Академический Документы
Профессиональный Документы
Культура Документы
I. OBJECTIVES
1. To evaluate common-drain JFET amplifier as source-follower circuit.
2. To determine the significance of higher input and lower output
impedances
II. TEST EQUIPMENT
(1)Electronic Lab Console
(1)Dual-trace Oscilloscope
(1)Function Generator
(1)Power Supply
III.PARTS NEEDED
Resistors
(1)220 RED.RED.BRN
(1)1k
BRN.BLK.RED
(2)3.3k ORG.ORG.RED
(1) 10k BRN.BLK.ORG
(1) 15k BRN.GRN.ORG
(1) 47K YEL.VIO.ORG
(2) 4.7M YEL.VIO.GRN
Q1 (1)
2N3904
Q2 (1)
MPF102
CBE
Bottom
View
GSD
Bottom
View
(3) 10F
(1)100F
+
IV. PROCEDURE
1. Compute and record the following parameters for VDB commonemitter circuit shown in Figure 1. Assume ac = DC = 100.
VE = ___________
ZO = ___________
AV = ___________
VE = ___________
ZO = ___________
AV = ___________
8. Remove the load (RL = 10k) of the circuit in Figure 3. Connect the
audio transformer and speaker as you have done in Step 4. Hear and
observe the sound. Do you hear the same output as what you heard in
Step 4?
________________________________________________________________________
________________________________________________________________________
9. Define source follower circuit as illustrated by common-drain JFET
amplifier.
10.
V. QUESTIONS TO PONDER
1. Give advantage(s) of JFET over BJT as use to serve as source (or
emitter) follower.
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
2. Explain the effect of loading in a circuit. You can use computation.
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
3. In what characteristic/s of common-drain configuration is preferred
over common-source configuration?
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________