0 оценок0% нашли этот документ полезным (0 голосов)
5 просмотров3 страницы
The document describes the procedure to upgrade the binos of an ESB 26 card, which involves:
1. Installing TFTPD server software on a laptop and copying the upgrade file ESBB26GX.BIN to the server.
2. Connecting the ESB 26 card to the laptop via serial port and verifying the current software version.
3. Configuring network settings on the ESB 26 card and laptop to upgrade via LAN connection.
4. Logging into the ESB 26 card via LAN, backing up configuration, and copying the upgrade file to reload the card with new software.
The document describes the procedure to upgrade the binos of an ESB 26 card, which involves:
1. Installing TFTPD server software on a laptop and copying the upgrade file ESBB26GX.BIN to the server.
2. Connecting the ESB 26 card to the laptop via serial port and verifying the current software version.
3. Configuring network settings on the ESB 26 card and laptop to upgrade via LAN connection.
4. Logging into the ESB 26 card via LAN, backing up configuration, and copying the upgrade file to reload the card with new software.
The document describes the procedure to upgrade the binos of an ESB 26 card, which involves:
1. Installing TFTPD server software on a laptop and copying the upgrade file ESBB26GX.BIN to the server.
2. Connecting the ESB 26 card to the laptop via serial port and verifying the current software version.
3. Configuring network settings on the ESB 26 card and laptop to upgrade via LAN connection.
4. Logging into the ESB 26 card via LAN, backing up configuration, and copying the upgrade file to reload the card with new software.
C:\Program Files Copy file to ESBB26GX.BIN file to TFTPD ser and TFTPD.exe folder in program Files Install TFTPD server in laptop Connect serial port of ESB 26 card in LANU 0 or 1 to comport of laptop Settings in TANG for serial port login: Type : Direct Port : COM1 Speed: 9600 Parity : 8None1 Flow: None login through serial port and run the following commands Password: nokia ESB26>en ESB26#sh ver ( For verifying sw version) Ex: Switch model : NOKIA ESB26 SW version : 4.5.0 created Dec 20 2006 - 12:19:11 Primary version : 4.5.0 Secondary version : 4.5.0 Java version : Java image not loaded Loader version : 1.1.7 created Oct 28 2004 - 13:38:38 System Loader version : 4.5.0 created Dec 20 2006 - 12:16:44 Up time : 0 days, 0 hours, 11 min, 46 sec.
ESB26#sh ip ( For verifying IP)
Ex: IP-ADDR : 192.168.0.5 NET-MASK : 255.255.255.128 DEFAULT GATEWAY : 192.168.0.10 Config t no ip address dhcp no ip route 0.0.0.0/0 10.0.101.1 (give the Gateway IP of the ESB) ip address 173.32.173.32 255.255.0.0 ip route 0.0.0.0/0 173.32.173.1 exit sh ip Set the LAN IP as given below for the laptop IP-ADDR : 173.32.173.31 NET-MASK : 255.255.0.0 DEFAULT GATEWAY : 173.32.173.30 Settings in TANG for LAN port login: Set the IP address of ESB 26 in TANG ( Address: 173.32.173.32) login through LAN port and run the following commands Password:nokia ESB26>en copy running-config upload-to 173.32.173.31 L1E3.txt (give the LANU Index and ESB index as file name for each ESB card) copy sysloader 173.32.173.31 ESBB26GX.BIN
copy application leave-primary-sw
173.32.173.31 ESBB26GX.BIN show boot-mode config t boot-mode auto exit show boot-mode reload to-defaults y Open TFTPD exe or SE file before Commands Execution, Check the path is C:\Program Files\ TFTPD folders ( Any one of 2 folders) Backup files will be saved in Programfiles\TFTPD Server Files: ESBB26GX.BIN