0 оценок0% нашли этот документ полезным (0 голосов)
16 просмотров1 страница
aim to design several model Pelton turbines where all measurements, simulations, the design strategy, design software in addition to the physical model
aim to design several model Pelton turbines where all measurements, simulations, the design strategy, design software in addition to the physical model
aim to design several model Pelton turbines where all measurements, simulations, the design strategy, design software in addition to the physical model
Waterpower Laboratory, Department of Energy and Process Engineering, Norwegian U niversity of Science and Technology (NTNU). E-mail: bjorn.w.solemslie@ntnu.no Abstract. The designs of hydraulic turbines are usually close kept corporation s ecrets. Therefore, the possibility of innovation and co-operation between differ ent academic institutions regarding a specific turbine geometry is difficult. A Ph.D.-project at the Waterpower Laboratory, NTNU, aim to design several model Pe lton turbines where all measurements, simulations, the design strategy, design s oftware in addition to the physical model will be available to the public. In th e following paper a short description of the methods and the test rig that are t o be utilized in the project are described. The design will be based on empirica l data and NURBS will be used as the descriptive method for the turbine geometry . In addition CFX and SPH simulations will be included in the design process. Ea ch turbine designed and produced in connection to this project will be based on the experience and knowledge gained from the previous designs. The first design will be based on the philosophy to keep a near constant relative velocity throug h the bucket.