0 оценок0% нашли этот документ полезным (0 голосов)
26 просмотров1 страница
Advanced Motion Controls has released the μZ Servo Drives, the smallest off-the-shelf servo drives weighing only 8.5 grams. The μZ drives are 1.5 inches on a side and can output 10A peak and 5A continuous power for a wide range of applications. The μZ drives do not require a heatsink and interface with digital controllers using analog or PWM commands.
Advanced Motion Controls has released the μZ Servo Drives, the smallest off-the-shelf servo drives weighing only 8.5 grams. The μZ drives are 1.5 inches on a side and can output 10A peak and 5A continuous power for a wide range of applications. The μZ drives do not require a heatsink and interface with digital controllers using analog or PWM commands.
Advanced Motion Controls has released the μZ Servo Drives, the smallest off-the-shelf servo drives weighing only 8.5 grams. The μZ drives are 1.5 inches on a side and can output 10A peak and 5A continuous power for a wide range of applications. The μZ drives do not require a heatsink and interface with digital controllers using analog or PWM commands.
Camarillo, CA- Weighing only 8.5 grams and capable of outputting 10A peak and 5A continuous Zs are the smallest off-the-shelf servo drives from ADVANCED Motion Controls. Pronounced Micro-Z these plug- in drives are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging. These full featured drives operate with brushless and brushed servo motors and are available for immediate shipment. Z Servo Drives are Current Mode drives that measure 1.5 on a side and output 10A peak and 5A continuous at up to 36VDC. Designed without the need for a heatsink, the Zs are true featherweights with a high power to weight ratio. The Zs are fully protected against over-voltage, under- voltage, over-current, over-heating, and short-circuits. Depending on the model, the drives interface with digital controllers that have analog 10 V or PWM/Direction commands. These servo drives require only a single unregulated isolated DC power supply, and are fully RoHS (Reduction of Hazardous Substances) compliant. Click on the link below for more information on the new servo amplifiers from AMC- https://www.servo2go.com/search.php?search=10A4&D=PROD For more information, please contact: