Академический Документы
Профессиональный Документы
Культура Документы
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command:
Command:
Select objects:
4 loops extracted.
4 Regions created.
Command:
Command:
Command: _presspull
Select object or bounded area:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <2dwireframe>: _C
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top
Command:
Command:
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _vscurrent
Enter an option
[2dwireframe/Wireframe/Hidden/Realistic/Conceptual/Shaded/shaded with
Edges/shades of Gray/SKetchy/X-ray/Other] <Wireframe>: _C
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: 3
No fillet to be computed.
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 5.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <5.0000>: 3
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>: 3
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <3.0000>: 3
No fillet to be computed.
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>: Specify second point:
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>: Specify second point:
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>:
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel*
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>: Specify second point:
No fillet to be computed.
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <3.0000>: Specify second point:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <3.0000>: 2
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 2.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <2.0000>: 3
Command:
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 3.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <3.0000>: 2
No fillet to be computed.
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 2.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Enter fillet radius or [Expression] <2.0000>:
Command:
FILLET
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _bottom
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso