2 Procedures 1: Initial Values Of Variables To Be Used:
Controlled hot water temperature = 60C Hot water flow rate QH = 6.0 L/min Cold water flow rate QC= 1.5,3 and 4.5 L/min (then increase accordingly for turbulent flow) 4.3 Procedures 2: Step by Step Process: 1. When the hot water temperature indicator reached 60C, set the outlet hot water flow rate to 6.0 L/min and the cold water flow rate to 1.5 L/min. 2. Let the water run a few moments until the value of TT1 to TT6 stabilized. 3. Record the hot and cold water temperatures at inlet, mid-point and outlet once conditions have stabilized. 4. Directly plot the values of TT1 TT6 (x-axis) versus C (y-axis). 5. Your graph should be similar to the graph below. 6. Repeat step 15 for turbulent cold water flow rate for the value of 3 L/min and 4.5 L/min.