Вы находитесь на странице: 1из 1

U T A M A

" PRODUSEN & SUPLAYER PERALATAN LABORATORIUM PENGUJIAN BAHAN KONSTRUKSI "

Concrete Testing Equipment

CO-500 CO-525
CO-500 Modulus of Elasticity in Concrete Test
For measuring average axial deformation of concrete
CO-470 cylindrical sample during compressi on test, cast alumunium,
CO-470 Vertical Cylinder Capping Set dial indicator 0.001 x 5 mm
ASTM C-617
Equipment for forming caps on ends of 15 cm diameter CO-525 Split Tensile Test
concrete cylinder to provide uniform loading surface for BS-1881, For split cylinder test on specimens of 150 x 300 mm
compression test. (dia. x length) self-supporting lower platen
CO-471 Vertical Cylinder Cast alumunium 1 Pc
Capper frame, rotating
ground table, for 150
mm dia. concrete
cylinder
CO-472 Capping Approx. 3 ltr cap, 1 Pc
Compound heating temperature
Warmer up to 200OC, 220 V
CO-473 Capping Ladle Stainless steel ladle, 1 Pc
Wooden handle
CO-474 Cylinder Carrier Double handle, snap 1 Pc
clamp, for 150 mm CO-560
dia., concrete cylinder
Demec' Mechanical Strain Gauge
CO-475 Capping Powder, app. 115OC 25 kg
The demountable mechanical strain gauge ( DEMEC ) was
Compound Pouring temperature
developed, at the Cement and Concrete Association, for
measuring strains in concrete structures.
CO-562 Demec' 200 mm gauge length. Supplied
Mechanical with a reference bar, setting-out
Strain Gauge, bar & case.
CO-563 Locating Discs. Stainless Steel, Box of 100.
CO-564 Reference bar for checking setting on strain
gauge.
CO-565 Punch Bar for accurately locating brass
insert in material to be measured.
The plated steel bar has one fixed
CO-477 point and a movable point for
CO-477-478 Unbonded Capping Set setting of 50,100,150,200,250
ASTM C1231; AASHTO T22, mm
Unbonded systems consist of 2 steel retainers and 2 strong CO-566 Brass Insert Pack of 100
0.5" (12.7mm) thick neoprene pads. The pads are reusable up CO-567 Contact Seats Pack of 2
to 100 times. Retaining cups last indefinitely with bearing CO-568 Contact Points Pack of 2
surfaces plane within 0.002" (0.05mm).
The following sizes are offered:
CO-477 For 150 mm, set of 2
CO-478 For 100 mm, set of 2

22

Jl. Tanjung Sadari No. 14 Surabaya 60177. Telp. 031-3555130 - 72727626 - 0811322426; Fax 031-3555130;
e-mail:mbtutama@surabaya.wasantara.net.id / sarmanbeddudaleng@yahoo.com

Вам также может понравиться