Вы находитесь на странице: 1из 1

Intensifier

HYDRAULIC
• Applications include utilities, railroads, • Control valve included. Other Power Team

Pressure ratio 5:1


construction, riggers and others. valves available as an option to suit your
• Operates single- or double-acting specific application, if needed; consult
cylinders, jacks, and tools such as factory.
crimpers, spreaders, cable cutters, or tire • No reservoir level to maintain; uses low
tools. Version for use with double-acting pressure system as oil supply.
torque wrenches available. • Has 3⁄8" NPTF ports; compatible with
• May be used to operate two separate, standard fittings for low and high
single-acting tools (with integral valves) pressure systems.

Converts low-pressure portable


independently, without need for additional

hydraulic pumps or on-board


manifold.

hydraulic systems, into high


• Compact and rugged for use inside a

pressure power sources.


utility vehicle aerial bucket or stowing
in a vehicle.
PUMPS

HB443

10,000 psi

F
WARNING

C A
E
D

Output
Flow @ Prod.
Pump 10,000 A B C D E F Wt.
No. (psi) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)

HB44 44 cu. in./min. 8 5/8 14 1/2 6 1/8 2 3/4 4 1/2 10 1/2 16


Series

Output Flow Input Flow Input Flow Output Flow


For use with Order Valve Valve Valve Range Pressure Range
Cyl. Type Description No. Type No. Function (gpm) (psi) (gpm)
Single-Acting Hydraulic intensifier forHB443 3-Way 9520* Advance Hold 0 -10 300 - 2,000 0 - 2.5
single-acting systems 3-Position Return
Single-Acting/ Hydraulic intensifier for HB444 4-Way 9506* Advance Hold 0 -10 300 - 2,000 0 - 2.5
Double-Acting double-acting systems 3-Position Return
Double-Acting Hydraulic intensifier for HB445-RR 4-Way – Advance Hold 0 -10 300 - 2,000 0 - 2.5
double-acting torque 3-Position Return
wrench tools

† For maximum efficiency, recommended input flow is 5 gpm at a * “Posi-Check®” valve design, “Posi-Check®” guards against
maximum pressure of 2,000 psi. Higher flows and/or pressures pressure loss when valve is shifted from “advance” position
must be compensated for at the system pump (e.g., relief valve, to “hold” position.
variable flow devices, etc.).

110

Вам также может понравиться