= 2.54 -
- 256 He
z BEARING REACTIONS WITH A SINGLE ANCHORING OF BUILDING 290 HC
ZA
zh
re) ST
ie) 7 2
fe
7 p—a —~
. Fs Har HE Val
= Anchor point
If the anchoring cannot be
close to a ring web, the
corner profiles mst be
stiffened with suppport : 2
beams.
2 Z|
é Hea} Vaz
o
Hq can act through a 360° circle.
Mp = from foundation loading2.55 ~
TIE-IN ONTO THE BUILDING 256 HC
290 HC
I Nutber of tower sections below first tie~in:
x max. n=7-9
4 ‘Requirement: The tie-in forces can be borne by
2 the building.
min. n = base tower + 3
b
Number of tower sections above tie-in:
a) Climbing device pinned onto fixed pivot
max. n= 8
atnx
h=
b) Climbing device lowered to the tie-in
max. n= 9
Number of tower sections between 2 tie-in points:
For the’ load casés "in opération" and "out of operation" the following formulas
apply:
Veotal =Vitn-G+c!
Mp = Slewing moment from foundation loading in ktm
V = Vertical force from foundation loading in kNv
G = Weight of 1 tar sectin = b' = 414m Gs = 2.260 kg
G! = Weight of base tower section a'=8,85m G'_= 4 380 kg
H = Horizontal force fron foundation loading in kv
@ = Wind/storm load on the tower in kN/m
0,38 KN/m "in operation"
1,67 KN/m “out of operation" below 100 m hook height
1,97 KN/m "out of operation" above 100 m hook height: |
be = Height from foundation to the tie-in point in m
M = Overturning moment from foundation loading in kNm
o
Values M, H, V and Mp should be taken fron the "Foundation loading" table. |
Note that the foundation Ioading table includes the base tower section. Base
‘tower section = 2 tower sections. |- 2.56 =
GUY RODS
256 HC
290 HC
ay = 1770
by = 2720
185
T+ Ha sin (a + 7)
~ mm - sing - M+ —m sin (% - 8)
Jee mts
Bnax results in case of opposite direction of Mp
n=by- cy
+
ctg/8 + ctg
a 4
BEAL” Ol cog e+ eta