Академический Документы
Профессиональный Документы
Культура Документы
Removal
1.
Remove the front door trim panel. For additional information, refer to Section 501-05.
2.
Disconnect the inside front door handle from the front door (20124).
1.
2.
3.
4.
5.
Position the front door window glass to access the track rivets through the door openings.
6.
7.
8.
9.
10.
If equipped, remove the equalizer bracket to front door inner panel nuts.
11.
12.
1.
2.
WARNING: Prior to power window removal, make sure the regulator arms are in a fixed position to prevent counterbalance spring unwind. failure to place
the regulator arms in a fixed position can cause the spring to suddenly release resulting in personal injury.
If equipped, remove the power window motor.
1.
2.
Installation
1.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may
need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.
Use Heavy Duty Riveter to install the new rivets.
Cycle the door glass to ensure engagement of the drive mechanism.