0 оценок0% нашли этот документ полезным (0 голосов)
71 просмотров2 страницы
An autoloader has fewer slots and drives than a tape library. It can only access slots sequentially while a tape library can randomly access any of its many more slots. A tape library also has more features that improve reliability, manageability, and scalability such as automatic cartridge identification, inventory management, cataloging, and supporting mixed drive technologies.
An autoloader has fewer slots and drives than a tape library. It can only access slots sequentially while a tape library can randomly access any of its many more slots. A tape library also has more features that improve reliability, manageability, and scalability such as automatic cartridge identification, inventory management, cataloging, and supporting mixed drive technologies.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
An autoloader has fewer slots and drives than a tape library. It can only access slots sequentially while a tape library can randomly access any of its many more slots. A tape library also has more features that improve reliability, manageability, and scalability such as automatic cartridge identification, inventory management, cataloging, and supporting mixed drive technologies.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
1 No. of drives 1 drive only At least 1 and higher.
Maximum can be up to 960 drives in 1 library 2 No. of slots Either 7, or 9 or 11 depending At least 10. Maximum slots in upon the manufacturer. Seagate 1 library can be 144000 Autoloader has 11 slots 3 Scalability No Yes 4 Upgradability No Yes 5 Access to Slots Sequential starting from slot Random. The robot can access no.1 going till the end to any one of the slot randomly 6 Automatic Identification of No. Autoloader doesn’t have Yes. Barcode scanner or cartridge barcode scanner to identify Digital Camera (in cartridge automatically (In an StorageTek) which identifies automated environment, the cartridges. cartridges are identified by Bar-code labels which needs to be correctly read) 7 Reliability Unreliable. Reliable 1) MSBF for robotics is 1) STK libraries are most 1.5 million . MTBF reliable with MSBF of figure is not published 2 million and MTBF but definitely expected of 360,000hrs. to be lower than library. 2) Can configure more 2) Has only 1 drive so than 1 drive, so failure failure of 1 drive stalls of 1 drive doesn’t stall the operation the operation 8 Mixed Drive support No Yes, in STK libraries. You can have different technologies of tape drives like LTO , DLT,SDLT,etc. in the same library 9 Automatic Calibration No Yes 10 Central Management No Yes (Network port is required for this) 11 Inventory Management (of No Yes ( takes automatic cartridges inside the inventory of cartridges) library) 12 Automatic Cataloguing of No Yes cartridges inside library