0 оценок0% нашли этот документ полезным (0 голосов)
24 просмотров1 страница
The document provides guidelines for adjusting sewing patterns based on zipper length and fabric type. Patterns for zippers between 25-30 inches should allow 1/2 to 3/4 extra inches depending on the fabric. Patch pockets and facings should match the body pattern. Padding patterns should be 1/4 inch larger all around for normal padding or 1/4 inch longer and 1/8 inch wider for thin insulation. Baffle patterns require 1/4 inch more length and 1/8 inch more width after quilting. Any necessary changes must be approved by management.
The document provides guidelines for adjusting sewing patterns based on zipper length and fabric type. Patterns for zippers between 25-30 inches should allow 1/2 to 3/4 extra inches depending on the fabric. Patch pockets and facings should match the body pattern. Padding patterns should be 1/4 inch larger all around for normal padding or 1/4 inch longer and 1/8 inch wider for thin insulation. Baffle patterns require 1/4 inch more length and 1/8 inch more width after quilting. Any necessary changes must be approved by management.
The document provides guidelines for adjusting sewing patterns based on zipper length and fabric type. Patterns for zippers between 25-30 inches should allow 1/2 to 3/4 extra inches depending on the fabric. Patch pockets and facings should match the body pattern. Padding patterns should be 1/4 inch larger all around for normal padding or 1/4 inch longer and 1/8 inch wider for thin insulation. Baffle patterns require 1/4 inch more length and 1/8 inch more width after quilting. Any necessary changes must be approved by management.
1. If zipper length is 25 to 30 pattern will be bigger then zipper.
For Normal fabric: + For down style: + For Coated fabric: Thin: + Thick: + 2. Patch Placket, Insert Placket, Inside Placket and Center Front Zipper Facing pattern should be same as body. (Front part) If need to increase or decrease pattern, Technician and Pattern Maker will take the decision to change sewing pattern. 3. Padding pattern bigger then fabric pattern For normal padding: Total +1/4 big (Length and Width) For thinsulate and both side heated Length: Total + 1/4 Width: Total + 1/8 4. Baffle pattern requirement For before quilting : same as Shall or Lining For after down filling quilting Length wise: +1/4 big from Shall or Lining Width wise: +1/8 big from Shall or Lining If any changes required the concern person should discuss with Unit manager or Korean Technician for changes.