Академический Документы
Профессиональный Документы
Культура Документы
FOUNDRY
SHOT BLASTING
FORGING
LPATE & BILLET
ROLLETCHING
AIR POLLUTION CONTROL EQP.
Tumble blast machines
Swing table shot blasting machines
Multi table shot blasting machines
shot blasting machine for aluminum casting
spinner hanger type shot blasting machines
Door hook type shot blasting machines
Continuous monorail type shot blasting machines
Roller conveyor shot blasting machines
Pipe shot blasting machines
Plate shot blasting machines
Strip shot blasting machines
Stone and ceramic shot blasting machines
Cylinder shot blasting machines
Coil and wire shot blasting machines
Bar shot blasting machines
Wire rod shot blasting machines
Billet shot blasting machines
Wire mesh belt shot blasting machines
Shot peening machines
Roll etching machines
Railway shot blasting equipments
Steel mill equipments
Blast Rooms/Plants
Pressure and suction blast hand cabinets
Paver blasting machines
Sand blasting pot machines
Dust collectors
Abrasives
Spare parts and Accessories
TUMBLEBLAST
MACHINES
(BATCH
PROCESSING)
MODELS
SHOT
BLASTING
Advantage
- Manual workpiece
feeding
type
designed
for
an economic
consideration.
Tumble Belt Type Shot blasting Machine for removing the sand and the oxides surface of the workpieces such as the
casting, forging as well as the welding parts. Owing to the perfect protective measures, good shot blasting and
reasonable structure of the circulatory system, the machine can achieve satisfactory results when it is used to clean
up the hard-to-clean workpieces. This kind of machine can also be used to clean up the workpieces which are easy to
roll and fall and also be used to clean up the non-fragile parts as well as the non-core castings.
Before:
After:
Specific
Features:
Tumble Blast Advantages:
Used in applications where batches of parts can tumble on top of each
other without causing damage to the parts.
Typically used in automotive remanufacturing, heat treat facilities, and
small spring peening applications.
Can run large batches of smaller parts all together.
No manual flipping or rotating
All
sides
will
be
blasted
if
they
tumble
properly.
Blast Wheel The blast wheel is a used to propel the abrasive media at a particular
velocity via an electric motor and centrifugal force at an object in order to create
surface preparation. It is the heart of the equipment and it receives the most abrasion
as it is in constant contact with the media internally.
Screw Augers Typically used in areas where gravity feeding is not an option to
move media laterally to or from the bucket elevator system.
Bucket Elevator Belts Are used to move the abrasive media from the lower
elevator to the top auger at a set rate of speed.
Rotary Screens Typically used prior to the air wash separator to remove larger
heavy materials from the media.
Air Wash Separator Used to remove fine media, sand, small scale, and other
contaminants from the abrasive stream to keep it clean and sized properly. Other
methods may be used in addition to this in order to achieve more critical sizing for
more complex applications. Successful operation has a major impact on parts life,
abrasive consumption, type of finish, and speed of surface preparation negating
shorter cycle times.
Proper mechanical settings, routine inspections and adjustments along with consistent
air flow are required.
Monorail shot
blasting
machine with
automatic
worload
advancement. The monorail may be
built in different shapes (straight, Yshaped or ring-shaped).
Particularly suitable for treatment of
medium-large
articles,
also
of
complex shape, hanged individually or
in clusters on special fixtures.
Monorail shot
blasting
machine with
automatic
worload
advancement. The monorail may be
built in different shapes (straight, Yshaped or ring-shaped).
Particularly suitable for treatment of
medium-large
articles,
also
of
complex shape, hanged individually or
in clusters on special fixtures.
HANGER AUTOMATIC
BLASTING MACHINES
WORKLOAD
ADVANCEMENT
SHOT
Spinner hanger
A means of blasting parts while hanging them on a fixture or tree.
The fixture with parts on it will rotate while being blasted with one
or more blast wheels that are typically mounted on the back or side
of the cabinet. Dual chamber spinner hangers allow you to
add/remove parts while the other side is blasting making it as
efficient as possible. They also allow the chamber to index during
blasting.
Hangers allow you to buy oscillating blast wheels or some actually
move the parts/fixture to different positions during the blast cycle.
Single and Y-track monorails are offered as well as hanger table
combo models.
Application Possibilities
- The most difficult and complex fragile / irregularly shaped parts (medium or
large parts).
- Cleaning and deburring castings, welded structures and other parts.
Advantage
- Unequalled productivity and effectiveness.
- Reliability, longevity and progressive engineering.
- Compact form, installation without foundation pit.
- Complicated parts that are damageable can be cleaned thoroughly.
Spinner Hanger
This shot Blasting m/c is Having Two Blast Wheels & a blasting envelop of
size
1000x1200
&
Weight
Capacity
1.0Ton.
Blasting envelope Size & Weight Capacity of Hanger Can be Changed as per
Customer need and accordingly the No. of Blast wheels are increased to
achieve full Coverage. Out of Two manual push pull trolleys one is in side the
Blast Cabinet Where Blasting is Carried out the other is out side the blast
Cabinet for loading & unloading of Components. The Trolleys movement on
rail track has a Change over arrangement for shifting of trolley.
Sample Availability
Monorail shot
blasting
machine with
automatic
worload
advancement.
The
monorail
may be built in
different shapes
(straight,
Yshaped or ringshaped).
Particularly
suitable
for
treatment
of
medium-large
articles, also of
complex shape,
hanged
individually or in
clusters
on
special fixtures.
TABLEBLAST (ROTARY TABLE) MODELS SHOT
BLASTING MACHINES
Its a blast cabinet with typically one or two blast wheels aimed at an odd shaped or
heavy part that is laying on a round table. The table rotates like a microwave
turntable typically in a CCW direction when standing on it looking down. The
reclamation system recovers the media using a bucket elevator recovery system that
are sometimes assisted by an auger or two. They have an air wash separator to
remove the fines.
Application Possibilities
- Right solutions for the treatment of fragile, flat and very thin workpieces.
- Remove the rust ,burrs and contaminants on the workpieces and increase the fatigue strength by
stress peening.
Advantage
Before
After:
Specific Features:
Mostly used for odd shaped or heavy parts that cant easily be hung or tumbled.
Its typically a more economical solution where the parts could be hung but the
customer cant a spinner hanger. Typically not for small parts.
Better for lower volume parts.
Somewhat indestructible compared to a rubber belt or spinner hanger (robust).
Typically used in the oil & gas industry.
Table Blast Advantages:
Multipurpose You can lay parts on the table or hang them on a fixture that is
mounted on the table.
Allows for larger parts and smaller parts in the same machine.
SWING TABLE TYPE SHOT BLASTING MACHINE
SINGLE DOOR & DOUBLE DOOR
900mm (300kg), 1200mm(800), 1800mm(2500kg), 2400mm(3500kg)
Sample
Availability
1200 SWING TABLE DOUBLE DOOR M/C
CLEANING
MACHINE
WITH
Blast
cleaning
machine particularly
suitable for treatment of
mass
production
of
medium-large articles, also
of complex shape, hanged
individually or in clusters on
special fixtures.
Application Possibilities
- Blasting of batch sensitive parts which cannot be tumbled in bulk loads.
- Recommended for the treatment of particularly complex, heavy or large parts.
- Removal
of
rust,
moulding
sand,
burrs,
mill
and
forge
scale.
Advantage
- The most flexible and economical machine types for castings processing.
- Reduced use of space, shorter transport distances and no intermediate stocking requirements.
- Automatic production sequence to improve production rate and reduce manufacturing costs.
Advantage
- Suitable for cleaning the outer wall of LPG,CNC,gas cylinders.
- Removing the rust and oxide,increasing the surface
quality
- Removing the casting sands,cores and old paint for a better paint adhesive.
- Small floor space,less maintenance cost and high safety performance.
of
the
cylinders.
Application Possibilities
- Especially suitable for damageable thin-walled iron castings,aluminium castings and other small
parts.
- It is mainly used for automatic,aerospace,railway and other manufacturing industry.
- It can be used for mechanical parts shot blasting strengthen.
Advantage
- Wire mesh belt structure to protect the workpiece from any damage during the operation.
- Continuous shot blasting of flat workpiece to ensure a high efficiency.
- Fully automatic operation to reduce your labor cost.
CONTINUOUS
CONVEYOR
THROUGH-PASS
BLAST
CLEANING
MACHINE
WITH
ROLLER
Blast
cleaning
machine suit
able for roller
conveyor
shotblasting
of
section
bars
and
plate without
length
restrictions.
The
pieces
are
treated
360 in one
single pass.
Go
to
applications
Advantage
- Various
heating
method
for
preheating
and
drying
section.
Advantage
- For cleaning the internal wall of steel pipes and tubes.
- It removes the rust,oxide layer,welding slags and burrs from the internal wall of steel pipes.
- Making the metallic luster and prolonging steel pipe's life-time.
- Fully automatic design to provide high volume production and cost effective performance.
Application Possibilities
- Heavy and large steel angle and steel section descaling.
- Steel angle and steel section derusting.
- Steel angle and steel section preparation.
Advantage
- Floor mounted BE air wash separator for ease of observation and maintenance.
- The blast compartment and floor are consist of manganese plating to ensure longevity.
- Fully automatic design to provide high volume production and cost effective performance.
Application Possibilities
- Overhead combined crane can be equipped according to application.
- Process large and heavy castings or forgings,such as marine engines and power generation
components.
- The trolley is also available with a rotary type to rotate the workpiece for optimal shot blasting
coverage.
- Air blasting stations with guns can be equipped in the shot blasting cabinet for manual treatment
of workpiece.
Application Possibilities
- Suitable for the most complex fragile and irregularly shaped parts (medium or large parts).
- Cleaning and deburring castings, welded structures and shot peening dynamically stressed
components.
Advantage
- Unequalled productivity and effectiveness.
- Reliability, longevity and progressive engineering.
- Compact structure, installation without foundation pit.
- Complicated parts that are damageable can be cleaned thoroughly.
Advantage
- Floor mounted BE air wash separator for ease of observation and maintenance.
- The blast compartment and floor are consist of manganese plating to ensure longevity.
- Fully automatic design to provide high volume production and cost effective performance.
Your
BARE
WHEEL
ASSEMBLY
UNIT:
Application Possibilities
- Sand blasting cabinet is suitable for surface treatment of all products of metal,plastic and glass
etc.
- It is used for removing oxide skin,burrs and making scratch on decoration light.
Advantage
Equipped
with
cyclone
separation
system
and
dust
removal
system.
Application Possibilities
- Used in blasting room,bridge,tank body,ship derusting and other outdoor field.
- High efficient and accurate abrasive control system.
Application Possibilities
- Suit for small to middle size parts that is not damageable.
- Removal of moulding sand, burrs, mill, forge scale and rust.
- Be recommended for the treatment of small batch parts which can be tumbled in bulk loads.
Advantage
- Compact structure, installation without foundation pit.
- Simple designed, maximum uptime and minimum maintenance costs.
- Easy access and replacement of wear parts for simple and efficient maintenance.