0 оценок0% нашли этот документ полезным (0 голосов)
70 просмотров1 страница
This document provides a quick reference to the defect acceptance criteria for pressure vessels according to pressure equipment code PD 5500. It lists the maximum allowed sizes for common weld defects like undercut, excess penetration, porosity, wormholes, and inclusions when using visual and radiographic examination techniques. Refer to Tables 5.7(1) and 5.7(3) of PD 5500 for full details of allowable inclusion dimensions and Table 5.7(2) for ultrasonic defect acceptance criteria.
This document provides a quick reference to the defect acceptance criteria for pressure vessels according to pressure equipment code PD 5500. It lists the maximum allowed sizes for common weld defects like undercut, excess penetration, porosity, wormholes, and inclusions when using visual and radiographic examination techniques. Refer to Tables 5.7(1) and 5.7(3) of PD 5500 for full details of allowable inclusion dimensions and Table 5.7(2) for ultrasonic defect acceptance criteria.
This document provides a quick reference to the defect acceptance criteria for pressure vessels according to pressure equipment code PD 5500. It lists the maximum allowed sizes for common weld defects like undercut, excess penetration, porosity, wormholes, and inclusions when using visual and radiographic examination techniques. Refer to Tables 5.7(1) and 5.7(3) of PD 5500 for full details of allowable inclusion dimensions and Table 5.7(2) for ultrasonic defect acceptance criteria.
(quick reference) 226 Engineers Guide to Pressure Equipment PD 5500 (Cat 1) Visual examination Radiographic examination Planar defects: Weld fit-up gap: Undercut: Throat thickness error: Excess penetration: Weld sag: Not permitted max 2 mm max 1 mm +5/-1 mm max 3 mm max 1.5 mm Cracks/lamellar tears Lack of fusion, any type Lack of root penetration Not permitted Porosity: max size of isolated pores is 25% of material thickness, up to a maximum diameter, which depends on the material thickness. Root concavity: max 1.5 mm Wormholes: max 6 mm length 1.5 mm width. Weld cap overlap: Not permitted Inclusions: allowable dimensions of solid inclusions depend on the position of the inclusion and the type of weld [refer to PD5500 Table 5.7(1)]. Refer to Tables 5.7(1) and 5.7(3) of PD 5500 for full details. Ultrasonic defect acceptance criteria are given in Table 5.7(2)