ROW ACL-Bullder Ver: 5.3.0.2 License to: eae
Project No PRIVATE
Project Name : VILLA
‘Job Title Ri (VILLA; Mr. MAQBEL ALNUAMI)
‘Gaks by: _Emicon ‘Checked by:___EmiCon
Reinforced Concrete Members ACI-Builder |... of Date: 16-41 2015
Design of Flexure According to ACI31@M-11
CALCULATE EQUIVALENT AREA OF STEEL DUE TO APPLIED MOME!
Tension-Controlled Section
Sections aretension-controlled whenthenet tensile strain in the extremetension steels equalto or greater than (.005
Justas theconcrete in compression reachesits assumed strain imitof 0.003.
B } - 0.85 fic
€c= 0.003
Cs= Asexfs
Ce = 0.85fe xB xy
a €y =Ty7s > 0.005,
Material Properties: § Strain Stress
fe -20MP2 —_Concretecompressive trengh
fy =420MPa Bending Reinforcenentyield strength
Reinf. modulus of elasticy
Flexare strenath reduction factor (Tension-controlled sadion)
Section breadth
Section height
Coverto tensionrebar center
Coverto compression rebar center
Applied Moment:
Mua = 20kNm
Singly Reinforced Section properties:
ec = 0.003 Concrete compressive stan
0.005 Reinf.tensilestrain
dt =H-de= 280.0 mm Effective depth
Ct ~ [ee/(ectee)]*dt ~ 0375%dt ~ 105.00 mm Neutral axis depth
(.85 >= {beta = 0.85-0.05{(Fc-28)/71} >= 0.65, then beta = 0.850 Equivalent depth factor
ymax = beta Ct = 89.25 mm Equivalent compressive block depth
As ={{0.85°FCB*Ymaxlfy} = 80920 m2 Maximum area of stee! for singly reinforced sedion
Mur = phi{0.85"Fe*B*Ymax[at-(Ymaxi2)]} = 72.00 kNm Maximum resistance momentfor singly renforced secon
Section works as a
ingly Reinforced Section because of
Calculate requiredarea of steel:
~ fsart(de"dt-{(2°Nua)/iphi"2.05°FC°B))} = 24.66 min Equivelent compressive block depth
As(teq) = 0.85°F™B*Y /fy = 196.58 mm Required area of steel
Check minimum & maximum area of steel:
‘Aemax= 0.04°8%dt = 1792.00 mm2 Maximum area of eel
As(req) = 196.58 mm2 < Asmax = 0.04°B"ét = 1792.00 mm2 then OK
‘asmin = min of [max ef{asmini,Asmin2), ASmin3] Minimum area of steel for Beam section
Where
Asmini = 0.25*[sqrt(Pe)/fyPPB*ck = 141.11 mm2
Asmin2 = (L4)fy)"B*d!
‘Asmin3 = (4/3)*As(req
‘Asmin = min of [max of(Asmin},Asmir2), Asmin3] = 149.38 mm2
As(req) = 196.58 mm2 > Asmin = 149.33 mm2 then OK
-Usedarea of steel: As(used) = 196.58 mm2
Used Bare: (214)
RCM ACT-Builder (Reinforced Concrete Members ACE Builder) Developed by: Eng. Hussein Rida