0 оценок0% нашли этот документ полезным (0 голосов)
25 просмотров1 страница
This document provides instructions for building a simple mechanical linkage using arbitrary lengths for the arms and 1/2" x 1/2" bar stock. All holes are drilled at 1/4" and pins are slightly oversized at 1/4" for press fitting into the arms. Dimensions do not need to be precise, as the pins could be longer but not shorter to avoid interference and thickness is limited to avoid bending, but diameter does not matter.
This document provides instructions for building a simple mechanical linkage using arbitrary lengths for the arms and 1/2" x 1/2" bar stock. All holes are drilled at 1/4" and pins are slightly oversized at 1/4" for press fitting into the arms. Dimensions do not need to be precise, as the pins could be longer but not shorter to avoid interference and thickness is limited to avoid bending, but diameter does not matter.
This document provides instructions for building a simple mechanical linkage using arbitrary lengths for the arms and 1/2" x 1/2" bar stock. All holes are drilled at 1/4" and pins are slightly oversized at 1/4" for press fitting into the arms. Dimensions do not need to be precise, as the pins could be longer but not shorter to avoid interference and thickness is limited to avoid bending, but diameter does not matter.
will work. Also, the 1/2" x 1/2" bar stock is just what I had on hand. You could use anything you want. All of the holes are drilled 1/4". A 1/4" bolt at the pivot, and the pins are barely 1/4" oversized to press into the arms. None of the holes were reamed.
.25
.95 .50
.16
.40
.25
The pins could be longer, but shorter would cause interference.
The pin diameter doesn't really matter, but I made them as thick as I could without there being interference. Any thinner, and you'll likely bend them (I bent a pair and had to remake them). Don't be worried about any of these dimensions, nothing has to be real precise.
.26 .94 .16
.25
.50 .50
8.00
1.70
.50 This shape is not ground to a specific dimension but is just enough for clearance.