Академический Документы
Профессиональный Документы
Культура Документы
By,
T.N.DEIVAVINODHAN,
V.A.G.GOPINATH,
P.PARTHA SARATHI,
A.SUGANYA.
GUIDED BY,
P.MAHADEVAN.
ASSISTANT PROFESSOR.
STAAD Pro:
Structural Analysis And Design Program
Analysis of the structure through staad.
Aquire the various design values for the structure
Requires less duration to analysis and design.
More accuracy based on the values Feed to the
computer.
Method of design:
Limit state method of design
The values of loadings were calculated as per
practical considerations for a unit area of
structure and it is multiplied over the entire
structure.
The design is carried out satisfying the codal
requirements without fail over the entire
Codes used:
I. IS 875 (part 1) 1987 CODE OF PRACTICE FOR DEAD LOADS.
II. IS 875 (part 2) 1987 CODE OF PRACTICE FOR IMPOSED
LOADS.
III. IS 875 (part 3) 1987 CODE OF PRACTICE FOR WIND LOADS.
IV. IS 456: 2000 PLAIN & R.C.C CODE OF PRACTICE.
V. IS 800: 2007 STEEL CODE OF PRACTICE.
Dead load
self weight of the structure + specific unit weight of the materials
used in structure
Live load
weight of the spectators + other equipments,
machineries+etc.,
Wind load
Dynamic load acting over the structure.
Span :
45*9*6m
SBC of soil:
200kN/m
(assumed)
Dead load
Wind load
purlin
Wall
Live load
Slab design:
Slab load
Slab load
Isolated
footing
Footing design:
THANK YOU..