_x[MaxN+1], arr_y[MaxN+1], numerator=1.0, denominator=1.0, x, y, p, h,
diff_table[MaxN+1][Order_of_diff+1];
int i,j,n,k;
clrscr();

printf("Enter the value of n \n");


scanf("%d",&n);
printf("Enter the values of x and y");

for(i=0; i<=n; i++)


scanf("%f%f", &arr_x[i], &arr_y[i]);
printf("Enter the value of x at which value of y is to be calculated");
scanf("%f", &x);
h=arr_x[1]-arr_x[0];

for(i=0; i<=n-1; i++)


diff_table[i][1]=arr_y[i+1]-arr_y[i];/*Creating the difference table and calculating first order
differences*/
for(j=2; j<=Order_of_diff; j++)/*Calculating higher order differences*/
for(i=0; i<=n-j; i++)
diff_table[i][j]=diff_table[i+1][j-1] - diff_table[i][j-1];
i=0;

while(!(arr_x[i]>x)) /* Finding x0 */
i++;
i--;
p=(x-arr_x[i])/h;
y=arr_y[i];

for (k=1; k<=Order_of_diff; k++)


{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 88
numerator *=p-k+1;
denominator *=k;
y +=(numerator/denominator)*diff_table[i][k];
}
printf("When x=%6.1f, y=%6.2f\n",x, y);
getch();
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 89
33. Write C programs to implement the linear regression and
polynomial regression algorithms

#include<stdio.h>
#include<conio.h>
#include<math.h>
#include<string.h>

float mean(float *a, int n);


void deviation(float *a, float mean, int n, float *d, float *S);

void main()
{
float a[20],b[20],dx[20],dy[20];
float sy=0,sx=0,mean_x=0,mean_y=0,sum_xy=0;
float corr_coff=0,reg_coff_xy=0, reg_coff_yx=0;
char type_coff[7];
int n=0,i=0;

clrscr();

printf("Enter the value of n: ");


scanf("%d",&n);
printf("Enter the values of x and y:\n");
for(i=0;i<n;i++)
scanf("%f%f",&a[i],&b[i]);
mean_x=mean(a,n);
mean_y=mean(b,n);
deviation(a,mean_x,n,dx,&sx);
deviation(b,mean_y,n,dy,&sy);

for(i=0;i<n;i++)
sum_xy=sum_xy+dx[i]*dy[i];
corr_coff=sum_xy/(n*sx*sy);
printf("Enter the type of regression coefficient as 'x on y' or 'y on x': ");
fflush(stdin);
gets(type_coff);

if(strcmp(type_coff,"x on y")==1)
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 90
reg_coff_xy=corr_coff*(sx/sy);
printf("\nThe value of linear regression coefficient is %f",reg_coff_xy);
}
else if(strcmp(type_coff,"y on x")==1)
{
reg_coff_yx=corr_coff*(sy/sx);
printf("\nThe value of linear regression coefficient is %f",reg_coff_yx);
}
else
printf("\nEnter the correct type of regression coefficient.");
getch();
}

float mean(float *a, int n)


{
float sum=0, i=0;
for(i=0;i<n;i++)
sum=sum+a[i];
sum=sum/n;
return (sum);
}

void deviation(float *a, float mean, int n, float *d, float *s)
{
float sum=0,t=0;
int i=0;
for(i=0;i<n;i++)
{
d[i]=a[i]-mean;
t=d[i]*d[i];
sum=sum+t;
}
sum=sum/n;
*s=sqrt(sum);
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 91
34. Write C programs to implement Trapezoidal and Simpson
methods.
Trapezoidal:

#include<stdio.h>
#include<conio.h>
#include<math.h>

char postfix[80];
float stack[80];
char stack1[80];
int top=-1,top1=-1;

float eval(char postfix[], float x1);


void infix_postfix(char infix[]);

main()
{
float x0, xn, h, s,e1,e2;
char exp[80], arr[80];
int i,n,l=0;
clrscr();
printf("\nEnter an expression: ");
gets(exp);
puts("Enter x0, xn and number of subintervals");
scanf("%f%f%d", &x0, &xn, &n);
h=(xn-x0)/n;
if(exp[0]=='l'&& exp[1]=='o'&& exp[2]=='g')
{
l=strlen(exp);
for(i=0;i<l-3; i++)
arr[0]=exp[i+3];
arr[i]='\0';
infix_postfix(arr);
e1=eval(postfix,x0);
e2=eval(postfix,xn);
s=log(e1)+log(e2);
for (i=1;i<=n-1;i++)
s+=2*log(eval(postfix,x0+i*h));
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 92
else
{
infix_postfix(exp);
s=eval(postfix,x0)+eval(postfix,xn);
for (i=1;i<=n-1;i++)
s+=2*eval(postfix,x0+i*h);
}
printf("Value of the integral is %6.3f\n",(h/2)*s);
return(0);
}
/*Inserting the operands in a stack. */
void push(float item)
{
if(top==99)
{
printf("\n\tThe stack is full");
getch();
exit(0);
}
else
{
top++;
stack[top]=item;
}
return;
}
/*Removing the operands from a stack. */
float pop()
{
float item;
if(top==-1)
{
printf("\n\tThe stack is empty\n\t");
getch();
}
item=stack[top];
top--;
return (item);
}
void push1(char item)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 93
if(top1==79)
{
printf("\n\tThe stack is full");
getch();
exit(0);
}
else
{
top1++;
stack1[top1]=item;
}
return;
}
/*Removing the operands from a stack. */
char pop1()
{
char item;
if(top1==-1)
{
printf("\n\tThe stack1 is empty\n\t");
getch();
}
item=stack1[top1];
top1--;
return (item);
}
/*Converting an infix expression to a postfix expression. */
void infix_postfix(char infix[])
{
int i=0,j=0,k;
char ch;
char token;
for(i=0;i<79;i++)
postfix[i]=' ';
push1('?');
i=0;
token=infix[i];
while(token!='\0')
{
if(isalnum(token))
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 94
postfix[j]=token;
j++;
}
else if(token=='(')
{
push1('(');
}
else if(token==')')
{
while(stack1[top1]!='(')
{
ch=pop1();
postfix[j]=ch;
j++;
}
ch=pop1();
}
else
{

while(ISPriority(stack1[top1])>=ICP(token))
{
ch=pop1();
/*Assigning the popped element into the postfix array. */
postfix[j]=ch;
j++;
}
push1(token);
}
i++;
token=infix[i];
}
while(top1!=0)
{
ch=pop1();
postfix[j]=ch;
j++;
}
postfix[j]='\0';
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 95
int ISPriority(char token)
{
switch(token)
{
case '(':return (0);
case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '?':return (0);
default: printf("Invalid expression");
break;
}
return 0;
}
/*Determining the priority of elements that are approaching towards the stack. */
int ICP(char token)
{
switch(token)
{
case '(':return (10);
case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '\0':return (0);
default: printf("Invalid expression");
break;
}
return 0;
}
/*Calculating the result of expression, which is converted in postfix notation. */
float eval(char p[], float x1)
{
float t1,t2,k,r;
int i=0,l;
l=strlen(p);
while(i<l)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 96
if(p[i]=='x')
push(x1);
else
if(isdigit(p[i]))
{
k=p[i]-'0';
push(k);
}
else
{
t1=pop();
t2=pop();
switch(p[i])
{
case '+':k=t2+t1;
break;
case '-':k=t2-t1;
break;
case '*':k=t2*t1;
break;
case '/':k=t2/t1;
break;
default: printf("\n\tInvalid expression");
break;
}
push(k);
}
i++;
}
if(top>0)
{
printf("You have entered the operands more than the operators");
exit(0);
}
else
{
r=pop();
return (r);
}
return 0;
}
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 97

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 98
Simpson methods:

#include<stdio.h>
#include<conio.h>
#include<math.h>

char postfix[80];
float stack[80];
char stack1[80];
int top=-1,top1=-1;
float eval(char postfix[], float x1);
void infix_postfix(char infix[]);

main()
{
float x0, xn, h, s,e1,e2, e3;
char exp[80], arr[80];
int i,n,l=0;
clrscr();
printf("\nEnter an expression: ");
gets(exp);
puts("Enter x0, xn and number of sub-intervals: ");
scanf("%f%f%d", &x0, &xn, &n);
h=(xn-x0)/n;
if(exp[0]=='l'&& exp[1]=='o'&& exp[2]=='g')
{
l=strlen(exp);
for(i=0;i<l-3; i++)
arr[0]=exp[i+3];
arr[i]='\0';
infix_postfix(arr);
e1=eval(postfix,x0);
e2=eval(postfix,xn);
e3=4*eval(postfix, x0+h);
s=log(e1)+log(e2)+log(e3);
for (i=3;i<=n-1;i+=2)
s+=4*eval(postfix,x0+i*h)+2*eval(postfix, x0+(i-1)*h);
}
else
{

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 99
infix_postfix(exp);
s=eval(postfix,x0)+eval(postfix,xn)+4*eval(postfix, x0+h);
for (i=3;i<=n-1;i+=2)
s+=4*eval(postfix,x0+i*h)+2*eval(postfix, x0+(i-1)*h);
}
printf("The value of integral is %6.3f\n",(h/3)*s);
return(0);
}
/*Inserting the operands in a stack. */
void push(float item)
{
if(top==99)
{
printf("\n\tThe stack is full");
getch();
exit(0);
}
else
{
top++;
stack[top]=item;
}
return;
}
/*Removing the operands from a stack. */
float pop()
{
float item;
if(top==-1)
{
printf("\n\tThe stack is empty\n\t");
getch();
}
item=stack[top];
top--;
return (item);
}
void push1(char item)
{
if(top1==79)
{
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 100
printf("\n\tThe stack is full");
getch();
exit(0);
}
else
{
top1++;
stack1[top1]=item;
}
return;
}
/*Removing the operands from a stack. */
char pop1()
{
char item;
if(top1==-1)
{
printf("\n\tThe stack1 is empty\n\t");
getch();
}
item=stack1[top1];
top1--;
return (item);
}
/*Converting an infix expression to a postfix expression. */
void infix_postfix(char infix[])
{
int i=0,j=0,k;
char ch;
char token;
for(i=0;i<79;i++)
postfix[i]=' ';
push1('?');
i=0;
token=infix[i];
while(token!='\0')
{
if(isalnum(token))
{
postfix[j]=token;
j++;
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 101
}
else if(token=='(')
{
push1('(');
}
else if(token==')')
{
while(stack1[top1]!='(')
{
ch=pop1();
postfix[j]=ch;
j++;
}
ch=pop1();
}
else
{
while(ISPriority(stack1[top1])>=ICP(token))
{
ch=pop1();
postfix[j]=ch;
j++;
}
push1(token);
}
i++;
token=infix[i];
}
while(top1!=0)
{
ch=pop1();
postfix[j]=ch;
j++;
}
postfix[j]='\0';
}

/*Determining the priority of elements that are placed inside the stack. */
int ISPriority(char token)
{
switch(token)
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 102
{
case '(':return (0);
case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '?':return (0);
default: printf("Invalid expression");
}
return 0;
}

/*Determining the priority of elements that are approaching towards the stack. */
int ICP(char token)
{
switch(token)
{
case '(':return (10);
case ')':return (9);
case '+':return (7);
case '-':return (7);
case '*':return (8);
case '/':return (8);
case '\0':return (0);
default: printf("Invalid expression");
}
return 0;
}
/*Calculating the result of expression, which is converted in postfix notation. */
float eval(char p[], float x1)
{
float t1,t2,k,r;
int i=0,l;
l=strlen(p);
while(i<l)
{
if(p[i]=='x')
push(x1);
else
if(isdigit(p[i]))
SARADA INSTITUTE OF TECHNOLOGY & SCIENCE
CP LAB 103
{
k=p[i]-'0';
push(k);
}
else
{
t1=pop();
t2=pop();
switch(p[i])
{
case '+':k=t2+t1;
break;
case '-':k=t2-t1;
break;
case '*':k=t2*t1;
break;
case '/':k=t2/t1;
break;
default: printf("\n\tInvalid expression");
}
push(k);
}
i++;
}
if(top>0)
{
printf("You have entered the operands more than the operators");
exit(0);
}
else
{
r=pop();
return (r);
}
return 0;
}

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE


CP LAB 104

REFERENCES:

1. C programming and Data Structures, P. Padmanabham, Third Edition, BS


Publications
2. Data Structures: A pseudo code approach with C, second edition R.F.
Gilberg and B.A. Forouzan
3. Programming in C, P.Dey & M. Ghosh, Oxford Univ.Press.
4. C and Data Structures, E Balaguruswamy, TMH publications.

SARADA INSTITUTE OF TECHNOLOGY & SCIENCE

Вам также может понравиться