0 оценок0% нашли этот документ полезным (0 голосов)
43 просмотров2 страницы
The gland steam supply valve supplies seal steam to shaft seals during start-up and low load to prevent air from entering the vacuum of the shaft seals. It also maintains a constant pressure in the header. The valve is operated by a piston in an electro hydraulic actuator which moves the valve stem and integrated pilot valve to regulate steam flow. The valve stem and cone are guided in a bushing, and any leakage steam in the upper bushing is directed back to the header.
The gland steam supply valve supplies seal steam to shaft seals during start-up and low load to prevent air from entering the vacuum of the shaft seals. It also maintains a constant pressure in the header. The valve is operated by a piston in an electro hydraulic actuator which moves the valve stem and integrated pilot valve to regulate steam flow. The valve stem and cone are guided in a bushing, and any leakage steam in the upper bushing is directed back to the header.
The gland steam supply valve supplies seal steam to shaft seals during start-up and low load to prevent air from entering the vacuum of the shaft seals. It also maintains a constant pressure in the header. The valve is operated by a piston in an electro hydraulic actuator which moves the valve stem and integrated pilot valve to regulate steam flow. The valve stem and cone are guided in a bushing, and any leakage steam in the upper bushing is directed back to the header.
One function of the gland steam supply valve, which is
situated in the grand steam pipe of the seal steam system, is to supply the shaft seals with seal steam during start-up and in the lower load range. A further function is to keep the set pressure in the header constant in order to prevent air penetrating the vacuum of the shaft seals.
The gland steam supply valve is operated by the piston
of the electro hydraulic actuator (1), which is moved in the open and closed direction by the pressure of the control oil. The piston rod (2) is connected to the valve stem (7) via the coupling (4), the threaded cap (5) and cover (6). The steam flow is regulated by the pilot valve, which is integral with the valve stem. The position of the valve is shown on the scale (3). The valve stem (7) and valve cone (13) are guided in the bushing (11). Any leakage steam arising in the upper part of the bushing (11) is conducted to the header.
1 Electro hydraulic actuator
2 Piston rod 2 Scale 3 Coupling 4 Threaded cap 5 Cover 6 Valve stem with pilot valve 7 Packed stuffing box 8 Valve yoke 10 Base ring with packing rings 11 Bushing 12 Valve cover 13 Valve cone 14 Valve casing c Leakage steam