Академический Документы
Профессиональный Документы
Культура Документы
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision NO.
Revision Date
Revision Reason
R1.6
20130925
C373250901,
C373250981,
C373261204,
C373261281,
C373271504,
C373271581,
C373281801,
C373281881,
C373292104,
C373292181,
C373302404,
C373302481,
C373312713,
C373323013,
C373333313,
C373474909,
C373474942,
C373474943,
C373474948,
C373474949,
C373474954,
C373474955,
C373394400,
C373394401,
C373444754,
C373444760,
C373600001,
C373600081,
C373610304,
C373610381,
C373620604,
C373620681,
C373630901,
C373630981,
C373641204,
C373641281,
C373651504,
C373651581,
C373661813,
C373672113,
C373682413,
C373723003,
C373970000, C373970001.
The following counters have been added:
C373220653~C373220655,
C373485133,
C373485123~C373485126,
C373485135~C373485139,
C373485141,
C373485143~C373485147,
C373404450~C373404469,
C373474902~C373474908,
C373474917~C373474925,
C373474984~C373474991,
C373343804~C373343807,
C373394402,
C373414585,
C373424688~C373424691,
SJ-20121224143652-001|20130925(R1.6)
C373444755,
C373414586,
C373444756,
Revision NO.
Revision Date
Revision Reason
C373586700~C373586899,
C373692700~C373692704,
C373723004~C373723009,
C373723011~C373723014,
C373220636,
C373424634~C373424640,
C373424676~C373424687, C373990480~C373990491.
R1.5
20130510
C373230700~C373230705,
C373474943,
C373474947~C373474949,
C373474953~C373474955,
C373474959,
C373374202~C373374212, C374574202~C374574212.
The following counters have been added:
C373200048,
C373384350,
C373474960~C373474983,
C373384351,
C373733300~C373733303,
C373485112~C373485122.
R1.4
20130328
C373210200~C373210307,
C373210309,
C373210315,
C373210321,
C373210327,
C373210333,
C373210339,
C373210345,
C373210351,
C373210357,
C373210362~C373210371,
C373220608,
C373220611,
C373220614,
C373250981,
C373261281,
C373271581,
C373281801,
C373281881,
C373292181,
C373302481,
C373312713,
C373312714,
C373323013,
C373323014,
C373333313,
C373333314,
C373505375~C373505392,
C373505481~C373505487,
C373384300~C373384335,
C373505473~C373505479,
C373505490,
C373600001,
C373600081,
C373610382,
C373620681,
C373630901,
C373630981,
C373641281,
C373651581,
C373661813,
C373661814,
C373672113,
C373672114,
C373682413,
C373682414,
C373723003,
C373743403,
C373743404,
C373743421,
C373743422,
C373743510~C373743513,
C373743500~C373743503,
C373930016,
C373930017,
C373930022, C373930023.
The following counters have been added:
C373230701~C373230705,
C373292104,
C373302404,
C373261204,
C373384348,
C373271504,
C373384349,
C373414576~C373414584,
C373424643~C373424646,
C373444761,
C373485181~C373485192,
C373444762,
C373546248~C373546267,
C373556414,
C373566450~C373566503,
C373576600~C373576604,
C373576607~C373576611,
C373576614~C373576618,
Revision NO.
Revision Date
Revision Reason
C373610304,
C373620604,
C373641204,
C373651504,
20121210
C373505474~C373505488,
C373505491~C373505495,
C373485132,
C373250901,
C373250942,
C373250981,
C373250982,
C373250986,
C373261281,
C373271581,
C373281801,
C373281842,
C373281881,
C373281882,
C373281886,
C373292181,
C373302481,
C373312713,
C373323013,
C373333313,
C373600001,
C373600042,
C373600081,
C373600082,
C373600086,
C373610381,
C373620681,
C373620682,
C373630901,
C373630942,
C373630981,
C373630982,
C373630986,
C373641281,
C373651581,
C373661806,
C373661813,
C373661819,
C373672106,
C373672107,
C373672113,
C373682413,
C373682419,
C373743402,
C373743404, C373743500~C373743509.
R1.2
20121130
C373200049,
C373200075,
C373200063,
C373200097~C373200103,
C373210512~C373210521,
C373505473~C373505479,
C373505481~C373505487,
C373505489~C373505499,
C373220617,
C373474909,
C373474942~C373474959,
C373474927,
C373485132,
C373474928,
C373250901,
C373250981,
C373261281,
C373261282,
C373271581,
C373271582,
C373281801,
C373281881,
C373292181,
C373292182,
C373302481,
C373312713,
C373323013,
C373333313,
,C373600001,
C373600081,
C373610381,
C373610382,
C373620681,
C373620682,
C373630901,
C373630981,
C373641281,
C373641282,
C373651581,
C373661813,
C373661817~C373661820,
C373672113,
C373682413,
C373682417~C373682420,
C373743400~C373743435,
C373743500~C373743519,
C373343765~C373343791,
C373343796~C373343803,
C373353956~C373353961,
C373374242,
C373444754,
C373374243,
C373364118,
C373364119,
C373434716~C373434740,
C373444757~C373444760,
C373454816~C373454821, C373556400~C373556413.
R1.1
20120815
R1.0
20120630
First edition.
SJ-20121224143652-001|20130925(R1.6)
Contents
About This Manual ......................................................................................... I
Chapter 1 Statistics of RRC Connection .................................................. 1-1
1.1 RRC Connection Establishment .......................................................................... 1-2
1.1.1 Flow Charts and Sampling Points .............................................................. 1-2
1.1.2 Counter List ............................................................................................. 1-3
1.1.3 Counter Description.................................................................................. 1-3
1.2 RRC Connection Re-establishment ................................................................... 1-15
1.2.1 Flow Charts and Sampling Points ............................................................ 1-15
1.2.2 Counter List ........................................................................................... 1-16
1.2.3 Counter Description................................................................................ 1-18
1.3 RRC Connection Re-configuration..................................................................... 1-32
1.3.1 Flow Charts and Sampling Points ............................................................ 1-32
1.3.2 Counter List ........................................................................................... 1-33
1.3.3 Counter Description................................................................................ 1-33
1.4 RRC Connection Release ................................................................................. 1-35
1.4.1 Flow Charts and Sampling Points ............................................................ 1-35
1.4.2 Counter List ........................................................................................... 1-36
1.4.3 Counter Description................................................................................ 1-36
1.5 RRC Connection Number ................................................................................. 1-44
1.5.1 Flow Charts and Sampling Points ............................................................ 1-44
1.5.2 Counter List ........................................................................................... 1-45
1.5.3 Counter Description................................................................................ 1-45
1.6 RRC Connection Number(PLMN) ...................................................................... 1-49
1.6.1 Flow Charts and Sampling Points ............................................................ 1-49
1.6.2 Counter List ........................................................................................... 1-49
1.6.3 Counter List ........................................................................................... 1-50
1.7 RRC Connection Time ...................................................................................... 1-51
1.7.1 Flow Charts and Sampling Points ............................................................ 1-51
1.7.2 Counter List ........................................................................................... 1-52
1.7.3 Counter Description................................................................................ 1-52
I
SJ-20121224143652-001|20130925(R1.6)
II
SJ-20121224143652-001|20130925(R1.6)
VI
SJ-20121224143652-001|20130925(R1.6)
VII
SJ-20121224143652-001|20130925(R1.6)
Figures............................................................................................................. I
X
SJ-20121224143652-001|20130925(R1.6)
Intended Audience
l
l
l
Summary
2, Statistics of E-RAB
3, Statistics of UE Context
4, Statistics of S1/X2-connection
5, Statistics of SON
8, Statistics of Redirection
9, Statistics of Handover
I
SJ-20121224143652-001|20130925(R1.6)
II
SJ-20121224143652-001|20130925(R1.6)
Chapter 1
1-1
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
1-2
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373200000
C373200001
C373200002
C373200003
C373200004
C373200005
C373200006
C373200007
C373200008
10
C373200009
11
C373200010
12
C373200011
13
C373200012
14
C373200013
15
C373200014
16
C373200015
17
C373200016
18
C373200017
19
C373200018
20
C373200019
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
mt-access due to timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-4
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of failed RRC establishment for
mt-access due to admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs other failures during RRC Connection setup
procedure and the establishmentCause is mt-access.
Sampling Point 4
Explanation
1-5
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
1-6
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
mo-Signalling due to admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
mo-Signalling due to other failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
1-7
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB occurs other failures during RRC Connection setup
procedure and the establishmentCause is mo-signalling.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
1-8
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
mo-Data due to admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-9
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs other failures during RRC Connection setup
procedure and the establishmentCause is mo-Data.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
1-10
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of failed RRC establishment for
highPriorityAccess due to timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
highPriorityAccess due to admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
1-11
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
highPriorityAccess due to other failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs other failures during RRC Connection setup
procedure and the establishmentCause is highPriorityAccess.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-12
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
emergency due to timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of failed RRC establishment for
emergency due to admission failures.
Sampling Interval
Event triggered
1-13
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs other failures during RRC Connection setup
procedure and the establishmentCause is emergency.
Sampling Point 4
Explanation
Updated
1-14
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling Point 1:
The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT REQUEST message from the UE and selects to set up the
RRC connection reestablishment through the CCCH.
Sampling Point 2: The EUTRAN sends the RRC CONNECTION REESTABLISHMENT message to the UE.
Sampling Point 3:
The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT COMPLETE message from the UE, indicating that the RRC
connection reestablishment has been set up successfully.
Sampling Point 4:
The EUTRAN sends the RRC CONNECTION
REESTABLISHMENT REJECT message to the UE, indicating that the RRC
connection reestablishment has been set up with failure.
Sampling Point 5: The EUTRAN cann't receive the RRC CONNECTION
REESTABLISHMENT COMPLETE message from the UE, therefore the timer detects
overtime.
1-15
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373200060
C373200061
C373200062
C373200063
C373200064
C373200065
C373200066
1-16
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
8
C373200067
C373200068
10
C373200069
11
C373200070
12
C373200071
13
C373200072
14
C373200073
15
C373200074
16
C373200075
17
C373200076
18
C373200077
19
C373200097
20
C373200098
21
C373200099
22
C373200100
23
C373200101
24
C373200102
25
C373200103
1-17
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReestablishmentComplete message not received by the eNodeB and the ReestablishmentCause
is handoverfailures. Each failed RRC connection re-establishment is
added to the counter.
1-18
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
handoverfailures.Each failed RRC connection re-establishment is added to
the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-19
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
handoverfailures.Each failed RRC connection re-establishment is added to
the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-20
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-21
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReestablishmentComplete message not received by the eNodeB and the ReestablishmentCause
is reconfigurationfailures. Each failed RRC connection re-establishment is
added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
reconfigurationfailures.Each failed RRC connection re-establishment is
added to the counter.
1-22
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
reconfigurationfailures.Each failed RRC connection re-establishment is
added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-23
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
1-24
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReestablishmentComplete message not received by the eNodeB and the ReestablishmentCause
is otherfailures. Each failed RRC connection re-establishment is added to
the counter.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
otherfailures.Each failed RRC connection re-establishment is added to
the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
otherfailures.Each failed RRC connection re-establishment is added to
the counter.
Updated
1-26
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-27
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReestablishmentComplete message not received by the eNodeB and the
ReestablishmentCause is inter-RAT handoverfailures. Each failed RRC
connection re-establishment is added to the counter.
1-28
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
For admission failures, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
inter-RAT handoverfailures.Each failed RRC connection re-establishment
is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-29
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
For not finding UE context, the eNodeB sends an RRCConnectionReestablishmentReject message to the UE and the ReestablishmentCause is
inter-RAT handoverfailures.Each failed RRC connection re-establishment
is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-30
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
1-31
SJ-20121224143652-001|20130925(R1.6)
Updated
l
l
1-32
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373200078
C373200079
C373200080
C373200081
C373200082
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1.3.3.2 C373200079 Number of RRC Connection Reconfig Failure due to Radio Link
Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
1-33
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 4
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB during non-handover
procedure. the above failed RRC connection Reconfigration is added to
the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-34
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB again receives the RRCConnectionReestablishmentRequest message from UE during waiting for the
RRCConnectionReconfigurationComplete message.
Sampling Point 3
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-35
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
Counter
Counter Name
Number
1
C373200020
C373200021
C373200022
C373200023
C373200024
C373200034
C373200048
C373200049
C373200050
10
C373200051
11
C373200052
12
C373200053
13
C373200054
14
C373200083
Sampling Interval
Event triggered
1-36
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-37
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1.4.3.4 C373200023 Number of RRC Connection Release due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the cell block command or occurs cell reset
triggerd by warning or other reason, will sends the RRCConnectionRelease
message to the UE. The counter is used to count the number of RRC
Connection Release initiated by eNodeB due to the above condition.
Updated
1-38
SJ-20121224143652-001|20130925(R1.6)
1.4.3.5 C373200024 Number of RRC Connection Release by ENB due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1-39
SJ-20121224143652-001|20130925(R1.6)
1.4.3.7 C373200048 Number of RRC Connection Release by ENB due to UE Not Online
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 1
Explanation
1-40
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
1.4.3.10 C373200051 Number of RRC Connection Release due to ENB Radio Link
Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
1-41
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
1-42
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
1.4.3.13 C373200054 Number of RRC Connection Release By MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
1-43
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Point 1: When the EUTRAN receives the RRC CONNECTION SETUP
COMPLETE message from the UE, indicating that the RRC connection has been
setup successfully, the RRC connection number is incremented by 1.
1-44
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 2: When the EUTRAN sends the RRC CONNECTION RELEASE
message to the UE, the RRC connection number is decreased by 1.
Counter
Counter Name
Number
1
C373200029
C373200030
C373200031
C373940406
C373940407
C373940408
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the new value when the RRC setup user in a
sampling point is larger than the counter.
1-45
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
1-46
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is updated by the RRC connection setup user at last sampling
points.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
eNodeB
Sampling Point
The eNodeB collects the number of RRC user at sampling time according
to "Explanation".
Explanation
Updated
Sampling Interval
10 s
1-47
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
Unit
Measurement Object
eNodeB
Sampling Point
The eNodeB collects the number of RRC user at sampling time according
to "Explanation".
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
eNodeB
Sampling Point
The eNodeB collects the number of RRC user at sampling time according
to "Explanation".
Explanation
Updated
1-48
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 1: When the EUTRAN receives the RRC CONNECTION SETUP
COMPLETE message from the UE, indicating that the RRC connection has been
setup successfully, the RRC connection number is incremented by 1.
Sampling Point 2: When the EUTRAN sends the RRC CONNECTION RELEASE
message to the UE, the RRC connection number is decreased by 1.
Counter
Counter Name
Number
1
C374400029
C374400030
1-49
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
Explanation
Updated
The counter is replaced with the new value when the RRC setup user in a
sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
1-50
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
l
l
Sampling 1:
The eNodeb records the start time when it receives the
RRCConnectionRequest message from UE.
Sampling 2:
The eNodeb records the end time when it receives the
RRCConnectionRequest message from UE.
1-51
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling Point 1: The eNodeb records the start time when it receives the
RRCConnectionRequest message from UE.
Sampling Point 2: The eNodeb records the end time when it receives the RRCConnectionReconfigurationComplete message from UE, indicating that the RRC connection
configuration has been configed successfully.
Counter
Counter Name
Number
1
C373200032
C373200033
The counter is used to count the mean time that takes to establish an
RRC connection.
1-52
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the maximum time that takes to establish
an RRC connection.
Sampling Interval
Event triggered
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the RRC setup time in
a sampling point is larger than the counter.
1-53
SJ-20121224143652-001|20130925(R1.6)
1-54
SJ-20121224143652-001|20130925(R1.6)
Chapter 2
Statistics of E-RAB
Table of Contents
Initial E-RAB Setup.....................................................................................................2-2
Additional E-RAB Setup ...........................................................................................2-45
E-RAB Modification ..................................................................................................2-87
E-RAB Release ......................................................................................................2-130
E-RAB Handover....................................................................................................2-225
E-RAB Activity........................................................................................................2-255
E-RAB Number ......................................................................................................2-265
E-RAB Setup Time .................................................................................................2-280
2-1
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
Sampling Point 1: The EUTRAN receives the INITIAL CONTEXT SETUP REQUEST
message from the MME.
Sampling Point 2:
The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
Sampling Point 3:
The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
Sampling Point 4: The EUTRAN sends the INITIAL CONTEXT SETUP RESPONSE
message to the MME, indicating that the E-RAB Establishment has been set up
successfully.
Sampling
Point
5:
The
EUTRAN
does
not
receive
the
RRCConnectionReconfigurationComplete message from the UE, and the timer
2-2
SJ-20121224143652-001|20130925(R1.6)
l
l
l
expires. Then EUTRAN sends the INITIAL CONTEXT SETUP FAILURE message
to the MME.
Sampling Point 6: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of no UE context.
Sampling Point 7: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of AS failure.
Sampling Point 8:
The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT REQUEST message from the UE.
Counter
Counter Name
Number
1
C373210200
C373210201
Number of Initial QCI1 SAE Bearers Setup Failures due to ENB Admission
Failure
C373210202
C373210203
Number of Initial QCI1 SAE Bearers Setup Failures due to Security Failure
C373210204
Number of Initial QCI1 SAE Bearers Setup Failures due to Parameter Error
C373210205
Number of Initial QCI1 SAE Bearers Setup Failures due to Other Reason
C373210206
C373210207
Number of Initial QCI2 SAE Bearers Setup Failures due to ENB Admission
Failure
C373210208
10
C373210209
Number of Initial QCI2 SAE Bearers Setup Failures due to Security Failure
11
C373210210
Number of Initial QCI2 SAE Bearers Setup Failures due to Parameter Error
12
C373210211
Number of Initial QCI2 SAE Bearers Setup Failures due to Other Reason
13
C373210212
14
C373210213
Number of Initial QCI3 SAE Bearers Setup Failures due to ENB Admission
Failure
15
C373210214
16
C373210215
Number of Initial QCI3 SAE Bearers Setup Failures due to Security Failure
17
C373210216
Number of Initial QCI3 SAE Bearers Setup Failures due to Parameter Error
18
C373210217
Number of Initial QCI3 SAE Bearers Setup Failures due to Other Reason
19
C373210218
2-3
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
20
C373210219
Number of Initial QCI4 SAE Bearers Setup Failures due to ENB Admission
Failure
21
C373210220
22
C373210221
Number of Initial QCI4 SAE Bearers Setup Failures due to Security Failure
23
C373210222
Number of Initial QCI4 SAE Bearers Setup Failures due to Parameter Error
24
C373210223
Number of Initial QCI4 SAE Bearers Setup Failures due to Other Reason
25
C373210224
26
C373210225
Number of Initial QCI5 SAE Bearers Setup Failures due to ENB Admission
Failure
27
C373210226
28
C373210227
Number of Initial QCI5 SAE Bearers Setup Failures due to Security Failure
29
C373210228
Number of Initial QCI5 SAE Bearers Setup Failures due to Parameter Error
30
C373210229
Number of Initial QCI5 SAE Bearers Setup Failures due to Other Reason
31
C373210230
32
C373210231
Number of Initial QCI6 SAE Bearers Setup Failures due to ENB Admission
Failure
33
C373210232
34
C373210233
Number of Initial QCI6 SAE Bearers Setup Failures due to Security Failure
35
C373210234
Number of Initial QCI6 SAE Bearers Setup Failures due to Parameter Error
36
C373210235
Number of Initial QCI6 SAE Bearers Setup Failures due to Other Reason
37
C373210236
38
C373210237
Number of Initial QCI7 SAE Bearers Setup Failures due to ENB Admission
Failure
39
C373210238
40
C373210239
Number of Initial QCI7 SAE Bearers Setup Failures due to Security Failure
41
C373210240
Number of Initial QCI7 SAE Bearers Setup Failures due to Parameter Error
42
C373210241
Number of Initial QCI7 SAE Bearers Setup Failures due to Other Reason
43
C373210242
44
C373210243
Number of Initial QCI8 SAE Bearers Setup Failures due to ENB Admission
Failure
2-4
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
45
C373210244
46
C373210245
Number of Initial QCI8 SAE Bearers Setup Failures due to Security Failure
47
C373210246
Number of Initial QCI8 SAE Bearers Setup Failures due to Parameter Error
48
C373210247
Number of Initial QCI8 SAE Bearers Setup Failures due to Other Reason
49
C373210248
50
C373210249
Number of Initial QCI9 SAE Bearers Setup Failures due to ENB Admission
Failure
51
C373210250
52
C373210251
Number of Initial QCI9 SAE Bearers Setup Failures due to Security Failure
53
C373210252
Number of Initial QCI9 SAE Bearers Setup Failures due to Parameter Error
54
C373210253
Number of Initial QCI9 SAE Bearers Setup Failures due to Other Reason
55
C373505375
Number of Initial QCI1 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
56
C373505376
Number of Initial QCI2 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
57
C373505377
Number of Initial QCI3 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
58
C373505378
Number of Initial QCI4 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
59
C373505379
Number of Initial QCI5 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
60
C373505380
Number of Initial QCI6 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
61
C373505381
Number of Initial QCI7 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
62
C373505382
Number of Initial QCI8 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
63
C373505383
Number of Initial QCI9 SAE Bearers Setup Failures due to Receiving RRC
Re-establishment Request
64
C373505473
65
C373505474
Number of Initial SAE Bearers Setup Failures due to ENB Admission Failure
66
C373505475
67
C373505476
2-5
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
68
C373505477
69
C373505478
70
C373505479
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.2 C373210201 Number of Initial QCI1 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI1 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-6
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.1.3.3 C373210202 Number of Initial QCI1 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI1 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI1 E-RAB failed to establish is
added to the counter.
Updated
2-7
SJ-20121224143652-001|20130925(R1.6)
2.1.3.4 C373210203 Number of Initial QCI1 SAE Bearers Setup Failures due to Security
Failure
Definition
The counter is used to count the number of initial QCI1 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI1 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI1 E-RAB failed to establish is added to the counter.
Updated
2.1.3.5 C373210204 Number of Initial QCI1 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI1 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-8
SJ-20121224143652-001|20130925(R1.6)
Updated
2.1.3.6 C373210205 Number of Initial QCI1 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI1 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-9
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.1.3.8 C373210207 Number of Initial QCI2 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI2 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.9 C373210208 Number of Initial QCI2 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI2 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-10
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI2 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.10 C373210209 Number of Initial QCI2 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI2 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI2 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI2 E-RAB failed to establish is added to the counter.
Updated
2-11
SJ-20121224143652-001|20130925(R1.6)
2.1.3.11 C373210210 Number of Initial QCI2 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI2 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.12 C373210211 Number of Initial QCI2 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI2 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-12
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.14 C373210213 Number of Initial QCI3 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI3 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-13
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.1.3.15 C373210214 Number of Initial QCI3 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI3 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI3 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.16 C373210215 Number of Initial QCI3 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI3 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
2-14
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI3 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI3 E-RAB failed to establish is added to the counter.
Updated
2.1.3.17 C373210216 Number of Initial QCI3 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI3 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-15
SJ-20121224143652-001|20130925(R1.6)
2.1.3.18 C373210217 Number of Initial QCI3 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI3 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-16
SJ-20121224143652-001|20130925(R1.6)
2.1.3.20 C373210219 Number of Initial QCI4 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI4 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.21 C373210220 Number of Initial QCI4 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI4 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-17
SJ-20121224143652-001|20130925(R1.6)
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI4 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.22 C373210221 Number of Initial QCI4 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI4 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI4 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI4 E-RAB failed to establish is added to the counter.
Updated
2.1.3.23 C373210222 Number of Initial QCI4 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI4 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-18
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.1.3.24 C373210223 Number of Initial QCI4 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI4 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
2-19
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI5 E-RAB for every QCI5
E-RAB when eNodeB sends the InitialContextSetupResponse message to
MME and the E-RAB Setup List IE includes the QCI5 E-RAB.
2.1.3.26 C373210225 Number of Initial QCI5 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI5 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-20
SJ-20121224143652-001|20130925(R1.6)
2.1.3.27 C373210226 Number of Initial QCI5 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI5 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI5 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.28 C373210227 Number of Initial QCI5 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI5 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI5 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI5 E-RAB failed to establish is added to the counter.
2-21
SJ-20121224143652-001|20130925(R1.6)
Updated
2.1.3.29 C373210228 Number of Initial QCI5 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI5 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.30 C373210229 Number of Initial QCI5 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI5 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-22
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.32 C373210231 Number of Initial QCI6 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI6 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-23
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.33 C373210232 Number of Initial QCI6 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI6 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI6 E-RAB failed to establish is
added to the counter.
Updated
2-24
SJ-20121224143652-001|20130925(R1.6)
2.1.3.34 C373210233 Number of Initial QCI6 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI6 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI6 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI6 E-RAB failed to establish is added to the counter.
Updated
2.1.3.35 C373210234 Number of Initial QCI6 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI6 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-25
SJ-20121224143652-001|20130925(R1.6)
Updated
2.1.3.36 C373210235 Number of Initial QCI6 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI6 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-26
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.1.3.38 C373210237 Number of Initial QCI7 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI7 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.39 C373210238 Number of Initial QCI7 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI7 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-27
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI7 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.40 C373210239 Number of Initial QCI7 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI7 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI7 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI7 E-RAB failed to establish is added to the counter.
Updated
2-28
SJ-20121224143652-001|20130925(R1.6)
2.1.3.41 C373210240 Number of Initial QCI7 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI7 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.42 C373210241 Number of Initial QCI7 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI7 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-29
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.44 C373210243 Number of Initial QCI8 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI8 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-30
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.1.3.45 C373210244 Number of Initial QCI8 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI8 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI8 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.46 C373210245 Number of Initial QCI8 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI8 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
2-31
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI8 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI8 E-RAB failed to establish is added to the counter.
Updated
2.1.3.47 C373210246 Number of Initial QCI8 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI8 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-32
SJ-20121224143652-001|20130925(R1.6)
2.1.3.48 C373210247 Number of Initial QCI8 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI8 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-33
SJ-20121224143652-001|20130925(R1.6)
2.1.3.50 C373210249 Number of Initial QCI9 SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial QCI9 E-RABs failed to
setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.51 C373210250 Number of Initial QCI9 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of initial QCI9 E-RABs failed to
setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-34
SJ-20121224143652-001|20130925(R1.6)
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP RESPONSE, or INITIAL CONTEXT SETUP FAILURE
message to the MME, in which each QCI9 E-RAB failed to establish is
added to the counter.
Updated
2.1.3.52 C373210251 Number of Initial QCI9 SAE Bearers Setup Failures due to
Security Failure
Definition
The counter is used to count the number of initial QCI9 E-RABs failed to
setup for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB QCI9 E-RAB failed to setup due to security mode
failures,eNodeB replies the InitialContextSetupFailure message to MME.
Sampling Point 7
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each QCI9 E-RAB failed to establish is added to the counter.
Updated
2.1.3.53 C373210252 Number of Initial QCI9 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of initial QCI9 E-RABs failed to
setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-35
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.1.3.54 C373210253 Number of Initial QCI9 SAE Bearers Setup Failures due to Other
Reason
Definition
The counter is used to count the number of initial QCI9 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.1.3.55 C373505375 Number of Initial QCI1 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI1 E-RABs failed to
setup for re-establishment.
2-36
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.56 C373505376 Number of Initial QCI2 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI2 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2-37
SJ-20121224143652-001|20130925(R1.6)
2.1.3.57 C373505377 Number of Initial QCI3 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI3 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.58 C373505378 Number of Initial QCI4 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI4 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-38
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.59 C373505379 Number of Initial QCI5 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI5 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.60 C373505380 Number of Initial QCI6 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI6 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-39
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.61 C373505381 Number of Initial QCI7 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI7 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.62 C373505382 Number of Initial QCI8 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI8 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-40
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2.1.3.63 C373505383 Number of Initial QCI9 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of initial QCI9 E-RABs failed to
setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-41
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse message to MME and the E-RAB Setup
List IE includes the E-RAB.
2.1.3.65 C373505474 Number of Initial SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
The counter is used to count the number of initial E-RABs failed to setup
for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs E-RAB admission failures then replies the
InitialContextSetupResponse or InitialContextSetupFailure message to
MME.
Sampling Point 4, Sampling Point 6
Explanation
Updated
2.1.3.66 C373505475 Number of Initial SAE Bearers Setup Failures due to Uu Interface
Failure
Definition
The counter is used to count the number of initial E-RABs failed to setup
for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
2-42
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an INITIAL
CONTEXT SETUP FAILURE message to the MME, in which each E-RAB
failed to establish is added to the counter.
Updated
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupFailure message to MME due to timeout of waiting for
the RRCConnectionReconfigurationComplete message.
2.1.3.67 C373505476 Number of Initial SAE Bearers Setup Failures due to Security
Failure
Definition
The counter is used to count the number of initial E-RABs failed to setup
for security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the SecurityModefailures from the UE, then
sends a INITIAL CONTEXT SETUP FAILURE message to the MME, in
which each E-RAB failed to establish is added to the counter.
Updated
2-43
SJ-20121224143652-001|20130925(R1.6)
2.1.3.68 C373505477 Number of Initial SAE Bearers Setup Failures due to Parameter
Error
Definition
The counter is used to count the number of initial E-RABs failed to setup
for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse or InitialContextSetupFailure message to
MME due to parameter error.
2.1.3.69 C373505478 Number of Initial SAE Bearers Setup Failures due to Receiving
RRC Re-establishment Request
Definition
The counter is used to count the number of initial E-RABs failed to setup
for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the InitialContextSetupfailure message to the MME due to RRC
re-establishment.
2-44
SJ-20121224143652-001|20130925(R1.6)
2.1.3.70 C373505479 Number of Initial SAE Bearers Setup Failures due to Other Reason
Definition
The counter is used to count the number of initial E-RABs failed to setup
for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when eNodeB sends the
InitialContextSetupResponse or InitialContextSetupFailure message to
MME due to other reason.
2-45
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling Point 1: The EUTRAN receives the E-RAB SETUP REQUEST message
from the MME.
Sampling Point 2: The EUTRAN sends the RRC CONNECTION RECONFIGURATION message to the UE.
Sampling Point 3:
The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
Sampling Point 4: The EUTRAN sends the E-RAB SETUP RESPONSE message to
the MME, indicating that the E-RAB Establishment has been set up successfully.
Sampling
Point
5:
The
EUTRAN
does
not
receive
the
RRCConnectionReconfigurationComplete message from the UE, and the timer
expires. Then EUTRAN sends the E-RAB SETUP FAILURE message to the MME.
Counter
Counter Name
Number
1
C373210254
C373210255
C373210256
C373210257
2-46
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
5
C373210258
C373210259
Number of Additional QCI1 SAE Bearers Setup Failures due to Other Reason
C373210260
C373210261
C373210262
10
C373210263
11
C373210264
12
C373210265
Number of Additional QCI2 SAE Bearers Setup Failures due to Other Reason
13
C373210266
14
C373210267
15
C373210268
16
C373210269
17
C373210270
18
C373210271
Number of Additional QCI3 SAE Bearers Setup Failures due to Other Reason
19
C373210272
20
C373210273
21
C373210274
22
C373210275
23
C373210276
24
C373210277
Number of Additional QCI4 SAE Bearers Setup Failures due to Other Reason
25
C373210278
2-47
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
26
C373210279
27
C373210280
28
C373210281
29
C373210282
30
C373210283
Number of Additional QCI5 SAE Bearers Setup Failures due to Other Reason
31
C373210284
32
C373210285
33
C373210286
34
C373210287
35
C373210288
36
C373210289
Number of Additional QCI6 SAE Bearers Setup Failures due to Other Reason
37
C373210290
38
C373210291
39
C373210292
40
C373210293
41
C373210294
42
C373210295
Number of Additional QCI7 SAE Bearers Setup Failures due to Other Reason
43
C373210296
44
C373210297
45
C373210298
2-48
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
46
C373210299
47
C373210300
48
C373210301
Number of Additional QCI8 SAE Bearers Setup Failures due to Other Reason
49
C373210302
50
C373210303
51
C373210304
52
C373210305
53
C373210306
54
C373210307
Number of Additional QCI9 SAE Bearers Setup Failures due to Other Reason
55
C373505384
56
C373505385
57
C373505386
58
C373505387
59
C373505388
60
C373505389
61
C373505390
62
C373505391
63
C373505392
64
C373505481
65
C373505482
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
66
C373505483
67
C373505484
68
C373505485
69
C373505486
70
C373505487
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI1 E-RAB.
Sampling Point 4.
Explanation
Updated
2.2.3.2 C373210255 Number of Additional QCI1 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-50
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI1 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI1 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.3 C373210256 Number of Additional QCI1 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI1 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.4 C373210257 Number of Additional QCI1 SAE Bearers Setup Failures due to
Handover Trigger
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for handover trigger.
2-51
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.5 C373210258 Number of Additional QCI1 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI1 E-RAB failed to establish is added to the counter.
Updated
2-52
SJ-20121224143652-001|20130925(R1.6)
2.2.3.6 C373210259 Number of Additional QCI1 SAE Bearers Setup Failures due to
Other Reason
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI1 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI2 E-RAB.
Sampling Point 4.
Explanation
Updated
2-53
SJ-20121224143652-001|20130925(R1.6)
2.2.3.8 C373210261 Number of Additional QCI2 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI2 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI2 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.9 C373210262 Number of Additional QCI2 SAE Bearers Setup Failures due to Uu
Interface Failure
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI2 E-RAB
failed to establish is added to the counter.
2-54
SJ-20121224143652-001|20130925(R1.6)
Updated
2.2.3.10 C373210263 Number of Additional QCI2 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.11 C373210264 Number of Additional QCI2 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-55
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.2.3.12 C373210265 Number of Additional QCI2 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI2 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI3 E-RAB.
Sampling Point 4.
2-56
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.2.3.14 C373210267 Number of Additional QCI3 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI3 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI3 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.15 C373210268 Number of Additional QCI3 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-57
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI3 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.16 C373210269 Number of Additional QCI3 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.17 C373210270 Number of Additional QCI3 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-58
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI3 E-RAB failed to establish is added to the counter.
Updated
2.2.3.18 C373210271 Number of Additional QCI3 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI3 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
2-59
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI4 E-RAB.
Sampling Point 4.
Explanation
Updated
2.2.3.20 C373210273 Number of Additional QCI4 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI4 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI4 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.21 C373210274 Number of Additional QCI4 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for RRC reconfiguration complete timeout.
2-60
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI4 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.22 C373210275 Number of Additional QCI4 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-61
SJ-20121224143652-001|20130925(R1.6)
2.2.3.23 C373210276 Number of Additional QCI4 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI4 E-RAB failed to establish is added to the counter.
Updated
2.2.3.24 C373210277 Number of Additional QCI4 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI4 E-RAB failed to establish is added to the counter.
Updated
2-62
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI5 E-RAB.
Sampling Point 4.
Explanation
Updated
2.2.3.26 C373210279 Number of Additional QCI5 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI5 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI5 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2-63
SJ-20121224143652-001|20130925(R1.6)
2.2.3.27 C373210280 Number of Additional QCI5 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI5 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.28 C373210281 Number of Additional QCI5 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-64
SJ-20121224143652-001|20130925(R1.6)
Updated
2.2.3.29 C373210282 Number of Additional QCI5 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI5 E-RAB failed to establish is added to the counter.
Updated
2.2.3.30 C373210283 Number of Additional QCI5 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-65
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI5 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI6 E-RAB.
Sampling Point 4.
Explanation
Updated
2.2.3.32 C373210285 Number of Additional QCI6 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI6 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI6 E-RAB.
Sampling Point 4, 6
2-66
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.2.3.33 C373210286 Number of Additional QCI6 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI6 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.34 C373210287 Number of Additional QCI6 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-67
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.2.3.35 C373210288 Number of Additional QCI6 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI6 E-RAB failed to establish is added to the counter.
Updated
2.2.3.36 C373210289 Number of Additional QCI6 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-68
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI6 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB to Setup List includes QCI7 E-RAB.
Sampling Point 4.
Explanation
Updated
2.2.3.38 C373210291 Number of Additional QCI7 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-69
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI7 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI7 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.39 C373210292 Number of Additional QCI7 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI7 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.40 C373210293 Number of Additional QCI7 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for handover trigger.
2-70
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.41 C373210294 Number of Additional QCI7 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI7 E-RAB failed to establish is added to the counter.
Updated
2-71
SJ-20121224143652-001|20130925(R1.6)
2.2.3.42 C373210295 Number of Additional QCI7 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI7 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI8 E-RAB.
Sampling Point 4.
Explanation
Updated
2-72
SJ-20121224143652-001|20130925(R1.6)
2.2.3.44 C373210297 Number of Additional QCI8 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI8 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI8 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.45 C373210298 Number of Additional QCI8 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI8 E-RAB
failed to establish is added to the counter.
2-73
SJ-20121224143652-001|20130925(R1.6)
Updated
2.2.3.46 C373210299 Number of Additional QCI8 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.47 C373210300 Number of Additional QCI8 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-74
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI8 E-RAB failed to establish is added to the counter.
Updated
2.2.3.48 C373210301 Number of Additional QCI8 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI8 E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes QCI9 E-RAB.
Sampling Point 4.
2-75
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.2.3.50 C373210303 Number of Additional QCI9 SAE Bearers Setup Failures due to
ENB Admission Failure
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for admission failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI9 E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the QCI9 E-RAB.
Sampling Point 4, 6
Explanation
Updated
2.2.3.51 C373210304 Number of Additional QCI9 SAE Bearers Setup Failures due
to Uu Interface Failure
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for RRC reconfiguration complete timeout.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-76
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each QCI9 E-RAB
failed to establish is added to the counter.
Updated
2.2.3.52 C373210305 Number of Additional QCI9 SAE Bearers Setup Failures due
to Handover Trigger
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for handover trigger.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.2.3.53 C373210306 Number of Additional QCI9 SAE Bearers Setup Failures due to
Parameter Error
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for parameter error.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-77
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each QCI9 E-RAB failed to establish is added to the counter.
Updated
2.2.3.54 C373210307 Number of Additional QCI9 SAE Bearers Setup Failures due
to Other Reason
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each QCI9 E-RAB failed to establish is added to the counter.
Updated
2.2.3.55 C373505384 Number of Additional QCI1 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI1 E-RABs failed
to setup for re-establishment.
2-78
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI1
E-RAB.
2.2.3.56 C373505385 Number of Additional QCI2 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI2 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E- RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI2
E-RAB.
2-79
SJ-20121224143652-001|20130925(R1.6)
2.2.3.57 C373505386 Number of Additional QCI3 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI3 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI3
E-RAB.
2.2.3.58 C373505387 Number of Additional QCI4 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI4 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-80
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI4
E-RAB.
2.2.3.59 C373505388 Number of Additional QCI5 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI5 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI5
E-RAB.
2.2.3.60 C373505389 Number of Additional QCI6 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI6 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-81
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI6
E-RAB.
2.2.3.61 C373505390 Number of Additional QCI7 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI7 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI7
E-RAB.
2.2.3.62 C373505391 Number of Additional QCI8 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI8 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
2-82
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI8
E-RAB.
2.2.3.63 C373505392 Number of Additional QCI9 SAE Bearers Setup Failures due to
Receiving RRC Re-establishment Request
Definition
The counter is used to count the number of additional QCI9 E-RABs failed
to setup for re-establishment.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes QCI9
E-RAB.
2-83
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABSetupResponse to the MME, and the
E-RAB Setup List IE includes E-RAB.
Sampling Point 4
Explanation
Updated
2.2.3.65 C373505482 Number of Additional SAE Bearers Setup Failures due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs E-RAB admission failures then replies the
E-RABSetupResponse message to MME, in which the E-RAB Failed to
Setup List includes the E-RAB.
Sampling Point 4
Explanation
Updated
2-84
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
SETUP RESPONSE message to the MME, in which each E-RAB failed to
establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-85
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each E-RAB failed to establish is added to the counter.
Sampling Point 4
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for parameter error, in
which each E-RAB failed to establish is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-86
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the eNodeB
sends the E-RABSetupResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Setup List includes E-RAB.
2.2.3.70 C373505487 Number of Additional SAE Bearers Setup Failures due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each E-RAB failed to establish is added to the counter.
Sampling Point 4
Explanation
When the eNodeB receives the E-RABSetupRequest from the MME, then
replies an E-RAB SETUP RESPONSE message for other reason, in which
each E-RAB failed to establish is added to the counter.
Updated
2-87
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling Point 1: The EUTRAN receives the E-RAB MODIFY REQUEST message
from the MME.
Sampling Point 2: The EUTRAN sends the RRC CONNECTION RECONFIGURATION message to the UE.
Sampling Point 3:
The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
Sampling Point 4: The EUTRAN sends the E-RAB MODIFY RESPONSE message to
the MME, indicating that the E-RAB Modification has been successful or failed.
Sampling Point 5:
The EUTRAN waits for the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE until the timer is timeout,
then the EUTRAN sends the E-RAB MODIFY RESPONSE message to the
MME,indicating that the E-RAB Modification has failed.
Counter
Counter Name
Number
1
C373210308
C373210309
C373210310
C373210311
C373210312
C373210313
2-88
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
7
C373210314
C373210315
C373210316
10
C373210317
11
C373210318
12
C373210319
13
C373210320
14
C373210321
15
C373210322
16
C373210323
17
C373210324
18
C373210325
19
C373210326
20
C373210327
21
C373210328
22
C373210329
23
C373210330
24
C373210331
25
C373210332
26
C373210333
27
C373210334
28
C373210335
29
C373210336
30
C373210337
31
C373210338
32
C373210339
2-89
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
33
C373210340
34
C373210341
35
C373210342
36
C373210343
37
C373210344
38
C373210345
39
C373210346
40
C373210347
41
C373210348
42
C373210349
43
C373210350
44
C373210351
45
C373210352
46
C373210353
47
C373210354
48
C373210355
49
C373210356
50
C373210357
51
C373210358
52
C373210359
53
C373210360
54
C373210361
55
C373505393
56
C373505394
2-90
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
57
C373505395
58
C373505396
59
C373505397
60
C373505398
61
C373505399
62
C373505400
63
C373505401
64
C373505489
65
C373505490
66
C373505491
67
C373505492
68
C373505493
69
C373505494
70
C373505495
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-91
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.3.3.2 C373210309 Number of QCI1 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI1 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI1 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
2-92
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI1 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
2.3.3.4 C373210311 Number of QCI1 SAE Bearers Modification Failure due to Handover
Trigger
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-93
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.6 C373210313 Number of QCI1 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-94
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.8 C373210315 Number of QCI2 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI2 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI2 E-RAB.
Sampling Point 4
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI2 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-96
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.12 C373210319 Number of QCI2 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-97
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.14 C373210321 Number of QCI3 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-98
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI3 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI3 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI3 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
2-99
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-100
SJ-20121224143652-001|20130925(R1.6)
Updated
2.3.3.18 C373210325 Number of QCI3 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
2.3.3.20 C373210327 Number of QCI4 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI4 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI4 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-102
SJ-20121224143652-001|20130925(R1.6)
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI4 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-103
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.3.3.24 C373210331 Number of QCI4 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-104
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.26 C373210333 Number of QCI5 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI5 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI5 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
2-105
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI5 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-106
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.30 C373210337 Number of QCI5 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-107
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.32 C373210339 Number of QCI6 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI6 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI6 E-RAB.
Sampling Point 4
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI6 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-109
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.36 C373210343 Number of QCI6 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-110
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.38 C373210345 Number of QCI7 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-111
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI7 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI7 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI7 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
2-112
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-113
SJ-20121224143652-001|20130925(R1.6)
Updated
2.3.3.42 C373210349 Number of QCI7 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
2.3.3.44 C373210351 Number of QCI8 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI8 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI8 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-115
SJ-20121224143652-001|20130925(R1.6)
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI8 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-116
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.3.3.48 C373210355 Number of QCI8 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-117
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.50 C373210357 Number of QCI9 SAE Bearers Modification Failure due to ENB
Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs QCI9 E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the QCI9 E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
2-118
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each QCI9 E-RAB
failed to modify the QoS parameter is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-119
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.54 C373210361 Number of QCI9 SAE Bearers Modification Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-120
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI1
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-121
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI2
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI3
E-RAB.
2-122
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI4
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-123
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI5
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI6
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-124
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI7
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI8
E-RAB.
2-125
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the E-RABModifyResponse message to the MME due to RRC
re-establishment in which IE E-RAB Failed to Modify List includes QCI9
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB replies the E-RABModifyResponse to the MME, and the
E-RAB Modify List IE includes E-RAB.
Sampling Point 4
Explanation
Updated
2-126
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB occurs E-RAB admission failures then replies the
E-RABModifyResponse message to MME, in which the E-RAB failed to
Modify List includes the E-RAB.
Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The timer expires for an expected RRCConnectionReconfigurationComplete message not received by the eNodeB,the eNodeB sends an E-RAB
MODIFY RESPONSE message to the MME, in which each E-RAB failed
to modify the QoS parameter is added to the counter.
2-127
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-128
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.3.3.70 C373505495 Number of SAE Bearers Modification Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-129
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Point 1: The EUTRAN receives the E-RAB RELEASE COMMAND message
from the MME.
2-130
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
Sampling Point 2: The EUTRAN sends the E-RAB RELEASE RESPONSE message
to the MME, indicating that the E-RAB Release has been successful.
Sampling Point 3: The EUTRAN sends the E-RAB RELEASE INDICATION message
to the MME.
Sampling Point 4: The EUTRAN sends the UE Context ReleaseRequest message to
the MME.
Sampling Point 5: The EUTRAN receives the UE Context ReleaseCommand
message from the MME.
Sampling Point 6: The EUTRAN receives the RESET message from the MME.
Sampling Point 7: The EUTRAN receives the Error Indication message from the MME.
Counter
Counter Name
Number
1
C373210362
C373210363
C373210364
C373210365
C373210366
C373210367
C373210368
C373210369
C373210370
10
C373210371
11
C373210372
12
C373210373
13
C373210374
14
C373210375
15
C373210376
16
C373210377
17
C373210378
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C373210379
19
C373210380
20
C373210381
21
C373210382
22
C373210383
23
C373210384
24
C373210385
25
C373210386
26
C373210387
27
C373210388
28
C373210389
29
C373210390
30
C373210391
31
C373210422
32
C373210423
33
C373210424
34
C373210425
35
C373210426
2-132
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
36
C373210427
37
C373210428
38
C373210429
39
C373210430
40
C373210431
41
C373210432
42
C373210433
43
C373210434
44
C373210435
45
C373210436
46
C373210437
47
C373210438
48
C373210439
49
C373210440
50
C373210441
51
C373210442
52
C373210443
53
C373210444
2-133
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
54
C373210445
55
C373210446
56
C373210447
57
C373210448
58
C373210449
59
C373210450
60
C373210451
61
C373210492
62
C373210493
63
C373210494
64
C373210495
65
C373210496
66
C373210497
67
C373210498
68
C373210499
69
C373210500
70
C373210501
71
C373210502
2-134
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
72
C373210503
73
C373210504
74
C373210505
75
C373210506
76
C373210507
77
C373210508
78
C373210509
79
C373210510
80
C373210511
81
C373210512
82
C373210513
83
C373210514
84
C373210515
85
C373210516
86
C373210517
87
C373210518
88
C373210519
89
C373210520
2-135
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
90
C373210521
91
C373210522
92
C373210523
93
C373210524
94
C373210525
95
C373210526
96
C373210527
97
C373210528
98
C373210529
99
C373210530
100
C373210531
101
C373505309
102
C373505310
103
C373505311
104
C373505312
105
C373505313
106
C373505314
107
C373505315
108
C373505316
109
C373505317
110
C373505318
111
C373505319
112
C373505320
2-136
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
113
C373505321
114
C373505322
115
C373505323
116
C373505324
117
C373505325
118
C373505326
119
C373505345
120
C373505346
121
C373505347
122
C373505348
123
C373505349
124
C373505350
125
C373505351
126
C373505352
127
C373505353
128
C373505354
129
C373505355
130
C373505356
131
C373505357
132
C373505358
2-137
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
133
C373505359
134
C373505360
135
C373505361
136
C373505362
137
C373505363
138
C373505364
139
C373505452
140
C373505453
141
C373505454
142
C373505455
143
C373505456
144
C373505457
145
C373505458
146
C373505459
147
C373505460
148
C373505461
149
C373505462
150
C373505463
151
C373505464
152
C373505465
153
C373505466
154
C373505467
155
C373505468
156
C373505469
157
C373505470
158
C373505471
159
C373505496
2-138
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
160
C373505497
161
C373505499
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI1 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-139
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI2 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-140
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI3 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI4 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-141
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI5 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-142
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI6 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI7 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-143
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI8 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-144
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies the
E-RAB RELEASE RESPONSE message to MME, and in which IE E-RAB
To Be Released List includes the QCI9 E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RABReleaseCommand message from MME then replies
the E-RAB RELEASE RESPONSE message to MME, and in which IE
E-RAB To Be Released List includes the E-RAB. Or When the eNodeB
receives the UEContextReleaseCommand message from the MME.
2.4.3.11 C373210372 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-145
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI1 E-RAB.
2.4.3.12 C373210373 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI2 E-RAB.
2.4.3.13 C373210374 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI3 E-RAB.
2.4.3.14 C373210375 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI4 E-RAB.
2-147
SJ-20121224143652-001|20130925(R1.6)
2.4.3.15 C373210376 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI5 E-RAB.
2.4.3.16 C373210377 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-148
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI6 E-RAB.
2.4.3.17 C373210378 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI7 E-RAB.
2.4.3.18 C373210379 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-149
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI8 E-RAB.
2.4.3.19 C373210380 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Overload Control
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when eNodeB sends
the E-RAB RELEASE INDICATION message or UE Context Release
Request to the MME due to LoadControl,and the E-RAB released List
includes the QCI9 E-RAB.
Sampling Interval
Event triggered
2-150
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when eNodeB sends the
E-RAB RELEASE INDICATION message or UE Context Release Request
to the MME due to LoadControl.
2.4.3.21 C373210382 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI1 E-RAB.
2.4.3.22 C373210383 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
2-151
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI2 E-RAB.
2.4.3.23 C373210384 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI3 E-RAB.
2-152
SJ-20121224143652-001|20130925(R1.6)
2.4.3.24 C373210385 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI4 E-RAB.
2.4.3.25 C373210386 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI5 E-RAB.
2-153
SJ-20121224143652-001|20130925(R1.6)
2.4.3.26 C373210387 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI6 E-RAB.
2.4.3.27 C373210388 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI7 E-RAB.
2-154
SJ-20121224143652-001|20130925(R1.6)
2.4.3.28 C373210389 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI8 E-RAB.
2.4.3.29 C373210390 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Other Abnormal Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other
reason,and the E-RAB To Be Released List includes the QCI9 E-RAB.
2-155
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to other reason.
2.4.3.31 C373210422 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-156
SJ-20121224143652-001|20130925(R1.6)
2.4.3.32 C373210423 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.33 C373210424 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-157
SJ-20121224143652-001|20130925(R1.6)
2.4.3.34 C373210425 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.35 C373210426 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-158
SJ-20121224143652-001|20130925(R1.6)
2.4.3.36 C373210427 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.37 C373210428 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-159
SJ-20121224143652-001|20130925(R1.6)
2.4.3.38 C373210429 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.39 C373210430 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to HO Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-160
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.41 C373210432 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-161
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures, and the E-RAB To Be Released List includes the QCI1 E-RAB.
2.4.3.42 C373210433 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI2 E-RAB.
2.4.3.43 C373210434 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-162
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI3 E-RAB.
2.4.3.44 C373210435 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI4 E-RAB.
2-163
SJ-20121224143652-001|20130925(R1.6)
2.4.3.45 C373210436 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI5 E-RAB.
2.4.3.46 C373210437 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-164
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI6 E-RAB.
2.4.3.47 C373210438 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI7 E-RAB.
2-165
SJ-20121224143652-001|20130925(R1.6)
2.4.3.48 C373210439 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI8 E-RAB.
2.4.3.49 C373210440 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Radio Link Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-166
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseIndication message to MME due to radio link
failures,and the E-RAB To Be Released List includes the QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the E-RABReleaseIndication message to MME due to radio link failures.
2.4.3.51 C373210442 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI1 E-RAB.
2.4.3.52 C373210443 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI2 E-RAB.
2-168
SJ-20121224143652-001|20130925(R1.6)
2.4.3.53 C373210444 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI3 E-RAB.
2.4.3.54 C373210445 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI4 E-RAB.
2.4.3.55 C373210446 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI5 E-RAB.
2.4.3.56 C373210447 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-170
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI6 E-RAB.
2.4.3.57 C373210448 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI7 E-RAB.
2-171
SJ-20121224143652-001|20130925(R1.6)
2.4.3.58 C373210449 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI8 E-RAB.
2.4.3.59 C373210450 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Reestablish Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to RRC
connection reestablishment failures,and the UE has the QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UeContextReleaseRequest message to MME due to RRC connection
reestablishment failures.
2.4.3.61 C373210492 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-173
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI1 E-RAB.
2.4.3.62 C373210493 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI2 E-RAB.
2.4.3.63 C373210494 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-174
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI3 E-RAB.
2.4.3.64 C373210495 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI4 E-RAB.
2.4.3.65 C373210496 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-175
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI5 E-RAB.
2.4.3.66 C373210497 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI6 E-RAB.
2.4.3.67 C373210498 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
2-176
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI7 E-RAB.
2.4.3.68 C373210499 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI8 E-RAB.
2-177
SJ-20121224143652-001|20130925(R1.6)
2.4.3.69 C373210500 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to UserInactive
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to user
inactive,and the UE has QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UeContextReleaseRequest message to MME due to user inactive.
Sampling Point 4
Explanation
Updated
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UeContextReleaseRequest message to MME due to user inactive.
2-178
SJ-20121224143652-001|20130925(R1.6)
2.4.3.71 C373210502 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI1 E-RAB.
2.4.3.72 C373210503 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI2 E-RAB.
2-179
SJ-20121224143652-001|20130925(R1.6)
2.4.3.73 C373210504 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm that trigger UE release.
Each above two conditions QCI3 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI3 E-RAB.
2.4.3.74 C373210505 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI4 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI4 E-RAB.
2-180
SJ-20121224143652-001|20130925(R1.6)
2.4.3.75 C373210506 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI5 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI5 E-RAB.
2.4.3.76 C373210507 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI6 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI6 E-RAB.
2-181
SJ-20121224143652-001|20130925(R1.6)
2.4.3.77 C373210508 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI7 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI7 E-RAB.
2.4.3.78 C373210509 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI8 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI8 E-RAB.
2-182
SJ-20121224143652-001|20130925(R1.6)
2.4.3.79 C373210510 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Cell Block or Reset
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions QCI9 E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to cell block
or reset,and the UE has QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UeContextReleaseRequest message to MME due to cell block or reset.
Sampling Point 4
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm about cell that trigger UE release.
Each above two conditions E-RAB released is added to the counter.
Updated
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UeContextReleaseRequest message to MME due to cell block or reset.
2-183
SJ-20121224143652-001|20130925(R1.6)
2.4.3.81 C373210512 Number of QCI1 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI1 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
Updated
2.4.3.82 C373210513 Number of QCI2 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
2-184
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter is used to count the number of QCI2 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2.4.3.83 C373210514 Number of QCI3 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI3 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2-185
SJ-20121224143652-001|20130925(R1.6)
2.4.3.84 C373210515 Number of QCI4 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI4 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2.4.3.85 C373210516 Number of QCI5 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
2-186
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter is used to count the number of QCI5 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2.4.3.86 C373210517 Number of QCI6 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI6 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2-187
SJ-20121224143652-001|20130925(R1.6)
2.4.3.87 C373210518 Number of QCI7 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI7 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2.4.3.88 C373210519 Number of QCI8 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
2-188
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter is used to count the number of QCI8 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2.4.3.89 C373210520 Number of QCI9 E-RAB Release by MME due to Error Indication
or Reestablish Inter eNB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
The counter is used to count the number of QCI9 E-RABs Release initiated
by MME due to the following two conditions.
The eNodeB receives the UEContextReleaseCommand message from
MME, in which the Cause is "Failure in the Radio Interface Procedure",
then release the UE Context.
The eNodeB receives the ErrorIndication message from the MME, then
release the UE Context.
.
Updated
2-189
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 5, Sampling Point 7
Explanation
Updated
2.4.3.91 C373210522 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-190
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
2.4.3.92 C373210523 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.93 C373210524 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-191
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.4.3.94 C373210525 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.95 C373210526 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-192
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.96 C373210527 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.97 C373210528 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
2-193
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.98 C373210529 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-194
SJ-20121224143652-001|20130925(R1.6)
2.4.3.99 C373210530 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to Redirection
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the UeContextReleaseRequest message to MME due to redirection.
2-195
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI1 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI1 E-RAB.
The counter is used to count the number of QCI2 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI2 E-RAB.
The counter is used to count the number of QCI3 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-196
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI3 E-RAB.
The counter is used to count the number of QCI4 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI4 E-RAB.
The counter is used to count the number of QCI5 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-197
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI5 E-RAB.
The counter is used to count the number of QCI6 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI6 E-RAB.
The counter is used to count the number of QCI7 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI7 E-RAB.
2-198
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI8 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI8 E-RAB.
The counter is used to count the number of QCI9 E-RABs failed to release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-199
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI1 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI2 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-200
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI3 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RABs attempted to release includes the QCI4 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-201
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI5 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI6 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-202
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI7 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI8 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-203
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the QCI9 E-RAB.
2.4.3.119 C373505345 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.120 C373505346 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-204
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI2 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.121 C373505347 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI3 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2-205
SJ-20121224143652-001|20130925(R1.6)
2.4.3.122 C373505348 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI4 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.123 C373505349 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
2-206
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every QCI5 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.124 C373505350 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI6 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.125 C373505351 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-207
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every QCI7 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.126 C373505352 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI8 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
2.4.3.127 C373505353 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to S1 Link Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-208
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI9 E-RAB When the eNodeB
sends the UE Context ReleaseRequest message to the MME due to S1
link fault.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB When the eNodeB sends
the UE Context ReleaseRequest message to the MME due to S1 link fault.
2.4.3.129 C373505355 Number of QCI1 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
2-209
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.130 C373505356 Number of QCI2 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI2 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.131 C373505357 Number of QCI3 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-210
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI3 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.132 C373505358 Number of QCI4 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI4 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.133 C373505359 Number of QCI5 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-211
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every QCI5 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.134 C373505360 Number of QCI6 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI6 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.135 C373505361 Number of QCI7 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI7 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2-212
SJ-20121224143652-001|20130925(R1.6)
2.4.3.136 C373505362 Number of QCI8 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI8 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2.4.3.137 C373505363 Number of QCI9 E-RAB Release by ENB Through E-RAB Release
Procedure due to CCO Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI9 E-RAB when the eNodeB
sends the UE Context ReleaseRequest message to the MME due to CCO.
2-213
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB when the eNodeB sends
the UE Context ReleaseRequest message to the MME due to CCO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI1 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI2 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI3 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-215
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI4 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI5 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-216
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI6 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI7 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-217
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI8 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every QCI9 E-RAB When the eNodeB
sends the UE ContextReleaseRequest message to the MME due to Radio
Connection With UE Lost.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-218
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
2.4.3.149 C373505462 Number of QCI1 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.150 C373505463 Number of QCI2 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-219
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.151 C373505464 Number of QCI3 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.152 C373505465 Number of QCI4 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
2-220
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.153 C373505466 Number of QCI5 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.154 C373505467 Number of QCI6 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
2-221
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.155 C373505468 Number of QCI7 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.156 C373505469 Number of QCI8 E-RAB Release by MME due to Other Reason
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2.4.3.157 C373505470 Number of QCI9 E-RAB Release by MME due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-223
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
receives the E-RAB RELEASE COMMAND message from the MME in
which IE:E-RAB To Be Released List includes the E-RAB.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the eNodeB
sends the E-RABReleaseReponse message to the MME, and IE E-RABs
Failed to Release List include the E-RAB.
The counter is used to count the number of released E-RABs that were
active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
E-RAB is added to the counter.
Updated
2-225
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373210452
C373210453
C373210454
C373210455
C373210456
C373210457
C373210458
C373210459
C373210460
10
C373210461
11
C373210462
12
C373210463
13
C373210464
14
C373210465
15
C373210466
16
C373210467
17
C373210468
18
C373210469
19
C373210470
20
C373210471
21
C373210472
22
C373210473
23
C373210474
24
C373210475
25
C373210476
26
C373210477
27
C373210478
28
C373210479
29
C373210480
30
C373210481
31
C373210482
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
32
C373210483
33
C373210484
34
C373210485
35
C373210486
36
C373210487
37
C373210488
38
C373210489
39
C373210490
40
C373210491
41
C373546248
42
C373546249
43
C373546250
44
C373546251
45
C373546252
46
C373546253
47
C373546254
48
C373546255
49
C373546256
50
C373546257
51
C373546258
52
C373546259
53
C373546260
54
C373546261
55
C373546262
56
C373546263
57
C373546264
58
C373546265
59
C373546266
60
C373546267
2-227
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI1 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI1 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI2 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI2 E-RAB.
2-228
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI3 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI3 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI4 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI4 E-RAB.
2-229
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI5 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI5 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI6 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI6 E-RAB.
2-230
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI7 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI7 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI8 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI8 E-RAB.
2-231
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete and the UE has QCI9 E-RAB.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the target
eNodeB sends the HandoverNotify message to the MME or sends the
UeContextRelease message to the source eNodeB indicating handover
complete and the UE has QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverNotify message to the MME
or sends the UeContextRelease message to the source eNodeB indicating
handover complete.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI1 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI2 E-RAB.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI3 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI4 E-RAB.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI5 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI6 E-RAB.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI7 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI8 E-RAB.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete and the UE has QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the source
eNodeB receives the UEContextReleaseCommand message from the
MME or receives the UEContextRelease message from the target eNodeB
indicating handover complete.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-237
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI1
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI2
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-238
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI3
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI4
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-239
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI5
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI6
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-240
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI7
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI8
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
2-241
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB and in which IE E-RABs To Be Setup List includes QCI9
E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every E-RAB When the target eNodeB
receives HANDOVER REQUEST message from the MME or source
eNodeB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI1 E-RAB for handover admission failures is added to the counter.
2-242
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI1 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI2 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI2 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI3 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI3 E-RAB admission failure.
2-243
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI4 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI4 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI5 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI5 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-244
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Each QCI6 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI6 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Each QCI7 E-RAB for handover admission failures is added to the counter.
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI7 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI8 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI8 E-RAB admission failure.
2-245
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Each QCI9 E-RAB for handover admission failures is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs QCI9 E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB When the target
eNodeB receives HANDOVER REQUEST message from the MME or
source eNodeB then occurs E-RAB admission failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
2-246
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI1 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI2 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI3 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI4 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI5 E-RAB.
2-248
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI6 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI7 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-249
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI8 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell and the UE has QCI9 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
2-250
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
receives the RRC CONNECTION REESTABLISHMENT COMPLETE from
the UE in other cell.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI1 E-RAB.
Explanation
Each QCI1 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI1 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI2 E-RAB.
Explanation
Each QCI2 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI2 E-RAB.
2-251
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI3 E-RAB.
Explanation
Each QCI3 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI3 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI4 E-RAB.
Explanation
Each QCI4 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI4 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-252
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI5 E-RAB.
Explanation
Each QCI5 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI5 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI6 E-RAB.
Explanation
Each QCI6 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI6 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI7 E-RAB.
2-253
SJ-20121224143652-001|20130925(R1.6)
Explanation
Each QCI7 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI7 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI8 E-RAB.
Explanation
Each QCI8 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI8 E-RAB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell and the UE has QCI9 E-RAB.
Explanation
Each QCI9 E-RAB for successful outgoing re-establishment from local cell
to other cell is added to the counter.
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell and the UE has QCI9 E-RAB.
2-254
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the local cell trigger the UE release for RRC CONNECTION
REESTABLISHMENT to other cell.
Explanation
Updated
The counter is incremented by 1 for every this E-RAB when the local cell
trigger the UE release for RRC CONNECTION REESTABLISHMENT to
other cell.
Counter
Counter Name
Number
1
C373505300
C373505301
C373505302
C373505303
C373505304
C373505305
C373505306
C373505307
C373505308
10
C373505402
2-255
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
11
C373505403
12
C373505404
13
C373505405
14
C373505406
15
C373505407
16
C373505408
17
C373505409
18
C373505410
19
C373505411
20
C373505498
The counter is used to count the number of released QCI1 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI1 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI1 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI2 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
2-256
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI2 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI2 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI3 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI3 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI3 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI4 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI4 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI4 E-RAB is added to the counter.
2-257
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of released QCI5 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI5 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI5 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI6 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI6 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI6 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI7 E-RABs that
were active at the time of release.
2-258
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI7 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI7 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI8 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI8 E-RAB with data in a buffer that was abnormally released.
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI8 E-RAB is added to the counter.
Updated
The counter is used to count the number of released QCI9 E-RABs that
were active at the time of release.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When a QCI9 E-RAB with data in a buffer that was abnormally released.
2-259
SJ-20121224143652-001|20130925(R1.6)
Explanation
The abnormally released E-RABs that were active at the time of release.
i.e.when there was user data in the queue in any of the directions. Each
QCI9 E-RAB is added to the counter.
Updated
The counter is used to count the aggregated active session time for UEs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When UE data on any Data Radio Bearer (UL or DL) has been transferred
during each sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI1
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI1 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the aggregated active session time for QCI2
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI2 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI3
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI3 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI4
E-RABs.
2-261
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI4 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI5
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI5 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI6
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
2-262
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When QCI6 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI7
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI7 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for QCI8
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI8 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
2-263
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the aggregated active session time for QCI9
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When QCI9 E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
Updated
The counter is used to count the aggregated active session time for
E-RABs.
Sampling Interval
100 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When E-RAB data on any Data Radio Bearer (UL or DL) has been
transferred at sampling point.
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Counter
Counter Name
Number
1
C373240800
C373240801
C373240802
C373240803
C373240804
C373240805
C373240806
C373240807
C373240808
10
C373240809
11
C373240810
12
C373240811
13
C373240812
14
C373240813
15
C373240814
16
C373240815
17
C373240816
18
C373240817
19
C373240818
20
C373240819
21
C373240820
22
C373240821
2-265
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
23
C373240822
24
C373240823
25
C373240824
26
C373240825
27
C373240826
28
C373240827
29
C373240828
30
C373240829
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
2-266
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
2-267
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
2-268
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-270
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
2-271
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
2-272
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
2-273
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the QCI1 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI2 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI3 E-RAB
number in sampling point is larger than the counter.
2-275
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI4 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI5 E-RAB
number in sampling point is larger than the counter.
2-276
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI6 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI7 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
2-277
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI8 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the QCI9 E-RAB
number in sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
2-278
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
10 s
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the E-RAB number at
sampling point is larger than the counter.
2-279
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling Point 1: The eNodeB records the start time when it receives the
InitialContextSetupRequest message from MME.
Sampling Point 2: The eNodeB records the end time when it sends the InitialContextSetupResponse message to MME.
Sampling Point 3: The eNodeB records the start time when it receives the
ERABSetupRequest message from MME.
2-280
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 4: The eNodeB records the end time when it sends the
ERABSetupResponse message to MME.
Counter
Counter Name
Number
1
C373505327
C373505328
C373505329
C373505330
C373505331
C373505332
C373505333
C373505334
C373505335
10
C373505336
11
C373505337
12
C373505338
13
C373505339
14
C373505340
15
C373505341
16
C373505342
17
C373505343
18
C373505344
The counter is used to count the mean time it takes to establish an QCI1
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
2-281
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI1
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI1 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI2
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI2
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI2 E-RAB setup time
among sampling points.
2-282
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the mean time it takes to establish an QCI3
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI3
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI3 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI4
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
2-283
SJ-20121224143652-001|20130925(R1.6)
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI4
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI4 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI5
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI5
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI5 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI6
E-RAB.
Sampling Interval
10 s
2-284
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI6
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI6 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI7
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI7
E-RABs in the granularity period to give the arithmetic mean.
2-285
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is updated by the arithmetic mean of QCI7 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI8
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI8
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI8 E-RAB setup time
among sampling points.
The counter is used to count the mean time it takes to establish an QCI9
E-RAB.
Sampling Interval
10 s
Counter Type
Average
Unit
ms
Measurement Object
Cell
2-286
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. The end value of this
time will then be divided by the number of successfully established QCI9
E-RABs in the granularity period to give the arithmetic mean.
Updated
The counter is updated by the arithmetic mean of QCI9 E-RAB setup time
among sampling points.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI1 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI1 ERAB setup
time at sampling point is larger than the counter.
2-287
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI2 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI2 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
2-288
SJ-20121224143652-001|20130925(R1.6)
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI3 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI3 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI4 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI4 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
2-289
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI5 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI5 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI6 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI6 ERAB setup
time at sampling point is larger than the counter.
2-290
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI7 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI7 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
2-291
SJ-20121224143652-001|20130925(R1.6)
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI8 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI8 ERAB setup
time at sampling point is larger than the counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The E-RAB setup time is the time intervals for every successfully
established E-RAB between the receipt of an E-RAB SETUP REQUEST
or INITIAL CONTEXT SETUP REQUEST message and the transmission
of the corresponding E-RAB SETUP RESPONSE or INITIAL CONTEXT
SETUP RESPONSE message by the eNodeB. the counter is the largest
about QCI9 E-RAB in the granularity period.
Updated
The counter is replaced with the current value when QCI9 ERAB setup
time at sampling point is larger than the counter.
2-292
SJ-20121224143652-001|20130925(R1.6)
Chapter 3
Statistics of UE Context
Table of Contents
UE Context Setup ......................................................................................................3-2
UE Context Modification .............................................................................................3-8
UE Context Release.................................................................................................3-11
UE Context for CSFB ...............................................................................................3-19
Security Mode ..........................................................................................................3-22
3-1
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
Sampling Point 1: The EUTRAN receives the INITIAL CONTEXT SETUP REQUEST
message from the MME.
Sampling Point 2:
The EUTRAN sends the RRC CONNECTION
RECONFIGURATION message to the UE.
Sampling Point 3:
The EUTRAN receives the RRC CONNECTION
RECONFIGURATION COMPLETE message from the UE.
Sampling Point 4: The EUTRAN sends the INITIAL CONTEXT SETUP RESPONSE
message to the MME, indicating that the E-RAB Establishment has been set up
successfully.
Sampling
Point
5:
The
EUTRAN
does
not
receive
the
RRCConnectionReconfigurationComplete message from the UE, and the timer
3-2
SJ-20121224143652-001|20130925(R1.6)
l
l
l
expires. Then EUTRAN sends the INITIAL CONTEXT SETUP FAILURE message
to the MME.
Sampling Point 6: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of not UE context.
Sampling Point 7: The EUTRAN sends the INITIAL CONTEXT SETUP FAILURE
message to the MME because of AS failure.
Sampling Point 8:
The EUTRAN receives the RRC CONNECTION
REESTABLISHMENT REQUEST message from the UE.
Counter
Counter Name
Number
1
C373220600
C373220601
C373220602
C373220603
C373220604
C373220605
Number of Context Setup Failure due to Context Setup Request Msg Error
C373220606
C373220623
C373220636
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
3-3
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
3.1.3.2 C373220601 Number of Context Setup Failure due to Active Failure in Security
Mode
Definition
The counter is used to count the number of UE Context failed to setup for
security activation failures.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
3.1.3.3 C373220602 Number of Context Setup Failure due to Admission Control Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
3-4
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
3.1.3.4 C373220603 Number of Context Setup Failure due to RRC ReConf Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
3-5
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
3.1.3.6 C373220605 Number of Context Setup Failure due to Context Setup Request
Msg Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
3-6
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
3.1.3.8 C373220623 Number of Context Setup Failure due to Message not Compatible
with eNodeb State
Definition
The counter is used to count the number of UE Context failed to setup for
message not compatible with receiver state.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the INITIAL CONTEXT SETUP failure message
due to message not compatible with receiver state.
Sampling Point 6
Explanation
The eNodeB's state is not the UE context setup when receiving the INITIAL
CONTEXT SETUP REQUEST message from the MME.Then the eNodeB
reply the INITIAL CONTEXT SETUP failure message to the MME.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Counter
Counter Name
Number
1
C373220607
3-8
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
2
C373220608
C373220609
C373220610
C373220632
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
3.2.3.2 C373220608 Number of Context Modify Failure due to ENB Admission Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
3-9
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
3.2.3.3 C373220609 Number of Context Modify Failure due to Msg Param Error
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
3-10
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
3-11
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
Counter
Counter Name
Number
1
C373220611
C373220612
C373220613
C373220614
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
5
C373220615
C373220616
C373220617
C373220618
C373220620
10
C373220621
11
C373220622
12
C373220624
13
C373220635
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
3-13
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
3.3.3.4 C373220614 Number of Context Release by ENB due to Cell Block or Reset
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB receives the Cell Block Command from the OMM for manual
operation.
The eNodeB occurs alarm that trigger UE release.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
3-15
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME.
When the eNodeB receives the UEContextReleaseCommand message
from the MME and the Cause in the message is "Failure in the Radio
Interface Procedure".
Sampling Point 1, Sampling Point 4
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
3-16
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB will trigger UE release after sending the RRCConnectionReestablishmentReject message to UE.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
3-17
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
3-18
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Counter
Counter Name
Number
1
C373220653
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
2
C373220654
C373220655
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
After the LTE user sends the service request message to MME for neither
mt nor mo type, the MME find the eNodeB not supportting CS service.Then
the MME requires eNodeB to establish the UE Context which indicates CS
service fallback to GERAN/UTRAN. The counter calculates the number
of this UE Context setup attempts.
Updated
3.4.3.2 C373220654 Number of Successful Other Initial Context Setup with CSFB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
3-20
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
After the LTE user sends the service request message to MME for neither
mt nor mo type, the MME requires eNodeB to establish the UE Context
which indicates CS service fallback to GERAN/UTRAN. The counter
calculates the number of this UE Context successful setup.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
After the LTE user sends the service request message to MME for neither
mt nor mo type, the MME requires eNodeB to establish the UE Context
which indicates CS service fallback to GERAN/UTRAN. The eNodeB
indicates the UE accessing to the target GERAN/UTRAN cell through
the PS HO/CCO/Redirection. The counter calculates the number of this
UE Context release.
Updated
3-21
SJ-20121224143652-001|20130925(R1.6)
l
l
l
Counter
Counter Name
Number
1
C373220630
C373220631
Sampling Interval
Event triggered
3-22
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB receives the SecurityModefailure message from the UE.
Sampling Point 3
Explanation
Updated
3-23
SJ-20121224143652-001|20130925(R1.6)
3-24
SJ-20121224143652-001|20130925(R1.6)
Chapter 4
Statistics of
S1/X2-connection
Table of Contents
UE-associated Logical S1-connection ........................................................................4-1
S1 Error Indication......................................................................................................4-3
l
l
Counter
Counter Name
Number
1
C373495200
C373495201
4-1
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
4.1.3.2 C373495201 Number of Received First Message by ENB after Init UE Message
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB receives the first signal message from MME after
sending the InitialUEMessage.
Sampling Point 2
Explanation
Updated
4-2
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling Point 1: The eNodeB sends the ErrorIndication Message to the MME.
Sampling Point 2: The eNodeB receives the ErrorIndication message from the MME.
Counter
Counter Name
Number
1
C373960440
C373960441
C373960442
C373960443
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
4-3
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the ErrorIndication message to the MME due to
parameter error.
Sampling Point 1
Explanation
After the eNodeB receive the message from the MME, it check the
parameter failed. Then the eNodeB sends the ErrorIndication message
to the MME.
Updated
When the eNodeB sends the ErrorIndication message to the MME due to
parameter error,the counter is incremented by 1.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the ErrorIndication message to the MME due
to other reason.
Sampling Point 1
Explanation
After the eNodeB receive the message from the MME, it occur other failed.
Then the eNodeB sends the ErrorIndication message to the MME.
Updated
When the eNodeB sends the ErrorIndication message to the MME due to
other reason,the counter is incremented by 1.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME
due to parameter error.
Sampling Point 2
4-4
SJ-20121224143652-001|20130925(R1.6)
Explanation
After the MME receive the message from the eNodeB, it check the
parameter failed. Then the MME sends the ErrorIndication message to
the eNodeB.
Updated
When the eNodeB receives the ErrorIndication message from the MME
due to parameter error,the counter is incremented by 1.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the ErrorIndication message from the MME
due to other reason.
Sampling Point 2
Explanation
After the MME receive the message from the eNodeB, it occur other failed.
Then the MME sends the ErrorIndication message to the eNodeB.
Updated
When the eNodeB receives the ErrorIndication message from the MME
due to other reason,the counter is incremented by 1.
4-5
SJ-20121224143652-001|20130925(R1.6)
4-6
SJ-20121224143652-001|20130925(R1.6)
Chapter 5
Statistics of SON
Table of Contents
MRO ..........................................................................................................................5-1
RACH.......................................................................................................................5-11
PCI...........................................................................................................................5-18
X2 Self Configuration ...............................................................................................5-49
5.1 MRO
5.1.1 Flow Charts and Sampling Points
MRO refers to that handover fault and unnecessary handover detection and optimize.
The statistics of MRO includes handover too late, handover too early and handover in error
cell.
Counter
Counter Name
Number
1
C373474911
C373474912
C373474913
C373474914
C373474915
C373474916
C373474917
C373474918
C373474919
10
C373723000
11
C373723001
12
C373723002
13
C373723003
14
C373723004
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
15
C373723005
16
C373723006
17
C373723007
18
C373723008
19
C373723009
20
C373723011
21
C373723012
The counter is used to count the number of handover too early during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too late after
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
5-2
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too early before
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too late during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
5-3
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of handover too wrong cell during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too wrong cell after
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of coverage hole between cell.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB detects the PCI of the neighbour cell without
configuration.
5-5
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB detects the PCI of the neighbour cell without
configuration,it is added to the counter.
Updated
When the eNodeB detects the PCI of the neighbour cell without
configuration,the counter is incremented by 1.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
5-6
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
The counter is used to count the number of handover executions that fail
related with Ping-Pong.
Sampling Interval
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the UE occurs handover from source cell to target cell, then occurs
handover back to source cell within the threshold of time successfully.
Explanation
When the UE occurs handover from source cell to target cell, then occurs
handover back to source cell within the threshold of time successfully,
it is added to the counter.
Updated
When the UE occurs handover from source cell to target cell, then occurs
handover back to source cell within the threshold of time successfully, the
counter is incremented by 1.
The counter is used to count the number of handover too early during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
5-7
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too late after
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too late before
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
5-8
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of handover too late during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
The counter is used to count the number of handover too wrong cell during
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
5-9
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of handover too wrong cell after
handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
The counter is used to count the number of coverage hole between cell.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
5-10
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB detects the PCI of the neighbour cell without
configuration.
Explanation
When the eNodeB detects the PCI of the neighbour cell without
configuration,it is added to the counter.
Updated
When the eNodeB detects the PCI of the neighbour cell without
configuration,the counter is incremented by 1.
5.2 RACH
5.2.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373444757
C373444758
C373444761
C373444762
C373474902
C373474903
C373474904
C373474905
C373474906
10
C373474907
11
C373474908
12
C373474909
13
C373474927
14
C373474928
5-11
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
5-12
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When all dedicated RACH preambles are assigned to UEs during handover
procedure.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-14
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-15
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
5.3 PCI
5.3.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373474900
C373474901
C373474920
C373474921
C373474922
C373474923
C373474924
C373474925
C373474942
10
C373474943
11
C373474944
12
C373474945
13
C373474946
14
C373474947
15
C373474948
16
C373474949
17
C373474950
18
C373474951
19
C373474952
5-18
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
20
C373474953
21
C373474954
22
C373474955
23
C373474956
24
C373474957
25
C373474958
26
C373474959
27
C373474960
28
C373474961
29
C373474962
30
C373474963
31
C373474964
32
C373474965
33
C373474966
34
C373474967
Number of Failed Handover to Temp Neighbor Cell between LTE and UTRAN
35
C373474968
36
C373474969
37
C373474970
38
C373474971
39
C373474972
Number of Failed Handover to Temp Neighbor Cell between LTE and CDMA
40
C373474973
41
C373474974
42
C373474975
5-19
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
43
C373474976
44
C373474977
Number of Failed Handover to Temp Neighbor Cell between LTE and GSM
45
C373474978
46
C373474979
47
C373474980
48
C373474981
49
C373474982
50
C373474983
51
C373474984
52
C373474985
53
C373474986
54
C373474987
55
C373474988
56
C373474989
57
C373474990
58
C373474991
59
C373692700
60
C373692701
61
C373692702
62
C373692703
63
C373692704
64
C373723013
65
C373723014
5-20
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the service cell PCI same
to the neighbour cell.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell.
Explanation
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell, it is added to the counter.
Updated
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell, the counter is incremented by 1.
The counter is used to count the number of detecting the two neighbour
cells PCI being the same.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB detects that the two neighbours' PCI is the same.
Explanation
When the eNodeB detects that the two neighbours' PCI is the same, it is
added to the counter.
Updated
When the eNodeB detects that the two neighbours' PCI is the same,the
counter is incremented by 1.
The counter is used to count the number of different PCIs intra RAT.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
5-21
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of unknown PCI reports intra RAT.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
5-22
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.8 C373474925 Number of Report Neighbor Relation Addition to OMC intra RAT
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.9 C373474942 Number of Different Detect Cell between LTE and UTRAN
Definition
The counter is used to count the number of different PCIs between LTE
and UTRAN.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different UTRAN
unknown PCIs are detected.
5.3.3.10 C373474943 Number of Report Detect Cell between LTE and UTRAN
Definition
The counter is used to count the number of unknown PCI reports between
LTE and UTRAN.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of CGI between EUTRAN and
UTRAN.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-25
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.15 C373474948 Number of Different Detect Cell between LTE and CDMA
Definition
The counter is used to count the number of different PCIs between LTE
and CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
5-26
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different CDMA
unknown PCIs are detected.
5.3.3.16 C373474949 Number of Report Detect Cell between LTE and CDMA
Definition
The counter is used to count the number of unknown PCI reports between
LTE and CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of CGI to UE between LTE and
CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
5-27
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the number of CGI between LTE and CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-28
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.21 C373474954 Number of Different Detect Cell between LTE and GSM
Definition
The counter is used to count the number of different PCIs between LTE
and GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by PCI number when the eNodeB receives the
MeasurementReport message from the UE in which the different GSM
unknown PCIs are detected.
5.3.3.22 C373474955 Number of Report Detect Cell between LTE and GSM
Definition
The counter is used to count the number of unknown PCI reports between
LTE and GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
5-29
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of CGI to UE between LTE and
GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of CGI between LTE and GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-31
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation of LTE cell to the OMC, and
the neighbor relation added successful.
Explanation
When the eNodeB reported neighbor relation of LTE cell to the OMC, and
the neighbor relation added successful, it is added to the counter.
Updated
5.3.3.28 C373474961 Number of Successful Handover to Temp Neighbor Cell Intra RAT
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.29 C373474962 Number of Failed Handover to Temp Neighbor Cell Intra RAT
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
5-32
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
5.3.3.30 C373474963 Number of Report Neighbor Relation Deletion to OMC Intra RAT
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.31 C373474964 Number of Successfully Deleted Official Neighbor Cell Intra RAT
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation deletion of LTE cell to the
OMC, and the neighbor relation deleted successful.
Explanation
When the eNodeB reported neighbor relation deletion of LTE cell to the
OMC,and the neighbor relation deleted successful, it is added to the
counter.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation of UTRAN cell to the OMC,
and the neighbor relation added successful.
Explanation
When the eNodeB reported neighbor relation of UTRAN cell to the OMC,
and the neighbor relation added successful,it is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5.3.3.34 C373474967 Number of Failed Handover to Temp Neighbor Cell between LTE
and UTRAN
Definition
Sampling Interval
Event triggered
5-34
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation deletion of UTRAN cell to the
OMC,and the neighbor relation deleted successful.
5-35
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation of CDMA cell to the OMC,
and the neighbor relation added successful.
Explanation
When the eNodeB reported neighbor relation of CDMA cell to the OMC,and
the neighbor relation added successful, it is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
5.3.3.39 C373474972 Number of Failed Handover to Temp Neighbor Cell between LTE
and CDMA
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
5-37
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation deletion of CDMA cell to the
OMC,and the neighbor relation deleted successful.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation of GSM cell to the OMC,and
the neighbor relation added successful.
Explanation
When the eNodeB reported neighbor relation of GSM cell to the OMC,and
the neighbor relation added successful, it is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
5-38
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
5.3.3.44 C373474977 Number of Failed Handover to Temp Neighbor Cell between LTE
and GSM
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
5-39
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reported neighbor relation deletion of GSM cell to the
OMC, and the neighbor relation deleted successful.
Explanation
Updated
The counter is used to count the number of temporary neighbor cell intra
RAT.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is modified when the number of temporary neighbor cell intra
RAT is altered.
5.3.3.48 C373474981 Number of Temp Neighbor Cell between LTE and UTRAN
Definition
Sampling Interval
Event triggered
Counter Type
Modification
5-40
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the number of temporary neighbor cell between LTE and UTRAN is
altered.
Explanation
When the number of temporary neighbor cell between LTE and UTRAN is
altered, it is modified the counter.
Updated
5.3.3.49 C373474982 Number of Temp Neighbor Cell between LTE and CDMA
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
When the number of temporary neighbor cell between LTE and CDMA is
altered.
Explanation
When the number of temporary neighbor cell between LTE and CDMA is
altered, it is modified the counter.
Updated
5.3.3.50 C373474983 Number of Temp Neighbor Cell between LTE and GSM
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Unit
Measurement Object
Cell
Sampling Point
When the number of temporary neighbor cell between LTE and GSM is
altered.
Explanation
When the number of temporary neighbor cell between LTE and GSM is
altered, it is modified the counter.
5-41
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of not meeting normal neighbour
relation addition condition intra RAT.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation can't meet the normal neighbour relation
addition condition intra RAT.
Explanation
Updated
The counter is incremented by 1 when the statistic duration is end and the
statistic result of the intra-RAT temporary neighbour relation can't meet the
normal neighbour relation addition condition intra RAT.
The counter is used to count the number of not sending normal neighbour
relation addition request because of full intra RAT.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that
the normal neighbour relation list is full intra RAT.
Explanation
The counter provides the number of not sending intra-RAT ANR neighbour
relation addition request because of that the normal neighbour relation
list is full intra RAT.
5-42
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of not meeting normal neighbour
relation addition condition between LTE and UTRAN.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and UTRAN.
Explanation
Updated
The counter is incremented by 1 when the statistic duration is end and the
statistic result of the intra-RAT temporary neighbour relation can't meet the
normal neighbour relation addition condition between LTE and UTRAN.
The counter is used to count the number of not sending normal neighbour
relation addition request because of full between LTE and UTRAN.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that
the normal neighbour relation list is full between LTE and UTRAN.
5-43
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the number of not sending intra-RAT ANR neighbour
relation addition request because of that the normal neighbour relation list
is full between LTE and UTRAN.
Updated
The counter is incremented by 1 when the statistic duration is end and the
statistic result of the intra-RAT temporary neighbour relation meets the
normal neighbour relation addition condition, but the eNodeB does not
send addition request because of that the normal neighbour relation list
is full between LTE and UTRAN.
The counter is used to count the number of not meeting normal neighbour
relation addition condition between LTE and CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and CDMA.
Explanation
Updated
The counter is incremented by 1 when the statistic duration is end and the
statistic result of the intra-RAT temporary neighbour relation can't meet the
normal neighbour relation addition condition between LTE and CDMA.
The counter is used to count the number of not sending normal neighbour
relation addition request because of full between LTE and CDMA.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
5-44
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that
the normal neighbour relation list is full between LTE and CDMA.
Explanation
The counter provides the number of not sending intra-RAT ANR neighbour
relation addition request because of that the normal neighbour relation
list is full between LTE and CDMA.
Updated
The counter is used to count the number of not meeting normal neighbour
relation addition condition between LTE and GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation can't meet the normal neighbour relation
addition condition between LTE and GSM.
Explanation
Updated
The counter is incremented by 1 when the statistic duration is end and the
statistic result of the intra-RAT temporary neighbour relation can't meet the
normal neighbour relation addition condition between LTE and GSM.
The counter is used to count the number of not sending normal neighbour
relation addition request because of full between LTE and GSM.
Sampling Interval
Event triggered
Counter Type
Accumulative
5-45
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the statistic duration is end and the statistic result of the intra-RAT
temporary neighbour relation meets the normal neighbour relation addition
condition, but the eNodeB does not send addition request because of that
the normal neighbour relation list is full between LTE and GSM.
Explanation
The counter provides the number of not sending intra-RAT ANR neighbour
relation addition request because of that the normal neighbour relation
list is full between LTE and GSM.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
5-46
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is used to count the number of inter-RAT(LTE>UTRAN)neighbour cell reported by UE.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The counter provides the number of UTRAN neighbour cell reported by UE.
Updated
The counter is used to count the number of inter-RAT(LTE>CDMA)neighbour cell reported by UE.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The counter provides the number of CDMA neighbour cell reported by UE.
Updated
5-47
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The counter provides the number of GSM neighbour cell reported by UE.
Updated
The counter is used to count the number of the service cell PCI same
to the neighbour cell.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell
Explanation
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell ,it is added to the counter.
Updated
When the eNodeB detects that the neighbour's PCI is the same to the
serving cell ,the counter is incremented by 1.
The counter is used to count the number of detecting the two neighbour
cells PCI being the same.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
5-48
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB detects that the two neighbours' PCI is the same.
Explanation
When the eNodeB detects that the two neighbours' PCI is the same ,it is
added to the counter.
Updated
When the eNodeB detects that the two neighbours' PCI is the same,the
counter is incremented by 1.
Counter
Counter Name
Number
1
C373990480
C373990481
C373990482
C373990483
C373990484
C373990485
C373990486
C373990487
C373990488
10
C373990489
11
C373990490
12
C373990491
Sampling Interval
Event triggered
Counter Type
Accumulative
5-49
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
The eNodeB initiates getting the remote IP for X2 self setup,it is added to
the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
The eNodeB gets the remote IP for X2 self setup initiated by the remote
eNodeB,it is added to the counter.
Updated
The counter is used to count the number of successful getted remote IP.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
The eNodeB gets the remote IP for X2 self successfully,it is added to the
counter.
Updated
5-50
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
The counter is used to count the number of link error X2 self delete.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB deletes the X2 SCTP due to link status error.
Explanation
The eNodeB deletes the X2 SCTP due to link status error,it is added to
the counter.
5-51
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
The eNodeB initiates the X2 self setup after configurating the relationship
with the neighbour cell,it is added to the counter.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
5-52
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB deletes the X2 SCTP successfully for non scanning of
the invalid X2 SCTP.
Explanation
The eNodeB deletes the X2 SCTP successfully for non scanning of the
invalid X2 SCTP,it is added to the counter.
Updated
The counter is used to count the number of report invalid X2 SCTP self
delete.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the eNodeB deletes the X2 SCTP successfully for scanning of the
invalid X2 SCTP.
Explanation
The eNodeB deletes the X2 SCTP successfully for scanning of the invalid
X2 SCTP,it is added to the counter.
Updated
5-54
SJ-20121224143652-001|20130925(R1.6)
Chapter 6
Counter
Counter Name
Number
1
C373404450
C373404451
C373404452
C373404453
C373404454
C373404455
C373404456
C373404457
C373404458
10
C373404459
11
C373404460
12
C373404461
13
C373404462
14
C373404463
15
C373404464
16
C373404465
Number of Cell Admission Failure due to Not Enough PRB Resource in Load
Balance Inter Manufacturer
6-1
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
17
C373404466
18
C373404467
19
C373404468
20
C373404469
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
6-2
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the number of cell DL load balance occurred.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of cell DL load control occurred.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of cell UL load control occurred.
6-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
6.1.3.6 C373404455 Number of Cell Admission Failure due to Not Enough RRC
Resource in eNodeB
Definition
The counter is used to count the number of cell admission failure due to
not enough RRC resource in eNodeB.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new UE due to not enough RRC resource.
Explanation
The eNodeB reject the new UE when the current user number is greater
than the threshold of user number in a cell, it is added to the counter.
Updated
6.1.3.7 C373404456 Number of Cell Admission Failure due to Not Enough E-RAB
Resource
Definition
The counter is used to count the number of cell admission failure due to
not enough E-RAB resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new E-RAB due to not enough E-RAB
resource.
6-4
SJ-20121224143652-001|20130925(R1.6)
Explanation
The eNodeB reject the new E-RAB when the current active E-RAB number
is greater than the threshold of active E-RAB number in a cell, it is added
to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough E-RAB resource.
6.1.3.8 C373404457 Number of Cell Admission Failure due to Not Enough DL PRB
Resource
Definition
The counter is used to count the number of cell admission failure due
to not enough DL PRB resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new E-RAB due to not enough DL PRB
resource.
Explanation
The eNodeB reject the new E-RAB when the current DL PRB usage is
higher than the threshold, it is added to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough DL PRB resource.
6.1.3.9 C373404458 Number of Cell Admission Failure due to Not Enough UL PRB
Resource
Definition
The counter is used to count the number of cell admission failure due
to not enough UL PRB resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new E-RAB due to not enough UL PRB
resource.
Explanation
The eNodeB reject the new E-RAB when the current UL PRB usage is
higher than the threshold, it is added to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough UL PRB resource.
6-5
SJ-20121224143652-001|20130925(R1.6)
6.1.3.10 C373404459 Number of Cell Admission Failure due to Not Enough Transport
Resource
Definition
The counter is used to count the number of cell admission failure due
to not enough transport resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new E-RAB due to not enough transport
resource.
Explanation
The eNodeB reject the new E-RAB when the transport resource is not
enough, it is added to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough transport resource.
The counter is used to count the number of cell admission failure due
to cell block.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB reject the new UE due to cell block, it is added to the counter.
Updated
6.1.3.12 C373404461 Number of Cell Admission Failure due to Not Enough DL Power
Definition
The counter is used to count the number of cell admission failure due to
not enough DL power.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
6-6
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB reject the new E-RAB due to not enough DL power
resource.
Explanation
The eNodeB reject the new E-RAB when the DL power resource is not
enough, it is added to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough DL power resource.
6.1.3.13 C373404462 Number of Cell Admission Failure due to PHY Resource Allocated
Failure
Definition
The counter is used to count the number of cell admission failure due
to PHY resource allocated failure.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new UE or new E-RAB due to PHY resource
allocated failure.
Explanation
The eNodeB reject the new UE or new E-RAB when the PHY resource
allocated failure, it is added to the counter.
Updated
The counter is used to count the number of cell admission failure due
to other reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new UE or new E-RAB due to other reason.
Explanation
The eNodeB reject the new UE or new E-RAB due to other reason, it is
added to the counter.
Updated
6-7
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of cell admission failure due
to probability refuse.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB reject the new UE when the probability refuse, it is added to
the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new UE due
to probability refuse.
6.1.3.16 C373404465 Number of Cell Admission Failure due to Not Enough PRB
Resource in Load Balance Inter Manufacturer
Definition
The counter is used to count the number of cell admission failure due to
not enough PRB resource in load balance inter manufacturer.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new E-RAB due to not enough PRB resource
in load balance inter manufacturer resource.
Explanation
The eNodeB reject the new E-RAB when the PRB resource in load balance
inter manufacturer resource is not enough, it is added to the counter.
Updated
The counter is incremented by 1 when the eNodeB reject the new E-RAB
due to not enough PRB resource in load balance inter manufacturer
resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
6-8
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of cell UL load balance occurred
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
6.1.3.20 C373404469 Number of Cell Admission Failure due to Not Enough CPU
Resource
Definition
The counter is used to count the number of cell admission failure due to
not enough CPU resource.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB reject the new UE or new E-RAB due to not enough
CPU resource.
Explanation
The eNodeB reject the new UE or new E-RAB when the current CPU
usage of CC board is greater than the threshold of CPU usage, it is added
to the counter.
Updated
6-10
SJ-20121224143652-001|20130925(R1.6)
Chapter 7
Counter
Counter Name
Number
1
C373230700
C373230701
C373230702
C373230703
C373230704
C373230705
The counter is used to count the time the cell has been available.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting service time of cell at sampling time.
7-1
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB successfully setup a cell, record the start time. When
the eNodeB delete a cell due to some reasons, record the end time.The
cell service time is equal to the interval from the start time to the end time.
Updated
The counter is used to count the time the cell has been unavailable for
cell block.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting unavailable time of cell due to cell block
at sampling time.
Explanation
When the eNodeB receives the CellBlockCommand from the OMC, record
the start time. When the eNodeB receives the CellUnblockCommand from
the OMC, record the end time.
The cell unavailable time due to cell block time is equal to the interval
from the start time to the end time.
Updated
The counter is incremented by the cell unavailable time due to cell block at
per measurement period.
The counter is used to count the time the cell has been unavailable for
S1 link fault.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting unavailable time of cell due to S1 link
fault at sampling time.
Explanation
When the eNodeB detects S1 link fault, record the start time. When the
eNodeB detects S1 link normal, record the end time.
The cell unavailable time due to s1 link fault is equal to the interval from
the start time to the end time.
7-2
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the time the cell has been unavailable for
BBU abnormal.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting unavailable time of cell due to BBU
abnormal at sampling time.
Explanation
When the eNodeB detects BBU abnormal, record the start time. When the
eNodeB detects BBU normal, record the end time.
The cell unavailable time due to BBU abnormal is equal to the interval
from the start time to the end time.
Updated
The counter is used to count the time the cell has been unavailable for
RRU abnormal.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting unavailable time of cell due to RRU
abnormal at sampling time.
Explanation
When the eNodeB detects RRU abnormal, record the start time. When the
eNodeB detects RRU normal, record the end time.
The cell unavailable time due to RRU abnormal is equal to the interval
from the start time to the end time.
Updated
7-3
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the time the cell has been unavailable for
cell configuration or other reason.
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Measurement Object
Cell
Sampling Point
The eNodeB reports the collecting unavailable time of cell due to cell
configuration at sampling time.
Explanation
When the eNodeB start to config a cell, record the start time. When the
eNodeB successfully config a cell, record the end time.
The cell unavailable time due to cell configuration is equal to the interval
from the start time to the end time.
Updated
7-4
SJ-20121224143652-001|20130925(R1.6)
Chapter 8
Statistics of Redirection
Table of Contents
LTE-UTRAN Redirection ............................................................................................8-1
LTE-CDMA Redirection ..............................................................................................8-4
LTE-GSM Redirection.................................................................................................8-7
Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
Counter
Counter Name
Number
1
C373576607
C373576608
C373576609
C373576610
C373576611
8-1
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
8-2
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
8-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
8-4
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373576614
C373576615
C373576616
C373576617
C373576618
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of Redirection requests from LTE
to CDMA2000 for A2 event reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
8-5
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of Redirection requests from LTE
to CDMA2000 for cell block reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of Redirection requests from LTE
to CDMA2000 for B2 event reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
8-6
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of Redirection requests from LTE
to CDMA2000 for saving energy.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
8-7
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 1: The EUTRAN sends the RRC CONNECTION RELEASE message
to the UE.
Counter
Counter Name
Number
1
C373576600
C373576601
C373576602
C373576603
C373576604
The counter is used to count the number of Redirection requests from LTE
to GSM for CSFB reason.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the the number of Redirection requests from LTE
to GSM for CSFB reason.
8-8
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
8-9
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of Redirection requests from LTE
to GSM for saving energy.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
8-10
SJ-20121224143652-001|20130925(R1.6)
Updated
8-11
SJ-20121224143652-001|20130925(R1.6)
8-12
SJ-20121224143652-001|20130925(R1.6)
Chapter 9
Statistics of Handover
Table of Contents
Intra-Rat Intra-Freq Handover on Cell.........................................................................9-2
Intra-Rat Inter-Freq Handover on Cell.......................................................................9-38
Inter-Rat Handover on Cell .......................................................................................9-75
Handover per Handover Cause on Cell .................................................................. 9-110
Intra-Rat Intra-Freq Handover on EUtranRelation...................................................9-137
Intra-Rat Inter-Freq Handover on EUtranRelation...................................................9-173
Inter-Rat Handover on EUtranRelation ...................................................................9-210
SRVCC Handover ..................................................................................................9-245
RSRP and RSRQ ..................................................................................................9-250
Handover Time.......................................................................................................9-281
DRX Handover .......................................................................................................9-284
GAP Handover .......................................................................................................9-289
9-1
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
Sampling Point 3: The handover execution process.
Sampling
Point
4:
The
eNodeB
receives
the
RRCConnectionReconfigurationComplete
message
from
UE
indicating
handover successfully.
Sampling
Point
5:
The
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling
Point
6:
The
eNodeB
receives
the
RRCConnectionReestablishmentRequest
message
from
UE
during
intra-eNB handover.
9-2
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373250900
C373250901
C373250902
C373250903
C373250940
C373250941
C373250942
C373250943
C373250980
10
C373250981
11
C373250982
12
C373250983
13
C373250984
14
C373250985
15
C373250986
16
C373250987
17
C373250988
18
C373250989
9-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.1.3.2 C373250901 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-4
SJ-20121224143652-001|20130925(R1.6)
9.1.1.3.3 C373250902 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Because the target cell has no enough resources, the source cell reports
the handover preparation failure.
Updated
9.1.1.3.4 C373250903 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Because the source cell occurs other failure during handover preparation,
it reports handover preparation failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-5
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.1.1.3.6 C373250941 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.1.3.7 C373250942 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover preparation indicating a
incoming intra-eNB handover failure.
Updated
9-6
SJ-20121224143652-001|20130925(R1.6)
9.1.1.3.8 C373250943 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The targe cell in eNB occurs other failures during handover preparation
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.1.3.10 C373250981 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-7
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution indicating a
outgoing intra-eNB handover failure.
Updated
9.1.1.3.11 C373250982 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the source
report handover failure indicating a outgoing intra-eNB handover failure.
Updated
9.1.1.3.12 C373250983 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in source cell.
Explanation
The source cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
9-8
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.1.3.14 C373250985 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to RRC
ReconfigComplete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9-9
SJ-20121224143652-001|20130925(R1.6)
9.1.1.3.15 C373250986 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the target
report handover failure indicating a incoming intra-eNB handover failure.
Updated
9.1.1.3.16 C373250987 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in target cell.
Explanation
The targe cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
Updated
9.1.1.3.17 C373250988 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-10
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source cell during
handover preparation.
Explanation
Updated
9.1.1.3.18 C373250989 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Waiting
Reconfiguration Complete timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfiguration Complete message expires in target cell.
9-11
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
Sampling
Point
5:
The
source
eNodeB
occurs
timeout
for
HandoverRequestAcknowledge message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
Sampling Point 7: The target eNodeB sends the HandoverPreprationFailure message
to the source eNodeB.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-12
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
l
Sampling
Point
9:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
10:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 11: The target eNodeB sends the PathSwitchRequest message to
MME.
Sampling Point 12: The target eNodeB receives the PathSwitchAck message from
MME.
Sampling Point 13: The target eNodeB receives the PathSwitchFailure message from
MME.
Sampling Point 14: The target eNodeB occurs timeout for PathSwitchAck message.
Sampling Point 15: The target eNodeB sends the UEContextRelease message to the
source eNodeB.
Sampling Point 16: The source eNodeB receives the UEContextRelease message
from the target the eNodeB.
Sampling Point 17: The source eNodeB occurs timeout for UEContextRelease
message.
Sampling
Point
20:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB X2 handover.
the
during
9-13
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373261200
C373261201
C373261202
C373261203
C373261204
C373261240
C373261241
C373261242
C373261243
10
C373261280
11
C373261281
12
C373261282
13
C373261283
14
C373261284
15
C373261285
16
C373261286
17
C373261287
9-14
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C373261288
19
C373261289
20
C373261290
21
C373261291
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.2 C373261201 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
HO Request Ack Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-15
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.3 C373261202 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.4 C373261203 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-16
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.5 C373261204 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.6 C373261240 Number of Successful Incoming Inter-eNB(via X2) Intra-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.1.2.3.7 C373261241 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.8 C373261242 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Source Cancle HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Intra-freq handover preparation failures due to source
cancel handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
9-18
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.1.2.3.9 C373261243 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.1.2.3.10 C373261280 Number of Successful Outgoing Inter-eNB(via X2) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.1.2.3.11 C373261281 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 20
Explanation
Updated
9.1.2.3.12 C373261282 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
9.1.2.3.13 C373261283 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.1.2.3.14 C373261284 Number of Successful Incoming Inter-eNB(via X2) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.15 C373261285 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
9-21
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 10
Explanation
Updated
9.1.2.3.16 C373261286 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Path Switch Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.2.3.17 C373261287 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
9-22
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.1.2.3.18 C373261288 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the Handover Cancel message from
the source eNodeB.
Explanation
Updated
9.1.2.3.19 C373261289 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-23
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.1.2.3.20 C373261290 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Intra-freq handover preparation failures due to RRC
connection reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE during handover preparation.
Explanation
Updated
9.1.2.3.21 C373261291 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-24
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE during handover execution.
Explanation
Updated
9-25
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
9-26
SJ-20121224143652-001|20130925(R1.6)
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373271500
C373271501
C373271502
C373271503
C373271504
C373271540
C373271541
9-27
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
8
C373271542
C373271543
10
C373271580
11
C373271581
12
C373271582
13
C373271583
14
C373271584
15
C373271585
16
C373271586
17
C373271587
18
C373271588
19
C373271589
20
C373271590
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-28
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.2 C373271501 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.3 C373271502 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-29
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.1.3.3.4 C373271503 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.5 C373271504 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-30
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.1.3.3.6 C373271540 Number of Successful Incoming Inter-eNB(via S1) Intra-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.7 C373271541 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
9-31
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.1.3.3.8 C373271542 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Intra-freq handover preparation failures due to source
cancle handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.9 C373271543 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.1.3.3.10 C373271580 Number of Successful Outgoing Inter-eNB(via S1) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.11 C373271581 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 15
Explanation
Updated
9-33
SJ-20121224143652-001|20130925(R1.6)
9.1.3.3.12 C373271582 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.13 C373271583 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.1.3.3.14 C373271584 Number of Successful Incoming Inter-eNB(via S1) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
9-34
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.15 C373271585 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9.1.3.3.16 C373271586 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-35
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.1.3.3.17 C373271587 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.1.3.3.18 C373271588 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-36
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.1.3.3.19 C373271589 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Intra-freq handover preparation failures due to
reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.1.3.3.20 C373271590 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
9-37
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
l
l
l
l
Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
Sampling Point 3: The handover execution process.
Sampling
Point
4:
The
eNodeB
receives
the
RRCConnectionReconfigurationComplete
message
from
UE
indicating
handover successfully.
9-38
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling
Point
5:
The
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling
Point
6:
The
eNodeB
receives
the
RRCConnectionReestablishmentRequest
message
from
UE
during
intra-eNB handover.
Counter
Counter Name
Number
1
C373281800
C373281801
C373281802
C373281803
C373281840
C373281841
C373281842
C373281843
C373281880
10
C373281881
11
C373281882
12
C373281883
13
C373281884
14
C373281885
15
C373281886
16
C373281887
9-39
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
17
C373281888
18
C373281889
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.1.3.2 C373281801 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-40
SJ-20121224143652-001|20130925(R1.6)
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during the preparation of resources in
target cell. The source reports handover preparation failure.
Updated
9.2.1.3.3 C373281802 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Because the target cell in eNB has no enough resources, the source cell
reports handover preparation failure.
Updated
9.2.1.3.4 C373281803 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Because the source cell in eNB occurs other failure during handover
preparation, it reports handover preparation failure.
Updated
Sampling Interval
Event triggered
9-41
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.1.3.6 C373281841 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.1.3.7 C373281842 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-42
SJ-20121224143652-001|20130925(R1.6)
Explanation
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover preparation indicating a
incoming intra-eNB handover failure.
Updated
9.2.1.3.8 C373281843 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The targe cell in eNB occurs other failures during handover preparation
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-43
SJ-20121224143652-001|20130925(R1.6)
9.2.1.3.10 C373281881 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution indicating a
outgoing intra-eNB handover failure.
Updated
9.2.1.3.11 C373281882 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the source
report handover failure indicating a outgoing intra-eNB handover failure.
Updated
9.2.1.3.12 C373281883 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-44
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in source cell.
Explanation
The source cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.1.3.14 C373281885 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
9-45
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9.2.1.3.15 C373281886 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the target
report handover failure indicating a incoming intra-eNB handover failure.
Updated
9.2.1.3.16 C373281887 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in target cell.
Explanation
The targe cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
Updated
9-46
SJ-20121224143652-001|20130925(R1.6)
9.2.1.3.17 C373281888 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source cell during
handover preparation.
Explanation
Updated
9.2.1.3.18 C373281889 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Waiting
Reconfiguration Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9-47
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
Sampling
Point
5:
The
source
eNodeB
occurs
timeout
for
HandoverRequestAcknowledge message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
9-48
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
l
l
l
9-49
SJ-20121224143652-001|20130925(R1.6)
Sampling
Point
20:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB X2 handover.
the
during
Counter
Counter Name
Number
1
C373292100
C373292101
C373292102
C373292103
C373292104
C373292140
C373292141
C373292142
C373292143
10
C373292180
11
C373292181
12
C373292182
13
C373292183
14
C373292184
15
C373292185
9-50
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
16
C373292186
17
C373292187
18
C373292188
19
C373292189
20
C373292190
21
C373292191
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-51
SJ-20121224143652-001|20130925(R1.6)
9.2.2.3.2 C373292101 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
HO Request Ack Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.2.3.3 C373292102 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-52
SJ-20121224143652-001|20130925(R1.6)
9.2.2.3.4 C373292103 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.2.3.5 C373292104 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.2.3.6 C373292140 Number of Successful Incoming Inter-eNB(via X2) Inter-freq Handover Preparation
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.2.3.7 C373292141 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.2.3.8 C373292142 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Inter-freq handover preparation failures due to source
cancle handover.
9-54
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
Explanation
Updated
9.2.2.3.9 C373292143 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.2.2.3.10 C373292180 Number of Successful Outgoing Inter-eNB(via X2) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-55
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.2.2.3.11 C373292181 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 20
Explanation
Updated
9.2.2.3.12 C373292182 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-56
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.2.2.3.13 C373292183 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.2.2.3.14 C373292184 Number of Successful Incoming Inter-eNB(via X2) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.2.2.3.15 C373292185 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
RRC Reconfig Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete expires.
Sampling Point 10
Explanation
Updated
9.2.2.3.16 C373292186 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Path Switch Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
9-58
SJ-20121224143652-001|20130925(R1.6)
Updated
9.2.2.3.17 C373292187 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.2.2.3.18 C373292188 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
Explanation
Updated
9-59
SJ-20121224143652-001|20130925(R1.6)
9.2.2.3.19 C373292189 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB
during handover preparation.
Explanation
Updated
9.2.2.3.20 C373292190 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Inter-freq handover preparation failures due to
reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-60
SJ-20121224143652-001|20130925(R1.6)
9.2.2.3.21 C373292191 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-61
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-62
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373302400
C373302401
9-63
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373302402
C373302403
C373302404
C373302440
C373302441
C373302442
C373302443
10
C373302480
11
C373302481
12
C373302482
13
C373302483
14
C373302484
15
C373302485
16
C373302486
17
C373302487
18
C373302488
19
C373302489
20
C373302490
9-64
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.2 C373302401 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-65
SJ-20121224143652-001|20130925(R1.6)
9.2.3.3.3 C373302402 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.4 C373302403 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.5 C373302404 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
9-66
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.6 C373302440 Number of Successful Incoming Inter-eNB(via S1) Inter-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.7 C373302441 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-67
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.2.3.3.8 C373302442 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Inter-freq handover preparation failures due to source
cancle handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.9 C373302443 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-68
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.2.3.3.10 C373302480 Number of Successful Outgoing Inter-eNB(via S1) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.11 C373302481 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 15
9-69
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.2.3.3.12 C373302482 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.13 C373302483 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.2.3.3.14 C373302484 Number of Successful Incoming Inter-eNB(via S1) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.15 C373302485 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9-71
SJ-20121224143652-001|20130925(R1.6)
9.2.3.3.16 C373302486 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.17 C373302487 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.2.3.3.18 C373302488 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
9-72
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.2.3.3.19 C373302489 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Inter-freq handover preparation failures due to
reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.2.3.3.20 C373302490 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-73
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-74
SJ-20121224143652-001|20130925(R1.6)
9-75
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-76
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373312700
C373312701
9-77
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373312702
C373312703
C373312704
C373312705
C373312706
C373312707
C373312708
10
C373312709
11
C373312710
12
C373312711
13
C373312712
14
C373312713
15
C373312714
16
C373312715
17
C373312716
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.1.3.2 C373312701 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB sends the HandoverFailure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.3.1.3.3 C373312702 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-79
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.1.3.4 C373312703 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-80
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.3.1.3.6 C373312705 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9.3.1.3.7 C373312706 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-81
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.3.1.3.8 C373312707 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.3.1.3.10 C373312709 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.1.3.11 C373312710 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
Dst Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
9.3.1.3.12 C373312711 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-84
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.3.1.3.15 C373312714 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.1.3.16 C373312715 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-85
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.3.1.3.17 C373312716 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB
during handover preparation.
Explanation
Updated
9-86
SJ-20121224143652-001|20130925(R1.6)
9-87
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-88
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373323000
C373323001
9-89
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373323002
C373323003
C373323004
C373323005
C373323006
C373323007
C373323008
10
C373323009
11
C373323010
12
C373323011
13
C373323012
14
C373323013
15
C373323014
16
C373323015
17
C373323016
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.2.3.2 C373323001 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.3.2.3.3 C373323002 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-91
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.2.3.4 C373323003 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-92
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.3.2.3.6 C373323005 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9.3.2.3.7 C373323006 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-93
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.3.2.3.8 C373323007 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.3.2.3.10 C373323009 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.2.3.11 C373323010 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to Dst
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
9.3.2.3.12 C373323011 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-96
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.3.2.3.15 C373323014 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.2.3.16 C373323015 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-97
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.3.2.3.17 C373323016 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to
User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB
during handover preparation.
Explanation
Updated
9-98
SJ-20121224143652-001|20130925(R1.6)
9-99
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-100
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373333300
C373333301
9-101
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373333302
C373333303
C373333304
C373333305
C373333306
C373333307
C373333308
10
C373333309
11
C373333310
12
C373333311
13
C373333312
14
C373333313
15
C373333314
16
C373333315
17
C373333316
Sampling Interval
Event triggered
9-102
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.3.3.2 C373333301 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.3.3.3.3 C373333302 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-103
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.3.3.4 C373333303 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-104
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.3.3.3.6 C373333305 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9.3.3.3.7 C373333306 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to Path
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.3.3.3.8 C373333307 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-106
SJ-20121224143652-001|20130925(R1.6)
9.3.3.3.10 C373333309 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to HO
Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.3.3.11 C373333310 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to
Destination Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-107
SJ-20121224143652-001|20130925(R1.6)
9.3.3.3.12 C373333311 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-108
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.3.3.3.15 C373333314 Number of Outgoing Inter-RAT(LTE to GSM) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.3.3.3.16 C373333315 Number of Outgoing Inter-RAT(LTE to GSM) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-109
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.3.3.3.17 C373333316 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to User
Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The eNodeB detects that the UE's state is "inactive" in source eNodeB
during handover preparation.
Explanation
Updated
9-110
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373485100
C373485101
C373485102
C373485103
C373485104
C373485105
C373485106
C373485107
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation completes. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.4.1.3.2 C373485101 Number of Outgoing Inter-Cell Intra-freq Handover Preparation Failure based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9.4.1.3.3 C373485102 Number of Successful Outgoing Inter-Cell Intra-freq Handover Execution based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover completes. The sampling point changes
with the handover type. For details, refer to the descriptions of Sampling
Point of intra-eNB handover, X2 interface handover, and S1 interface
handover.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
9.4.1.3.4 C373485103 Number of Outgoing Inter-Cell Intra-freq Handover Execution Failure based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover fails. The sampling point changes with the
handover type. For details, refer to the descriptions of Sampling Point of
intra-eNB handover, X2 interface handover, and S1 interface handover.
Explanation
Updated
9.4.1.3.5 C373485104 Number of Successful Outgoing Inter-Cell Inter-freq Handover Preparation based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation completes. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9-113
SJ-20121224143652-001|20130925(R1.6)
9.4.1.3.6 C373485105 Number of Outgoing Inter-Cell Inter-freq Handover Preparation Failure based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9.4.1.3.7 C373485106 Number of Successful Outgoing Inter-Cell Inter-freq Handover Execution based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover completes. The sampling point changes
with the handover type. For details, refer to the descriptions of Sampling
Point of intra-eNB handover, X2 interface handover, and S1 interface
handover.
Explanation
Updated
9-114
SJ-20121224143652-001|20130925(R1.6)
9.4.1.3.8 C373485107 Number of Outgoing Inter-Cell Inter-freq Handover Execution Failure based Covering
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover fails. The sampling point changes with the
handover type. For details, refer to the descriptions of Sampling Point of
intra-eNB handover, X2 interface handover, and S1 interface handover.
Explanation
Updated
Counter
Counter Name
Number
1
C373485108
C373485109
C373485110
C373485111
C373485112
C373485113
9-115
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
7
C373485114
C373485115
C373485116
10
C373485117
11
C373485118
12
C373485119
13
C373485120
14
C373485121
15
C373485122
16
C373733300
17
C373733301
18
C373733302
19
C373733303
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation completes. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
9-116
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.4.2.3.2 C373485109 Number of Outgoing Inter-Cell Inter-freq Handover Preparation Failure based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9.4.2.3.3 C373485110 Number of Successful Outgoing Inter-Cell Inter-freq Handover Execution based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover completes. The sampling point changes
with the handover type. For details, refer to the descriptions of Sampling
Point of intra-eNB handover, X2 interface handover, and S1 interface
handover.
9-117
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.4.2.3.4 C373485111 Number of Outgoing Inter-Cell Inter-freq Handover Execution Failure based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover fails. The sampling point changes with the
handover type. For details, refer to the descriptions of Sampling Point of
intra-eNB handover, X2 interface handover, and S1 interface handover.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
9-118
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-119
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.4.2.3.9 C373485116 Number of Successful Outgoing X2 Handover Execution Failure based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of outgoing handover cancel for
loadbalance via X2 interface.
Sampling Interval
Event triggered
Counter Type
Accumulative
9-120
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
9-121
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of incoming handover cancel for
loadbalance via X2 interface.
Sampling Interval
Event triggered
9-122
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9.4.2.3.16 C373733300 UL Unbalance Degree before HO between Serving Cell and Neighbor Cell
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Percent
Measurement Object
EUtran Relation
Sampling Point
When the period for load balancing is arriving, and the serving cell need
to execute load balancing.
Explanation
unbalance_degree_UL_before_HO_i = ABSOLUTE(max(ULT_s,
ucUlPRBLBExeThrdZ) max(ULT_i, ucUlPRBLBExeThrdZ))
ULT_s indicates UL PRB usage of serving cell, ULT_i indicates UL PRB
usage of neighbor cell i, ucUlPRBLBExeThrdZ indicates UL execute
threshold of radio resource for load balancing.
Updated
The counter is updated when the period for load balancing is arriving, and
the serving cell need to execute load balancing.
9.4.2.3.17 C373733301 DL Unbalance Degree before HO between Serving Cell and Neighbor Cell
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Percent
Measurement Object
EUtran Relation
Sampling Point
When the period for load balancing is arriving, and the serving cell need
to execute load balancing.
9-123
SJ-20121224143652-001|20130925(R1.6)
Explanation
unbalance_degree_DL_before_HO_i = ABSOLUTE(max(DLT_s,
ucDlPRBLBExeThrdZ) max(DLT_i, ucDlPRBLBExeThrdZ))
DLT_s indicates DL PRB usage of serving cell, DLT_i indicates DL PRB
usage of neighbor cell i, ucDlPRBLBExeThrdZ indicates DL execute
threshold of radio resource for load balancing.
Updated
The counter is updated when the period for load balancing is arriving, and
the serving cell need to execute load balancing.
9.4.2.3.18 C373733302 UL Unbalance Degree Estimate after HO between Serving Cell and Neighbor Cell
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Percent
Measurement Object
EUtran Relation
Sampling Point
When the period for load balancing is arriving, and the serving cell need
to execute load balancing.
Explanation
unbalance_degree_UL_after_HO_i = ABSOLUTE(max(ULT_s_after,
ucUlPRBLBExeThrdZ) max(ULT_i_after, ucUlPRBLBExeThrdZ))
ULT_s_after indicates estimated UL PRB usage of serving cell after HO,
ULT_i_after indicates estimated UL PRB usage of neighbor cell i after HO,
ucUlPRBLBExeThrdZ indicates UL execute threshold of radio resource for
load balancing.
Updated
The counter is updated when the period for load balancing is arriving, and
the serving cell need to execute load balancing.
9.4.2.3.19 C373733303 DL Unbalance Degree Estimate after HO between Serving Cell and Neighbor Cell
Definition
Sampling Interval
Event triggered
Counter Type
Modification
Unit
Percent
Measurement Object
EUtran Relation
Sampling Point
When the period for load balancing is arriving, and the serving cell need
to execute load balancing.
9-124
SJ-20121224143652-001|20130925(R1.6)
Explanation
unbalance_degree_DL_after_HO_i = ABSOLUTE(max(DLT_s_after,
ucDlPRBLBExeThrdZ) max(DLT_i_after, ucDlPRBLBExeThrdZ))
DLT_s_after indicates estimated DL PRB usage of serving cell after HO,
DLT_i_after indicates estimated DL PRB usage of neighbor cell i after HO,
ucDlPRBLBExeThrdZ indicates DL execute threshold of radio resource for
load balancing.
Updated
The counter is updated when the period for load balancing is arriving, and
the serving cell need to execute load balancing.
Counter
Counter Name
Number
1
C373485123
C373485124
C373485125
C373485126
C373485133
C373485135
C373485136
C373485137
C373485138
10
C373485139
11
C373485141
12
C373485143
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
13
C373485144
14
C373485145
15
C373485146
16
C373485147
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover preparation completes. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNodeB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9.4.3.3.2 C373485124 Number of Outgoing Inter-Cell Intra-freq Handover Preparation Failure based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-126
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the source cell handover preparation fails. The sampling point
changes with the handover type. For details, refer to the descriptions of
Sampling Point of intra-eNodeB handover, X2 interface handover, and S1
interface handover.
Explanation
Updated
9.4.3.3.3 C373485125 Number of Successful Outgoing Inter-Cell Intra-freq Handover Execution based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source cell handover completes. The sampling point changes
with the handover type. For details, refer to the descriptions of Sampling
Point of intra-eNodeB handover, X2 interface handover, and S1 interface
handover.
Explanation
Updated
9.4.3.3.4 C373485126 Number of Outgoing Inter-Cell Intra-freq Handover Execution Failure based LoadBalance
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-127
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the source cell handover fails. The sampling point changes with the
handover type. For details, refer to the descriptions of Sampling Point of
intra-eNodeB handover, X2 interface handover, and S1 interface handover.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-128
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
9-131
SJ-20121224143652-001|20130925(R1.6)
Unit
times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
9-132
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
9-133
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-134
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
9-135
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
9-136
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
Sampling Point 2: The eNodeB sends the RRCConnectionReconfiguration message
to UE.
Sampling Point 3: The handover execution process.
Sampling
Point
4:
The
eNodeB
receives
the
RRCConnectionReconfigurationComplete
message
from
UE
indicating
handover successfully.
Sampling
Point
5:
The
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling
Point
6:
The
eNodeB
receives
the
RRCConnectionReestablishmentRequest
message
from
UE
during
intra-eNB handover.
9-137
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373600000
C373600001
C373600002
C373600003
C373600040
C373600041
C373600042
C373600043
C373600080
10
C373600081
11
C373600082
12
C373600083
13
C373600084
14
C373600085
15
C373600086
16
C373600087
17
C373600088
18
C373600089
9-138
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.1.3.2 C373600001 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during the preparation of resources in
target cell. The source reports handover preparation failure.
Updated
9-139
SJ-20121224143652-001|20130925(R1.6)
9.5.1.3.3 C373600002 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to Dest
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Because the target cell in eNB has no enough resources, the source cell
reports handover preparation failure.
Updated
9.5.1.3.4 C373600003 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Because the source cell in eNB occurs other failure during handover
preparation , it reports handover preparation failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-140
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.5.1.3.6 C373600041 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.1.3.7 C373600042 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The targe cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover preparation indicating a
incoming intra-eNB handover failure.
Updated
9-141
SJ-20121224143652-001|20130925(R1.6)
9.5.1.3.8 C373600043 Number of Incoming Intra-eNB Intra-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The targe cell in eNB occurs other failures during handover preparation
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source cell receives the UeContexRelease message from the
target cell.
Sampling Point 4
Explanation
Updated
9.5.1.3.10 C373600081 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-142
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution indicating a
outgoing intra-eNB handover failure.
Updated
9.5.1.3.11 C373600082 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the source
report handover failure indicating a outgoing intra-eNB handover failure.
Updated
9.5.1.3.12 C373600083 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in source cell.
Explanation
The source cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
9-143
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.1.3.14 C373600085 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9-144
SJ-20121224143652-001|20130925(R1.6)
9.5.1.3.15 C373600086 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to Dest Occur
Reestblishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the target
report handover failure indicating a incoming intra-eNB handover failure.
Updated
9.5.1.3.16 C373600087 Number of Incoming Intra-eNB Intra-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in target cell.
Explanation
The targe cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
Updated
9.5.1.3.17 C373600088 Number of Outgoing Intra-eNB Intra-freq Handover Preparation Failure due to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-145
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.1.3.18 C373600089 Number of Outgoing Intra-eNB Intra-freq Handover Execution Failure due to Waiting
Reconfiguration Complete timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9-146
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
Sampling
Point
5:
The
source
eNodeB
occurs
timeout
for
HandoverRequestAcknowledge message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
Sampling Point 7: The target eNodeB sends the HandoverPreprationFailure message
to the source eNodeB.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-147
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
l
Sampling
Point
9:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
10:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 11: The target eNodeB sends the PathSwitchRequest message to
MME.
Sampling Point 12: The target eNodeB receives the PathSwitchAck message from
MME.
Sampling Point 13: The target eNodeB receives the PathSwitchFailure message from
MME.
Sampling Point 14: The target eNodeB occurs timeout for PathSwitchAck message.
Sampling Point 15: The target eNodeB sends the UEContextRelease message to the
source eNodeB.
Sampling Point 16: The source eNodeB receives the UEContextRelease message
from the target the eNodeB.
Sampling Point 17: The source eNodeB occurs timeout for UEContextRelease
message.
Sampling
Point
20:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB X2 handover.
the
during
9-148
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373610300
C373610301
C373610302
C373610303
C373610304
C373610340
C373610341
C373610342
C373610343
10
C373610380
11
C373610381
12
C373610382
13
C373610383
14
C373610384
15
C373610385
16
C373610386
17
C373610387
9-149
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C373610388
19
C373610389
20
C373610390
21
C373610391
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.2 C373610301 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
HO Request ACK Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-150
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.3 C373610302 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.4 C373610303 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-151
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.5 C373610304 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.6 C373610340 Number of Successful Incoming Inter-eNB(via X2) Intra-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.5.2.3.7 C373610341 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.2.3.8 C373610342 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Source Cancle HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Intra-freq handover preparation failures due to source
cancle handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
9-153
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.5.2.3.9 C373610343 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.5.2.3.10 C373610380 Number of Successful Outgoing Inter-eNB(via X2) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.5.2.3.11 C373610381 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 20
Explanation
Updated
9.5.2.3.12 C373610382 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
9-155
SJ-20121224143652-001|20130925(R1.6)
Updated
9.5.2.3.13 C373610383 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.5.2.3.14 C373610384 Number of Successful Incoming Inter-eNB(via X2) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-156
SJ-20121224143652-001|20130925(R1.6)
9.5.2.3.15 C373610385 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfiguration Complete message expires.
Sampling Point 10
Explanation
Updated
9.5.2.3.16 C373610386 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Path Switch Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-157
SJ-20121224143652-001|20130925(R1.6)
9.5.2.3.17 C373610387 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.5.2.3.18 C373610388 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
Explanation
Updated
9.5.2.3.19 C373610389 Number of Outgoing Inter-eNB(via X2) Intra-freq Handover Preparation Failure due
to User Inactivity
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
The eNodeB detects that the UE's state is "inactive" during handover
preparation.
Explanation
Updated
9.5.2.3.20 C373610390 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Intra-freq handover preparation failures due to RRC
connection reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.5.2.3.21 C373610391 Number of Incoming Inter-eNB(via X2) Intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
9-159
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-160
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-161
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373620600
C373620601
9-162
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373620602
C373620603
C373620604
C373620640
C373620641
C373620642
C373620643
10
C373620680
11
C373620681
12
C373620682
13
C373620683
14
C373620684
15
C373620685
16
C373620686
17
C373620687
18
C373620688
19
C373620689
20
C373620690
9-163
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.2 C373620601 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-164
SJ-20121224143652-001|20130925(R1.6)
9.5.3.3.3 C373620602 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.4 C373620603 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.5 C373620604 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.6 C373620640 Number of Successful Incoming Inter-eNB(via S1) Intra-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.7 C373620641 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-166
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.5.3.3.8 C373620642 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Intra-freq handover preparation failures due to source
cancle handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.9 C373620643 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-167
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.5.3.3.10 C373620680 Number of Successful Outgoing Inter-eNB(via S1) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.11 C373620681 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 15
9-168
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.5.3.3.12 C373620682 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB's timer of waiting for the UEContextReleaseCommand message expires.
Sampling Point 14
Explanation
Updated
9.5.3.3.13 C373620683 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.5.3.3.14 C373620684 Number of Successful Incoming Inter-eNB(via S1) Intra-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message from UE.
Sampling Point 12
Explanation
Updated
9.5.3.3.15 C373620685 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9-170
SJ-20121224143652-001|20130925(R1.6)
9.5.3.3.16 C373620686 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.17 C373620687 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.5.3.3.18 C373620688 Number of Outgoing Inter-eNB(via S1) Intra-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
9-171
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.5.3.3.19 C373620689 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Intra-freq handover preparation failures due to RRC
connection reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.5.3.3.20 C373620690 Number of Incoming Inter-eNB(via S1) Intra-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-172
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
Sampling Point 1: The eNodeB receives the MeasurementReport message from UE.
9-173
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Counter
Counter Name
Number
1
C373630900
C373630901
C373630902
C373630903
C373630940
C373630941
C373630942
C373630943
C373630980
10
C373630981
11
C373630982
12
C373630983
13
C373630984
14
C373630985
9-174
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
15
C373630986
16
C373630987
17
C373630988
18
C373630989
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.1.3.2 C373630901 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-175
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The source cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during the preparation of resources in
target cell. The source reports handover preparation failure.
Updated
9.6.1.3.3 C373630902 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to Dest
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Because the target cell in eNB has no enough resources, the source cell
reports handover preparation failure.
Updated
9.6.1.3.4 C373630903 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Because the source cell in eNB occurs other failure during handover
preparation , it reports handover preparation failure.
Updated
9-176
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.1.3.6 C373630941 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.1.3.7 C373630942 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-177
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover preparation indicating a
incoming intra-eNB handover failure.
Updated
9.6.1.3.8 C373630943 Number of Incoming Intra-eNB Inter-freq Handover Preparation Failure due to Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The targe cell in eNB occurs other failures during handover preparation
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source cell receives the UeContexRelease message from the
target cell.
Sampling Point 4
Explanation
9-178
SJ-20121224143652-001|20130925(R1.6)
Updated
9.6.1.3.10 C373630981 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The source cell in eNB has received the a RRCConnectionReestablishmentRequest message from the UE during handover execution indicating
a outgoing intra-eNB handover failure.
Updated
9.6.1.3.11 C373630982 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the source
report handover failure indicating a outgoing intra-eNB handover failure.
Updated
9.6.1.3.12 C373630983 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Other Cause
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in source cell.
Explanation
The source cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.1.3.14 C373630985 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to RRC Reconfig
Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-180
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9.6.1.3.15 C373630986 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to Dst occur
Re-establishment
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
The target cell in eNB has received the RRCConnectionReestablishmentRequest message from the UE during handover execution, the target
report handover failure indicating a incoming intra-eNB handover failure.
Updated
9.6.1.3.16 C373630987 Number of Incoming Intra-eNB Inter-freq Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB occurs handover execution failures due to other reason
in target cell.
Explanation
The targe cell in eNB occurs other failures during handover execution
indicating an incoming intra-eNB handover failure.
9-181
SJ-20121224143652-001|20130925(R1.6)
Updated
9.6.1.3.17 C373630988 Number of Outgoing Intra-eNB Inter-freq Handover Preparation Failure due to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.1.3.18 C373630989 Number of Outgoing Intra-eNB Inter-freq Handover Execution Failure due to Waiting
Reconfiguration Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires in target cell.
Sampling Point 5
Explanation
Updated
The counter is incremented by 1 when the eNodeB's timer of waiting for the
RRCConnectionReconfigurationComplete message expires in target cell.
9-182
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequest message to the
target eNodeB.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the source eNodeB.
Sampling Point 3: The source eNodeB receives the HandoverRequestAcknowledge
message from the target eNodeB.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to the source eNodeB.
Sampling
Point
5:
The
source
eNodeB
occurs
timeout
for
HandoverRequestAcknowledge message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the target eNodeB.
9-183
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
l
l
l
9-184
SJ-20121224143652-001|20130925(R1.6)
Sampling
Point
20:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB X2 handover.
the
during
Counter
Counter Name
Number
1
C373641200
C373641201
C373641202
C373641203
C373641204
C373641240
C373641241
C373641242
C373641243
10
C373641280
11
C373641281
12
C373641282
13
C373641283
14
C373641284
15
C373641285
9-185
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
16
C373641286
17
C373641287
18
C373641288
19
C373641289
20
C373641290
21
C373641291
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-186
SJ-20121224143652-001|20130925(R1.6)
9.6.2.3.2 C373641201 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
HO Request ACK Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.2.3.3 C373641202 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Dest Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-187
SJ-20121224143652-001|20130925(R1.6)
9.6.2.3.4 C373641203 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.2.3.5 C373641204 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.2.3.6 C373641240 Number of Successful Incoming Inter-eNB(via X2) Inter-freq Handover Preparation
Definition
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover Request Ack message to the
source eNodeB.
Sampling Point 4
Explanation
Updated
9.6.2.3.7 C373641241 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.2.3.8 C373641242 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Inter-freq handover preparation failures due to source
cancle handover.
9-189
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
Explanation
Updated
9.6.2.3.9 C373641243 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.6.2.3.10 C373641280 Number of Successful Outgoing Inter-eNB(via X2) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-190
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.6.2.3.11 C373641281 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 20
Explanation
Updated
9.6.2.3.12 C373641282 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-191
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.6.2.3.13 C373641283 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.6.2.3.14 C373641284 Number of Successful Incoming Inter-eNB(via X2) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-192
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.2.3.15 C373641285 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 10
Explanation
Updated
9.6.2.3.16 C373641286 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Path Switch Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-193
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.2.3.17 C373641287 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.6.2.3.18 C373641288 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives Handover Cancel message from the
source eNodeB.
9-194
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.2.3.19 C373641289 Number of Outgoing Inter-eNB(via X2) Inter-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.2.3.20 C373641290 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via X2) Inter-freq handover preparation failures due to RRC
connection reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
9-195
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.2.3.21 C373641291 Number of Incoming Inter-eNB(via X2) Inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-196
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-197
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373651500
C373651501
9-198
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373651502
C373651503
C373651504
C373651540
C373651541
C373651542
C373651543
10
C373651580
11
C373651581
12
C373651582
13
C373651583
14
C373651584
15
C373651585
16
C373651586
17
C373651587
18
C373651588
19
C373651589
20
C373651590
9-199
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.2 C373651501 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-200
SJ-20121224143652-001|20130925(R1.6)
9.6.3.3.3 C373651502 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Dst Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.4 C373651503 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.5 C373651504 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
9-201
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.6 C373651540 Number of Successful Incoming Inter-eNB(via S1) Inter-freq Handover Preparation
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.7 C373651541 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-202
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.6.3.3.8 C373651542 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Source Cancel HO
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Inter-freq handover preparation failures due to source
cancle handover.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.9 C373651543 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-203
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
9.6.3.3.10 C373651580 Number of Successful Outgoing Inter-eNB(via S1) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.11 C373651581 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Re-estabilshment to Source eNodeB
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 15
9-204
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.3.3.12 C373651582 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.13 C373651583 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
9-205
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.6.3.3.14 C373651584 Number of Successful Incoming Inter-eNB(via S1) Inter-freq Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message from UE.
Sampling Point 12
Explanation
Updated
9.6.3.3.15 C373651585 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
RRC Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
9-206
SJ-20121224143652-001|20130925(R1.6)
Updated
9.6.3.3.16 C373651586 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Source Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.17 C373651587 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9-207
SJ-20121224143652-001|20130925(R1.6)
9.6.3.3.18 C373651588 Number of Outgoing Inter-eNB(via S1) Inter-freq Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.6.3.3.19 C373651589 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Preparation Failure due to
Re-estabilshment to Target Cell
Definition
The counter is used to count the number of times that the incoming
Inter-eNB(via S1) Inter-freq handover preparation failures due to RRC
connection reestablishment in destination.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-208
SJ-20121224143652-001|20130925(R1.6)
9.6.3.3.20 C373651590 Number of Incoming Inter-eNB(via S1) Inter-freq Handover Execution Failure due to
Re-estabilshment to Target Cell
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9-209
SJ-20121224143652-001|20130925(R1.6)
9-210
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-211
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373661800
C373661801
9-212
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373661802
C373661803
C373661804
C373661805
C373661806
C373661807
C373661808
10
C373661809
11
C373661810
12
C373661811
13
C373661812
14
C373661813
15
C373661814
16
C373661815
17
C373661816
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.1.3.2 C373661801 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 6
Explanation
Updated
9.7.1.3.3 C373661802 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-214
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.1.3.4 C373661803 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-215
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
9.7.1.3.6 C373661805 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 11
Explanation
Updated
9.7.1.3.7 C373661806 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-216
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.7.1.3.8 C373661807 Number of Incoming Inter-RAT(UTRAN to LTE) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.7.1.3.10 C373661809 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
HO Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.1.3.11 C373661810 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
Dst Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
9.7.1.3.12 C373661811 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due to
Other Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-219
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Explanation
Updated
9.7.1.3.15 C373661814 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.1.3.16 C373661815 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-220
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.7.1.3.17 C373661816 Number of Outgoing Inter-RAT(LTE to UTRAN) Handover Preparation Failure due
to User Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-221
SJ-20121224143652-001|20130925(R1.6)
9-222
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-223
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373672100
C373672101
9-224
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373672102
C373672103
C373672104
C373672105
C373672106
C373672107
C373672108
10
C373672109
11
C373672110
12
C373672111
13
C373672112
14
C373672113
15
C373672114
16
C373672115
17
C373672116
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.2.3.2 C373672101 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to
Resource Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Explanation
Updated
9.7.2.3.3 C373672102 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
9-226
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.2.3.4 C373672103 Number of Incoming Inter-RAT(CDMA to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-227
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message from UE.
Sampling Point 10
Explanation
Updated
9.7.2.3.6 C373672105 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 6
Explanation
Updated
9.7.2.3.7 C373672106 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-228
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.7.2.3.8 C373672107 Number of Incoming Inter-RAT(CDMA to LTE) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.7.2.3.10 C373672109 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to HO
Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.2.3.11 C373672110 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to Dst
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-230
SJ-20121224143652-001|20130925(R1.6)
9.7.2.3.12 C373672111 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-231
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 5
Explanation
Updated
9.7.2.3.15 C373672114 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.2.3.16 C373672115 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-232
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.7.2.3.17 C373672116 Number of Outgoing Inter-RAT(LTE to CDMA) Handover Preparation Failure due to User
Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-233
SJ-20121224143652-001|20130925(R1.6)
9-234
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
l
l
l
Sampling Point 1: The source eNodeB sends the HandoverRequired message to the
MME.
Sampling Point 2: The target eNodeB receives the HandoverRequest message from
the MME.
Sampling Point 3: The source eNodeB receives the HandoverCommand message
from the MME.
Sampling Point 4: The target eNodeB sends the HandoverRequestAcknowledge
message to MME.
Sampling Point 5: The source eNodeB occurs timeout for HandoverCommand
message.
Sampling Point 6: The source eNodeB receives the HandoverPreprationFailure
message from the MME.
Sampling Point 7: The target eNodeB sends the HandoverFailure message to the
MME.
Sampling Point 8: The source eNodeB sends the RRCConnectionReconfiguration
message to UE.
9-235
SJ-20121224143652-001|20130925(R1.6)
l
l
l
l
l
Sampling
Point
10:
The
target
eNodeB
receives
the
RRCConnectionReconfigurationComplete message from UE.
Sampling
Point
11:
The
target
eNodeB
occurs
timeout
for
RRCConnectionReconfigurationComplete.
Sampling Point 12: The target eNodeB sends the HandoverNotify message to the
MME.
Sampling Point 13: The source eNodeB receives the UEContextReleaseCommand
message from the MME.
Sampling
Point
14:
The
source
eNodeB
occurs
timeout
for
UEContextReleaseCommand message.
Sampling
Point
15:
The
eNodeB
receives
RRCConnectionReestablishmentRequest
message
from
UE
inter-eNB S1 handover.
the
during
Counter
Counter Name
Number
1
C373682400
C373682401
9-236
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373682402
C373682403
C373682404
C373682405
C373682406
C373682407
C373682408
10
C373682409
11
C373682410
12
C373682411
13
C373682412
14
C373682413
15
C373682414
16
C373682415
17
C373682416
Sampling Interval
Event triggered
9-237
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.3.3.2 C373682401 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Resource
Allocation Fail
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB sends Handover failure message to the MME
due to admission failures.
Sampling Point 14
Explanation
Updated
9.7.3.3.3 C373682402 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-238
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.3.3.4 C373682403 Number of Incoming Inter-RAT(GSM- to LTE) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover preparation failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB receives the RRCConnectionReconfigurationComplete message from UE.
Sampling Point 4
9-239
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.7.3.3.6 C373682405 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to RRC
Reconfig Complete Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB's timer of waiting for the RRCConnectionReconfigurationComplete message expires.
Sampling Point 6
Explanation
Updated
9.7.3.3.7 C373682406 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to Source
Cancel HO
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.7.3.3.8 C373682407 Number of Incoming Inter-RAT(GSM- to LTE) Handover Execution Failure due to Other Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the target eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-241
SJ-20121224143652-001|20130925(R1.6)
9.7.3.3.10 C373682409 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to HO
Command Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.3.3.11 C373682410 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to Dst
Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-242
SJ-20121224143652-001|20130925(R1.6)
9.7.3.3.12 C373682411 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to Other
Reason
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-243
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB receives the RRCConnectionReestablishmentRequest message from the UE.
Sampling Point 5
Explanation
Updated
9.7.3.3.15 C373682414 Number of Outgoing Inter-RAT(LTE to GSM) Handover Execution Failure due to UE
Context Release Timeout
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.7.3.3.16 C373682415 Number of Outgoing Inter-RAT(LTE to GSM) Handover Execution Failure due to Other
Cause
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-244
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
When the source eNodeB occurs handover execution failures due to other
reason.
Explanation
Updated
9.7.3.3.17 C373682416 Number of Outgoing Inter-RAT(LTE to GSM) Handover Preparation Failure due to User
Inactivity
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9-245
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373661817
C373661818
C373661819
C373661820
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.8.1.3.2 C373661818 Number of Outgoing Inter-RAT(LTE to UTRAN) SRVCC Handover Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-246
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.8.1.3.3 C373661819 Number of Successful Outgoing Inter-RAT(LTE to UTRAN) SRVCC Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.8.1.3.4 C373661820 Number of Outgoing Inter-RAT(LTE to UTRAN) SRVCC Handover Execution Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source cell handover fails for SRVCC from LTE to UTRAN.
9-247
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Counter
Counter Name
Number
1
C373682417
C373682418
C373682419
C373682420
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-248
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
9.8.2.3.2 C373682418 Number of Outgoing Inter-RAT(LTE to GSM) SRVCC Handover Preparation Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
Updated
9.8.2.3.3 C373682419 Number of Successful Outgoing Inter-RAT(LTE to GSM) SRVCC Handover Execution
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
SJ-20121224143652-001|20130925(R1.6)
Updated
9.8.2.3.4 C373682420 Number of Outgoing Inter-RAT(LTE to GSM) SRVCC Handover Execution Failure
Definition
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
When the source cell handover fails for SRVCC from LTE to GSM.
Explanation
Updated
Sampling Point 1: When the eNodeB receives the MeasurementReport message from
UE, eNodeB judges to trigger handover.
9-250
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373743400
C373743401
C373743402
C373743403
C373743404
C373743405
Report Times of RSRP Value in the range of -140 to -121 of Serving Cell
C373743406
Report Times of RSRP Value in the range of -120 to -116 of Serving Cell
C373743407
Report Times of RSRP Value in the range of -115 to -111 of Serving Cell
C373743408
Report Times of RSRP Value in the range of -110 to -106 of Serving Cell
10
C373743409
Report Times of RSRP Value in the range of -105 to -101 of Serving Cell
11
C373743410
Report Times of RSRP Value in the range of -100 to -96 of Serving Cell
12
C373743411
Report Times of RSRP Value in the range of -95 to -91 of Serving Cell
13
C373743412
Report Times of RSRP Value in the range of -90 to -86 of Serving Cell
14
C373743413
Report Times of RSRP Value in the range of -85 to -81 of Serving Cell
15
C373743414
Report Times of RSRP Value in the range of -80 to -76 of Serving Cell
16
C373743415
Report Times of RSRP Value in the range of -75 to -71 of Serving Cell
17
C373743416
Report Times of RSRP Value in the range of -70 to -61 of Serving Cell
18
C373743417
Report Times of RSRP Value in the range of -60 to -43 of Serving Cell
19
C373743500
20
C373743501
21
C373743502
22
C373743503
23
C373743504
Report Times of RSRQ Value in the range of -20 to -18 of Serving Cell
24
C373743505
Report Times of RSRQ Value in the range of -17 to -15 of Serving Cell
25
C373743506
Report Times of RSRQ Value in the range of -14 to -12 of Serving Cell
26
C373743507
27
C373743508
28
C373743509
9-251
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum RSRP value of the serving cell
reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Maximum
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1.
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
maximum of all collected value.
Updated
The counter is replaced with the current value when the current RSRP
value is larger than the prior at sampling point.
The counter is used to count the minimum RSRP value of the serving cell
reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Minimum
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1.
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
minimum of all collected value.
Updated
The counter is replaced with the current value when the current RSRP
value is smaller than the prior at sampling point.
The counter is used to count the average RSRP value of the serving cell
reported in the UE measurement reports that triggered HO.
9-252
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Average
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP value, and
then dividing the sum by the measurement period.
9.9.1.3.4 C373743403 Sum of RSRP Value in the range of -140 to -91 of Serving Cell
Definition
The counter is used to count the average RSRP linear value of quality of
the serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
1E-14mW
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP linear value,
and then dividing the sum by the measurement period.
9.9.1.3.5 C373743404 Sum of RSRP Value in the range of -90 to -43 of Serving Cell
Definition
The counter is used to count the average RSRP linear value of quality of
the serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
1E-9mW
Measurement Object
EUtran Relation
9-253
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP linear value,
and then dividing the sum by the measurement period.
9.9.1.3.6 C373743405 Report Times of RSRP Value in the range of -140 to -121 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-140 to -121)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-140 to -121).
Updated
9.9.1.3.7 C373743406 Report Times of RSRP Value in the range of -120 to -116 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-120 to -116)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-254
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-120 to -116).
Updated
9.9.1.3.8 C373743407 Report Times of RSRP Value in the range of -115 to -111 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-115 to -111)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-115 to -111).
Updated
9.9.1.3.9 C373743408 Report Times of RSRP Value in the range of -110 to -106 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-110 to -106)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-255
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-110 to -106).
Updated
9.9.1.3.10 C373743409 Report Times of RSRP Value in the range of -105 to -101 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-105 to -101)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-105 to -101).
Updated
9.9.1.3.11 C373743410 Report Times of RSRP Value in the range of -100 to -96 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-100 to -96)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
9-256
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-100 to -96).
Updated
9.9.1.3.12 C373743411 Report Times of RSRP Value in the range of -95 to -91 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-95 to -91)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-95 to -91).
Updated
9.9.1.3.13 C373743412 Report Times of RSRP Value in the range of -90 to -86 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-90 to -86)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
9-257
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-90 to -86).
Updated
9.9.1.3.14 C373743413 Report Times of RSRP Value in the range of -85 to -81 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-85 to -81)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-85 to -81).
Updated
9.9.1.3.15 C373743414 Report Times of RSRP Value in the range of -80 to -76 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-80 to -76)of the
serving cell reported in the UE measurement reports that triggered HO.
9-258
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-80 to -76).
Updated
9.9.1.3.16 C373743415 Report Times of RSRP Value in the range of -75 to -71 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-75 to -71)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-75 to -71).
Updated
9-259
SJ-20121224143652-001|20130925(R1.6)
9.9.1.3.17 C373743416 Report Times of RSRP Value in the range of -70 to -61 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-70 to -61)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-70 to -61).
Updated
9.9.1.3.18 C373743417 Report Times of RSRP Value in the range of -60 to -43 of Serving Cell
Definition
The counter is used to count the times of RSRP value (-60 to -43)of the
serving cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRP value (-60 to -43).
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum RSRQ value of quality of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Maximum
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
maximum of all collected value.
Updated
The counter is replaced with the current value when the current RSRQ
value is larger than the prior at sampling point.
The counter is used to count the minimum RSRQ value of quality of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Minimum
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
minimum of all collected value.
Updated
The counter is replaced with the current value when the current RSRQ
value is smaller than the prior at sampling point.
The counter is used to count the average RSRQ value of quality of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
9-261
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRQ value, and
then dividing the sum by the measurement period.
The counter is used to count the linear average RSRQ value of quality of
the serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Average
Unit
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
linear average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRQ linear value,
and then dividing the sum by the measurement period.
9.9.1.3.23 C373743504 Report Times of RSRQ Value in the range of -20 to -18 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-20 to -18)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
9-262
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-20 to -18).
Updated
9.9.1.3.24 C373743505 Report Times of RSRQ Value in the range of -17 to -15 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-17 to -15)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-17 to -15).
Updated
9.9.1.3.25 C373743506 Report Times of RSRQ Value in the range of -14 to -12 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-14 to -12)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-263
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-14 to -12).
Updated
9.9.1.3.26 C373743507 Report Times of RSRQ Value in the range of -11 to -9 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-11 to -9)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-11 to -9).
Updated
9.9.1.3.27 C373743508 Report Times of RSRQ Value in the range of -8 to -6 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-8 to -6)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
9-264
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-8 to -6).
Updated
9.9.1.3.28 C373743509 Report Times of RSRQ Value in the range of -5 to -3 of Serving Cell
Definition
The counter is used to count the times of RSRQ value (-5 to -3)of the
serving cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the serving cell in the message is collected. The counter records the
number of the RSRQ value (-5 to -3).
Updated
9-265
SJ-20121224143652-001|20130925(R1.6)
Sampling Point 1: When the eNodeB receives the MeasurementReport message from
UE, eNodeB judges to trigger handover.
Counter
Counter Name
Number
1
C373743418
C373743419
C373743420
C373743421
C373743422
C373743423
Report Times of RSRP Value in the range of -140 to -121 of Target Cell
C373743424
Report Times of RSRP Value in the range of -120 to -116 of Target Cell
C373743425
Report Times of RSRP Value in the range of -115 to -111 of Target Cell
C373743426
Report Times of RSRP Value in the range of -110 to -106 of Target Cell
10
C373743427
Report Times of RSRP Value in the range of -105 to -101 of Target Cell
11
C373743428
Report Times of RSRP Value in the range of -100 to -96 of Target Cell
12
C373743429
Report Times of RSRP Value in the range of -95 to -91 of Target Cell
13
C373743430
Report Times of RSRP Value in the range of -90 to -86 of Target Cell
14
C373743431
Report Times of RSRP Value in the range of -85 to -81 of Target Cell
15
C373743432
Report Times of RSRP Value in the range of -80 to -76 of Target Cell
16
C373743433
Report Times of RSRP Value in the range of -75 to -71 of Target Cell
9-266
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
17
C373743434
Report Times of RSRP Value in the range of -70 to -61 of Target Cell
18
C373743435
Report Times of RSRP Value in the range of -60 to -43 of Target Cell
19
C373743510
20
C373743511
21
C373743512
22
C373743513
23
C373743514
Report Times of RSRQ Value in the range of -20 to -18 of Target Cell
24
C373743515
Report Times of RSRQ Value in the range of -17 to -15 of Target Cell
25
C373743516
Report Times of RSRQ Value in the range of -14 to -12 of Target Cell
26
C373743517
27
C373743518
28
C373743519
Sampling Interval
Event triggered
Counter Type
Maximum
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1.
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
maximum of all collected value.
Updated
The counter is replaced with the current value when the current RSRP
value is larger than the prior at sampling point.
9-267
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Minimum
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1.
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
minimum of all collected value.
Updated
The counter is replaced with the current value when the current RSRP
value is smaller than the prior at sampling point.
Sampling Interval
Event triggered
Counter Type
Average
Unit
dBm
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1.
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP value, and
then dividing the sum by the measurement period.
9-268
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.4 C373743421 Sum of RSRP Value in the range of -140 to -91 of Target Cell
Definition
The counter is used to count the average RSRP linear value of quality of
the neigbor cell that triggered HO reported in the UE measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
1E-14mW
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP linear value,
and then dividing the sum by the measurement period.
9.9.2.3.5 C373743422 Sum of RSRP Value in the range of -90 to -43 of Target Cell
Definition
The counter is used to count the average RSRP linear value of quality
of the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
1E-9mW
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
average of all collected value.
Updated
The counter is updated by accumulating all the sample RSRP linear value,
and then dividing the sum by the measurement period.
9.9.2.3.6 C373743423 Report Times of RSRP Value in the range of -140 to -121 of Target Cell
Definition
The counter is used to count the times of RSRP value (-140 to -121)of the
neigbor cell reported in the UE measurement reports that triggered HO.
9-269
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-140 to -121).
Updated
9.9.2.3.7 C373743424 Report Times of RSRP Value in the range of -120 to -116 of Target Cell
Definition
The counter is used to count the times of RSRP value (-120 to -116)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-120 to -116).
Updated
9-270
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.8 C373743425 Report Times of RSRP Value in the range of -115 to -111 of Target Cell
Definition
The counter is used to count the times of RSRP value (-115 to -111)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-115 to -111).
Updated
9.9.2.3.9 C373743426 Report Times of RSRP Value in the range of -110 to -106 of Target Cell
Definition
The counter is used to count the times of RSRP value (-110 to -106)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-110 to -106).
Updated
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.10 C373743427 Report Times of RSRP Value in the range of -105 to -101 of Target Cell
Definition
The counter is used to count the times of RSRP value (-105 to -101)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-105 to -101).
Updated
9.9.2.3.11 C373743428 Report Times of RSRP Value in the range of -100 to -96 of Target Cell
Definition
The counter is used to count the times of RSRP value (-100 to -96)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-100 to -96).
Updated
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.12 C373743429 Report Times of RSRP Value in the range of -95 to -91 of Target Cell
Definition
The counter is used to count the times of RSRP value (-95 to -91)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-95 to -91).
Updated
9.9.2.3.13 C373743430 Report Times of RSRP Value in the range of -90 to -86 of Target Cell
Definition
The counter is used to count the times of RSRP value (-90 to -86)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-90 to -86).
Updated
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.14 C373743431 Report Times of RSRP Value in the range of -85 to -81 of Target Cell
Definition
The counter is used to count the times of RSRP value (-85 to -81)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-85 to -81).
Updated
9.9.2.3.15 C373743432 Report Times of RSRP Value in the range of -80 to -76 of Target Cell
Definition
The counter is used to count the times of RSRP value (-80 to -76)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-80 to -76).
Updated
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.16 C373743433 Report Times of RSRP Value in the range of -75 to -71 of Target Cell
Definition
The counter is used to count the times of RSRP value (-75 to -71)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-75 to -71).
Updated
9.9.2.3.17 C373743434 Report Times of RSRP Value in the range of -70 to -61 of Target Cell
Definition
The counter is used to count the times of RSRP value (-70 to -61)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-70 to -61).
Updated
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.18 C373743435 Report Times of RSRP Value in the range of -60 to -43 of Target Cell
Definition
The counter is used to count the times of RSRP value (-60 to -43)of the
neigbor cell reported in the UE measurement reports that triggered HO.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRP value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRP value (-60 to -43).
Updated
Sampling Interval
Event triggered
Counter Type
Maximum
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
maximum of all collected value.
Updated
The counter is replaced with the current value when the current RSRQ
value is larger than the prior at sampling point.
9-276
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Minimum
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
minimum of all collected value.
Updated
The counter is replaced with the current value when the current RSRQ
value is smaller than the prior at sampling point.
Sampling Interval
Event triggered
Counter Type
Average
Unit
dB
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
average of all collected value.
Updated
9-277
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the linear average RSRQ value of quality
of the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Average
Unit
Measurement Object
EUtran Relation
Sampling Point
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE.
Sampling Point 1
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
linear average of all collected value.
Updated
The counter is updated by accumulating all the sample linear RSRQ value,
and then dividing the sum by the measurement period.
9.9.2.3.23 C373743514 Report Times of RSRQ Value in the range of -20 to -18 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-20 to -18)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-20 to -18).
Updated
9-278
SJ-20121224143652-001|20130925(R1.6)
9.9.2.3.24 C373743515 Report Times of RSRQ Value in the range of -17 to -15 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-17 to -15)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-17 to -15).
Updated
9.9.2.3.25 C373743516 Report Times of RSRQ Value in the range of -14 to -12 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-14 to -12)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-14 to -12).
9-279
SJ-20121224143652-001|20130925(R1.6)
Updated
9.9.2.3.26 C373743517 Report Times of RSRQ Value in the range of -11 to -9 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-11 to -9)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-11 to -9).
Updated
9.9.2.3.27 C373743518 Report Times of RSRQ Value in the range of -8 to -6 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-8 to -6)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
9-280
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-8 to -6).
Updated
9.9.2.3.28 C373743519 Report Times of RSRQ Value in the range of -5 to -3 of Target Cell
Definition
The counter is used to count the times of RSRQ value (-5 to -3)of
the neigbor cell that triggered HO (target HO cell) reported in the UE
measurement reports.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
EUtran Relation
Sampling Point
Explanation
When the eNodeB judges to trigger intra-RAT handover after receiving the
MeasurementReport message from the UE, the RSRQ value of the quality
of the neigbor cell in the message is collected. The counter records the
number of the RSRQ value (-5 to -3).
Updated
9-281
SJ-20121224143652-001|20130925(R1.6)
l
l
Sampling Point 1: When the source eNodeB sends the HandoverRequest message
to target eNodeB.
Sampling Point 2: When the source eNodeB receives the UEContextRelease message to target eNodeB.
l
l
Sampling Point 3: When the source eNodeB sends the HandoverRequired message
to target eNodeB.
Sampling
Point
4:
When
the
source
eNodeB
receives
the
UEContextReleaseCommand message to target eNodeB.
Counter
Counter Name
Number
1
C373485130
C373485131
C373485132
Number of UE Handover
9-282
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Average
Unit
ms
Measurement Object
Cell
Sampling Point
When a UE successfully enter into the target cell from source cell via
handover,record the start time. When the UE again successfully get out
the cell via handover, record the end time. The handover resident time is
equal to the interval from the start to the end.
Explanation
The handover resident time indicates the UE staying time in a cell through
handover.
Updated
The counter is used to count the number of handover resident time short
threshold.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
9-283
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When a UE successfully enter into the target cell from source cell via
handover and again successfully get out the cell.
Explanation
Updated
Counter
Counter Name
Number
1
C373485181
C373485182
C373485183
C373485184
C373485185
C373485186
C373485187
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
8
C373485188
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
9-285
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-286
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
9-287
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
9-288
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
Explanation
Updated
Counter
Counter Name
Number
1
C373485189
C373485190
C373485191
C373485192
9-289
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
9-290
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
9-291
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the source eNodeB receives the RRCConnectionReconfigurationComplete message from UE in intra-eNB handover.
When the source eNodeB receives the UEContextRelease message from
the target eNodeB in inter-eNB X2 handover.
When the source eNodeB receives the UEContextReleaseCommand
message from the MME in inter-eNB S1 handover.
Explanation
Updated
9-292
SJ-20121224143652-001|20130925(R1.6)
Chapter 10
Counter
Counter Name
Number
1
C373374200
C373374201
C373374202
C373374203
C373374204
C373374205
C373374206
C373374207
C373374208
10
C373374209
10-1
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
11
C373374210
12
C373374211
13
C373374212
14
C373374213
15
C373374214
16
C373374215
17
C373374216
18
C373374217
19
C373374218
20
C373374219
21
C373374220
22
C373374221
23
C373374222
24
C373374223
25
C373374224
26
C373374225
27
C373374226
28
C373374227
29
C373374228
30
C373374229
31
C373374230
32
C373374231
33
C373374232
34
C373374233
35
C373374234
36
C373374235
37
C373374236
38
C373374237
39
C373374238
40
C373374239
41
C373374240
42
C373374241
10-2
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
43
C373374242
44
C373374243
The counter is used to count the average cell bit-rate of control plane
PDCP SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME.
Explanation
Updated
The counter is used to count the maximum cell bit-rate of control plane
PDCP SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME.
Explanation
Updated
The counter is replaced with the current value when the current UL PDCP
SDU volume is larger than the prior at sampling point.
10-3
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average cell bit-rate of control plane
PDCP SDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the PDCP SDU of signal radio bear from the
MME.
Explanation
Updated
The counter is used to count the maximum cell bit-rate of control plane
PDCP SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the PDCP SDU of signal radio bear from the
MME.
Explanation
Updated
The counter is replaced with the current value when the current DL SRB
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the average cell bit-rate of QCI1 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
10-4
SJ-20121224143652-001|20130925(R1.6)
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI2 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI3 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW.
10-5
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI4 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI5 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
10-6
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the average cell bit-rate of QCI6 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI7 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI8 PDCP
SDUs on the uplink.
10-7
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI9 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI1 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
10-8
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI2 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI3 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the
other eNodeB.
10-9
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI4 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI5 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the
other eNodeB.
10-10
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI6 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI7 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the
other eNodeB.
10-11
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI8 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI9 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the
other eNodeB.
10-12
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the maximum cell bit-rate of QCI1 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted.The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI2 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
10-13
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI3 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI4 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI5 PDCP
SDUs on the uplink.
10-14
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI6 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI7 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW.
10-15
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI8 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI9 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
10-16
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI1 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI2 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP SDU volume is larger than the prior at sampling point.
10-17
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell bit-rate of QCI3 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI4 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI5 PDCP
SDUs on the downlink.
Sampling Interval
1s
10-18
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI6 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI7 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
10-19
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI8 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI9 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the
other eNodeB.
10-20
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of PDCP SDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the PDCP SDU volume that is sent
by PDCP layer from the previous sampling time to the current sampling
time. PDCP SDUs that are forwarded over the X2/S1 to another eNodeB
during handover have been deducted. The counter provides the maximum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the PDCP SDU from the SGW or the other
eNodeB.
Explanation
10-21
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL PDCP
SDU volume is larger than the prior at sampling point.
The counter is used to count the average cell bit-rate of PDCP SDUs on
the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the PDCP SDU volume that is sent
by PDCP layer from the previous sampling time to the current sampling
time. PDCP SDUs that are forwarded over the X2/S1 to another eNodeB
during handover have been deducted. The counter provides the average
value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of PDCP SDUs on
the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB receives the PDCP SDU from the SGW or the other
eNodeB.
Explanation
Updated
10-22
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373343600
C373343601
C373343602
C373343603
C373343604
C373343605
C373343606
C373343607
C373343608
10
C373343609
11
C373343610
12
C373343611
10-23
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
13
C373343612
14
C373343613
15
C373343614
16
C373343615
17
C373343616
18
C373343617
19
C373343618
20
C373343619
21
C373343620
22
C373343621
23
C373343622
24
C373343623
25
C373343624
26
C373343625
27
C373343626
28
C373343627
29
C373343628
30
C373343629
31
C373343630
32
C373343631
33
C373343632
34
C373343633
35
C373343634
36
C373343635
37
C373343636
38
C373343637
39
C373343638
40
C373343639
41
C373343640
42
C373343641
43
C373343642
44
C373343643
10-24
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
45
C373343644
46
C373343645
47
C373343646
48
C373343647
49
C373343648
50
C373343649
51
C373343650
52
C373343651
53
C373343652
54
C373343653
55
C373343654
56
C373343655
57
C373343656
58
C373343657
59
C373343658
60
C373343659
The counter is used to count the maximum cell throughput of PDCP PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL PDCP
PDU volume is larger than the prior at sampling point.
10-25
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of PDCP PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL PDCP
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of PDCP PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
10-26
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that
includes the DRB's and SRB's and is received by PDCP layer from RLC
layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that
includes the DRB's and SRB's and is received by PDCP layer from RLC
layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
10-27
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is received by PDCP layer from RLC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the maximum cell throughput of QCI1 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
10-28
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI1 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 PDCP
PDUs on the uplink.
10-29
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
10-30
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
10-31
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI2 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 PDCP
PDUs on the uplink.
10-32
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
10-33
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI3 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
10-34
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI4 PDCP
PDUs on the downlink.
10-35
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
10-36
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI4 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
10-37
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI5 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 PDCP
PDUs on the downlink.
10-38
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
10-39
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
10-40
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI6 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 PDCP
PDUs on the downlink.
10-41
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
10-42
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI7 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
10-43
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI7 PDCP
PDUs on the uplink.
10-44
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
10-45
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI8 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
10-46
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI8 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 PDCP
PDUs on the uplink.
10-47
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
10-48
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
10-49
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI9 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 PDCP
PDUs on the uplink.
10-50
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
10-51
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373343660
C373343661
C373343662
C373343663
C373343664
C373343665
C373343666
C373343667
C373343668
10
C373343669
11
C373343670
12
C373343671
13
C373343672
14
C373343673
15
C373343674
16
C373343675
17
C373343676
18
C373343677
19
C373343678
20
C373343679
21
C373343680
22
C373343681
23
C373343682
24
C373343683
25
C373343684
26
C373343685
27
C373343686
28
C373343687
29
C373343688
30
C373343689
31
C373343690
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
32
C373343691
33
C373343692
34
C373343693
35
C373343694
36
C373343695
37
C373343696
38
C373343697
39
C373343698
40
C373343699
41
C373343700
42
C373343701
43
C373343702
44
C373343703
45
C373343704
46
C373343705
47
C373343706
48
C373343707
49
C373343708
50
C373343709
51
C373343710
52
C373343711
53
C373343712
54
C373343713
55
C373343714
56
C373343715
57
C373343716
58
C373343717
59
C373343718
60
C373343719
10-53
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL RLC
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU.The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL RLC
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
10-54
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from the
previous sampling time to the current sampling time. The volume includes
retransmission's PDU. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL RLC
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
10-55
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from the
previous sampling time to the current sampling time. The volume includes
retransmission's PDU. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL RLC
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from
the previous sampling time to the current sampling time. The volume
includes retransmission's PDU. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that is
sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The
counter provides the maximum value in the measurement period.
10-56
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI1
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI1 RLC PDU
volume, and then dividing the sum by the measurement period.
10-57
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
10-58
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI1 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
10-59
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI2 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
10-60
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI2
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI2 RLC PDU
volume, and then dividing the sum by the measurement period.
10-61
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
10-62
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI3 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
10-63
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI3 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
10-64
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI4
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI4 RLC PDU
volume, and then dividing the sum by the measurement period.
10-65
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
10-66
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI4 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
10-67
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI5 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
10-68
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI5
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI5 RLC PDU
volume, and then dividing the sum by the measurement period.
10-69
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
10-70
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI6 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
10-71
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI6 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
10-72
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI7
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI7 RLC PDU
volume, and then dividing the sum by the measurement period.
10-73
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
10-74
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI7 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
10-75
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI8 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
10-76
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI8
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI8 RLC PDU
volume, and then dividing the sum by the measurement period.
10-77
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
10-78
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time.The volume
includes retransmission's PDU. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is updated by accumulating all the sample DL QCI9 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
10-79
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI9 RLC PDU
volume, and then dividing the sum by the measurement period.
10-80
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373343720
C373343721
C373343722
C373343723
C373343724
C373343725
The counter is used to count the maximum cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
10-81
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL MAC
TB volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
average value in the measurement period.
Updated
The counter is replaced with the current value when the current DL MAC
TB volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
maximum value in the measurement period.
10-82
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of MAC TBs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL MAC
TB volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of MAC TBs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the average value in the measurement period.
Updated
The counter is replaced with the current value when the current UL MAC
TB volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of MAC TBs
on the uplink.
10-83
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Updated
Counter
Counter Name
Number
1
C373343732
C373343733
C373343734
C373343735
C373343736
C373343737
C373343792
C373343793
C373343794
10
C373343795
10-84
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell throughput of PHY data
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
Explanation
Downlink PHY Traffic on the Sampling Point = the size of TBs. The counter
takes the maximum value of all sampling granularities in the statistical
period.
Updated
The counter is updated to the sampling value if it is higher than the current
one.
The counter is used to count the minimum cell throughput of PHY data
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Kbps
Measurement Object
Cell
Sampling Point
Explanation
Downlink PHY Traffic on the Sampling Point = the size of TBs. That
includes retransmission TBs. The counter takes the minimum value of all
sampling granularities in the statistical period.
Updated
The counter is updated to the sampling value if it is lower than the current
one.
The counter is used to count the average cell throughput of PHY data
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
10-85
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
The counter is used to count the maximum cell throughput of PHY data
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB physical layer receives data from the air.
Explanation
Uplink PHY Traffic on the Sampling Point = the size of TBs.That includes
retransmission TBs.The counter takes the maximum value of all sampling
granularities in the statistical period.
Updated
The counter is updated to the sampling value if it is larger than the current
one.
The counter is used to count the minimum cell throughput of PHY data
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB physical layer receives data from the air.
Explanation
Uplink PHY Traffic on the Sampling Point = the size of TBs. That includes
retransmission TBs.The counter takes the minimum value of all sampling
granularities in the statistical period.
Updated
The counter is updated to the sampling value if it is lower than the current
one.
The counter is used to count the average cell throughput of PHY data
on the uplink.
10-86
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB physical layer receives data from the air.
Explanation
Uplink PHY traffic on the sampling point = the size of TBs. That includes
retransmission TBs.The counter takes the average value of all sampling
granularities in the statistical period.
Updated
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When there are downlink data to be sent on the PHY,and the threshold
requirements for RSRP and SINR must be satisfied.These threshold
values can be set in OMC windows, and the default threshold requirements
are: RSRP > Threshold for RSRP Statistics and SINR > Threshold for
DL SINR Statistics.
Explanation
Downlink PHY Traffic on the Sampling Point = the size of TBs. when
threshold for RSRP and SINR Statistics is satisfied. The counter takes the
maximum value of all sampling granularities in the statistical period.
Updated
The counter is updated to the sampling value if it is larger than the current
one.
The counter is used to count the average DL PHY throughput within the
threshold.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
10-87
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When there are downlink data to be sent on the PHY channelfrom the
MAC layer, and the threshold requirements for RSRP and DL SINR must
be satisfied.
Explanation
Updated
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the uplink PHY receives the data, and the threshold requirements
for RSRP and SINR must be satisfied. Users can set these threshold
values, and the default threshold requirements are: RSRP > Threshold for
RSRP Statistics and SINR > Threshold for DL SINR Statistics.
Explanation
Uplink PHY Traffic on the Sampling Point = the size of TBs.when threshold
for RSRP and SINR Statistics is satisfied. The counter takes the maximum
value of all sampling granularities in the statistical period.
Updated
The counter is updated to the sampling value if it is larger than the current
one.
The counter is used to count the average UL PHY throughput within the
threshold.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the uplink PHY receives the data, and the threshold requirements
for RSRP and DL SINR must be satisfied.
10-88
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Counter
Counter Name
Number
1
C373343726
C373343727
C373343728
C373343729
C373343730
C373343731
C373343800
C373343801
C373343802
10
C373343803
The counter is used to count the cell bit-size of MAC TBs on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
10-89
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB downlink scheduler get positively acknowledged for the
transmitted transport block over the air.
Explanation
Updated
The counter is used to count the cell part bit-size of MAC TBs on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB downlink scheduler get positively acknowledged for the
transmitted transport block over the air.
Explanation
Updated
The counter is used to count the cell part bit-size of MAC TBs on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
10-90
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB uplink scheduler get positively acknowledged for the
transmitted transport block by UE.
Explanation
Updated
The counter is used to count the cell part bit-size of MAC TBs on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB uplink scheduler get positively acknowledged for the
transmitted transport block by UE.
Explanation
Updated
The counter is used to count the sum of TTI to transmit TBs on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
10-91
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the DL TTI which has data scheduling.When the
eNodeB downlink scheduler schedule the transport block, one TTI is added
to the counter including the TTI of retransmission TB.
Updated
The counter is used to count the sum of TTI to transmit TBs on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the UL TTI which has data scheduling.When the
eNodeB uplink scheduler schedule the transport block, one TTI is added to
the counter including the TTI of retransmission TB.
Updated
The counter is used to count the part of TBs transmitted on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB uplink scheduler get negative acknowledged for the
transmitted transport block by UE.
Explanation
Updated
The counter is used to count the other part of TBs transmitted on the uplink.
Sampling Interval
15 min
10-92
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB uplink scheduler get negative acknowledged for the
transmitted transport block by UE.
Explanation
Updated
The counter is used to count the part of TBs transmitted on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB downlink scheduler get negative acknowledged for the
transmitted transport block over the air.
Explanation
Updated
The counter is used to count the other part of TBs transmitted on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When the eNodeB downlink scheduler get negative acknowledged for the
transmitted transport block over the air.
10-93
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
10.1.7 IP Throughput
10.1.7.1 Flow Charts and Sampling Points
Throughput of PDCP SDU bits in downlink for packet sizes or data bursts that are large
enough to require transmissions to be split across several TTIs, by excluding transmission
of the last piece of data in a data burst. Only data transmission time is considered, i.e.
when data transmission over Uu has begun but not yet finished. Each measurement is a
real value representing the throughput in kbits/s. The measurement is performed per QCI
per UE. For successful reception, the reference point is MAC upper SAP.
Counter
Counter Name
Number
1
C373343738
C373343739
C373343740
C373343741
C373343742
C373343743
C373343744
C373343745
C373343746
10
C373343747
11
C373343748
12
C373343749
13
C373343750
14
C373343751
15
C373343752
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
16
C373343753
17
C373343754
18
C373343755
19
C373343756
20
C373343757
21
C373343758
22
C373343759
23
C373343760
24
C373343761
25
C373343762
26
C373343763
27
C373343764
28
C373343765
29
C373343766
30
C373343767
31
C373343768
32
C373343769
33
C373343770
34
C373343771
35
C373343772
36
C373343773
37
C373343774
38
C373343775
39
C373343776
40
C373343777
41
C373343778
42
C373343779
43
C373343780
44
C373343781
45
C373343782
46
C373343783
47
C373343784
10-95
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
48
C373343785
49
C373343786
50
C373343787
51
C373343788
52
C373343789
53
C373343790
54
C373343791
55
C373343804
56
C373343805
57
C373343806
58
C373343807
The counter is used to count the cell part bit-size of QCI1 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI1 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
10-96
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the cell part bit-size of QCI1 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI1 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI1 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI1 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI1 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI1 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
The counter is used to count the cell part bit-size of QCI2 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
10-97
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI2 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI2 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI2 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI2 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI2 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
10-98
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI2 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI3 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI3 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI3 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
10-99
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the other part volume of QCI3 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI3 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI3 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI3 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI4 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI4 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
10-100
SJ-20121224143652-001|20130925(R1.6)
Updated
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI4 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI4 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI4 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI4 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI4 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
10-101
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the cell part bit-size of QCI5 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI5 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI5 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI5 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI5 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
10-102
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the time to transmit a QCI5 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI5 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI6 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI6 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI6 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
10-103
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI6 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI6 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI6 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI6 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI7 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
10-104
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the part volume of QCI7 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI7 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI7 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI7 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI7 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI7 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
10-105
SJ-20121224143652-001|20130925(R1.6)
Updated
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI8 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI8 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI8 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI8 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI8 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
10-106
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the time to transmit a QCI8 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI8 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI9 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the part volume of QCI9 PDCP SDU transmitted by
eNodeB to UE on the downlink.The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of QCI9 PDCP SDUs
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
10-107
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of QCI9 PDCP SDU
transmitted by eNodeB to UE on the downlink. The total volume = volume
High + Volume Low. When the eNodeB get the successful DL TB HARQ
feedback and all frag of PDCP SDU related to TB have been transmitted to
the air interface successfully,the counter is collected.
Updated
When all packets of a QCI9 PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the time to transmit a QCI9 data burst on
the downlink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink.
Explanation
The eNodeB collects the time of QCI9 traffic buffer from buffered data to
empty on the downlink on the downlink at sampling period.
Updated
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface
on the downlink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI1 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI1 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
10-108
SJ-20121224143652-001|20130925(R1.6)
Updated
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI1 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI1 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI1 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI1 data burst on
the uplink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI1 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI1 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
The counter is used to count the cell part bit-size of QCI2 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
10-109
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI2 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI2 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI2 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI2 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI2 data burst on
the uplink
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI2 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI2 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
10-110
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the cell part bit-size of QCI3 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI3 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI3 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI3 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI3 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI3 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
10-111
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI3 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI3 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI4 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI4 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI4 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI4 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI4 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
10-112
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the time to transmit a QCI4 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI4 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI4 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI5 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI5 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI5 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
10-113
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the other part volume of QCI5 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI5 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI5 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI5 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI5 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI6 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI6 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI6 PDCP SDUs
on the uplink.
Sampling Interval
15 min
10-114
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI6 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI6 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI6 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI6 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI6 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI7 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI7 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
10-115
SJ-20121224143652-001|20130925(R1.6)
Updated
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI7 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI7 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI7 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI7 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI7 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI7 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of QCI8 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
10-116
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI8 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI8 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI8 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI8 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI8 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI8 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI8 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
10-117
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the cell part bit-size of QCI9 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the part volume of QCI9 PDCP SDU transmitted by
eNodeB to UE on the uplink.The total volume = volume High + Volume Low.
Updated
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of QCI9 PDCP SDUs
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer
on the uplink.
Explanation
The counter provides the other part volume of QCI9 PDCP SDU
transmitted by eNodeB to UE on the uplink. The total volume = volume
High + Volume Low.
Updated
When a QCI9 PDCP SDU are received by PDCP layer from RLC layer on
the uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the time to transmit a QCI9 data burst on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
10-118
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink.
Explanation
The eNodeB collects the time of QCI9 traffic buffer from buffered data to
empty on the uplink at sampling period.
Updated
When a QCI9 PDCP SDU are scheduled by the eNodeB over air interface
on the uplink,the counter is incremented by 1.
The counter is used to count the cell part bit-size of PDCP SDUs on the
uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When a PDCP SDU are received by PDCP layer from RLC layer on the
uplink.
Explanation
Updated
When a PDCP SDU are received by PDCP layer from RLC layer on the
uplink,the counter is incremented by the bit-size of the PDCP SDU.
The counter is used to count the cell part bit-size of PDCP SDUs on the
uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Kbit
Measurement Object
Cell
Sampling Point
When a PDCP SDU are received by PDCP layer from RLC layer on the
uplink.
Explanation
The counter provides the other part volume of PDCP SDU transmitted by
eNodeB to UE on the uplink. The total volume = volume High + Volume
Low.
Updated
When a PDCP SDU are received by PDCP layer from RLC layer on the
uplink,the counter is incremented by the bit-size of the PDCP SDU.
10-119
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the cell part bit-size of PDCP SDUs on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Mbit
Measurement Object
Cell
Sampling Point
When all packets of a PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
Updated
When all packets of a PDCP SDU are sent by the eNodeB over air
interface on the downlink, the counter is incremented by the bit-size of
the PDCP SDU.
The counter is used to count the cell part bit-size of PDCP SDUs on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Kbit
Measurement Object
Cell
Sampling Point
When all packets of a PDCP SDU are sent by the eNodeB over air
interface on the downlink.
Explanation
The counter provides the other part volume of PDCP SDU transmitted by
eNodeB to UE on the downlink. The total volume = volume High + Volume
Low. When the eNodeB get the successful DL TB HARQ feedback and all
frag of PDCP SDU related to TB have been transmitted to the air interface
successfully,the counter is collected.
Updated
When all packets of a PDCP SDU are sent by the eNodeB over air
interface on the downlink,the counter is incremented by the bit-size of
the PDCP SDU.
10-120
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373364109
C373364110
C373364111
C373364112
C373364113
C373364114
C373364115
C373364116
C373364117
10
C373364119
DL IP Packet Delay
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI1 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI2 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
10-122
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI3 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI4 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
10-123
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI5 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI6 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI7 PDCP SDU over the air.
10-124
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI8 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI9 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
10-125
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the PDCP SDU, and than
records the end time at sending the first part of the PDCP SDU over the air.
Explanation
When a PDCP SDU arrives the eNodeB PDCP layer, it is the start point in
time.When the first piece of PDCP SDU was was sent to air interface,it is
the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the PDCP SDU over the air.
Counter
Counter Name
Number
1
C373364100
C373364101
C373364102
C373364103
C373364104
C373364105
C373364106
C373364107
C373364108
10
C373364118
The counter is used to count the average QCI1 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
10-126
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI1 PDCP SDU.
The counter is used to count the average QCI2 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI2 PDCP SDU.
The counter is used to count the average QCI3 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
10-127
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI3 PDCP SDU.
The counter is used to count the average QCI4 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI4 PDCP SDU.
The counter is used to count the average QCI5 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
10-128
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI5 PDCP SDU.
The counter is used to count the average QCI6 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI6 PDCP SDU.
The counter is used to count the average QCI7 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
10-129
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI7 PDCP SDU.
The counter is used to count the average QCI8 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI8 PDCP SDU.
The counter is used to count the average QCI9 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
10-130
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI9 PDCP SDU.
The counter is used to count the average PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
The eNodeB records the start time at receiving the PDCP SDU, and than
records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a PDCP SDU arrives the eNodeB PDCP layer,it is the start point in
time.When the last piece of PDCP SDU was received by the UE according
to received HARQ feedback information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the PDCP SDU.
Counter
Counter Name
Number
1
C373343796
C373343797
C373343798
C373343799
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the call duration of QCI1 E-RABs before
dropping.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After a data radio bearer with QCI = 1 is successfully setup, the eNodeB
start to detect the active session time of the bearer. When the bearer is
initiated to release by eNodeB, report the total session time of it. The
counter provides the number of atcivity session time.
Updated
The counter is used to count the call duration of QCI2 E-RABs before
dropping.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After a data radio bearer with QCI = 2 is successfully setup, the eNodeB
start to detect the active session time of the bearer. When the bearer
is initiated to release by eNodeB, report the total session time of it.The
counter provides the number of atcivity session time.
Updated
The counter is used to count the call duration of QCI3 E-RABs before
dropping.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
10-132
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
After a data radio bearer with QCI = 3 is successfully setup, the eNodeB
start to detect the active session time of the bearer. When the bearer is
initiated to release by eNodeB, report the total session time of it. The
counter provides the number of atcivity session time.
Updated
The counter is used to count the call duration of QCI4 E-RABs before
dropping.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After a data radio bearer with QCI = 4 is successfully setup, the eNodeB
start to detect the active session time of the bearer. When the bearer is
initiated to release by eNodeB, report the total session time of it. The
counter provides the number of atcivity session time.
Updated
Counter
Counter Name
Number
1
C373353900
C373353901
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
3
C373353902
C373353903
C373353904
C373353905
C373353906
C373353907
C373353908
10
C373353909
11
C373353910
12
C373353911
13
C373353912
14
C373353913
15
C373353914
16
C373353915
17
C373353916
18
C373353917
19
C373353956
20
C373353957
The counter is used to count the number of QCI1 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI1 PDCP SDU sequece number
discontinuity in UL.
10-134
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI1 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI2 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI2 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI2 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI3 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI3 PDCP SDU sequece number
discontinuity in UL.
10-135
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI3 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI4 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI4 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI4 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI5 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI5 PDCP SDU sequece number
discontinuity in UL.
10-136
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI5 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI6 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI6 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI6 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI7 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI7 PDCP SDU sequece number
discontinuity in UL.
10-137
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI7 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI8 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI8 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI8 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI9 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the QCI9 PDCP SDU sequece number
discontinuity in UL.
10-138
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI9 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI1 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI2 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
10-139
SJ-20121224143652-001|20130925(R1.6)
Explanation
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI3 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI4 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
10-140
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI5 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI6 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
10-141
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI7 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI8 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI9 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
10-142
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI9 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of PDCP SDU that are lost on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB detects the PDCP SDU sequece number discontinuity
in UL.
Explanation
When the eNodeB PDCP layer receives the PDCP PDU from the RLC
layer, compare the received PDU sequence number with the expected
sequence number. If the received is larger than the expected, it is
considered that there is packet loss in UL. The number of the lost SDU is
the difference between the received sequence number and the expected
sequence number.
Updated
The counter is used to count the number of packets that are lost at Uu
transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
10-143
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB discards the PDCP SDU in DL, for which at least a part
has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the PDCP SDU
in DL, for which at least a part has been transmitted over the air but not
positively acknowledged.
Counter
Counter Name
Number
1
C373353918
C373353919
C373353920
C373353921
C373353922
C373353923
C373353924
C373353925
C373353926
10
C373353958
The counter is used to count the number of QCI1 packets that are dropped
due to congestion, traffic management etc.
10-144
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI2 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI3 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which no part
has been transmitted over the air.
10-145
SJ-20121224143652-001|20130925(R1.6)
Explanation
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI4 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI5 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP
SDU in DL, for which no part has been transmitted over the air.
10-146
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI6 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI7 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI8 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
10-147
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI9 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB will discard the QCI9 PDCP SDU and no part of which has
been transmitted over the air when "timer discard" timer of detecting the
SDU expires or there is no DL buffer for the SDU. The counter is used
to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of packets that are dropped due
to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB discards the PDCP SDU in DL, for which no part has
been transmitted over the air.
Explanation
the eNodeB discards the PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the PDCP SDU
in DL, for which no part has been transmitted over the air.
10-148
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373353927
C373353928
C373353929
C373353930
C373353931
C373353932
C373353933
C373353934
C373353935
10
C373353936
11
C373353937
12
C373353938
13
C373353939
14
C373353940
15
C373353941
16
C373353942
17
C373353943
18
C373353944
19
C373353947
20
C373353948
21
C373353949
22
C373353950
23
C373353951
24
C373353952
25
C373353953
26
C373353954
10-149
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
27
C373353955
28
C373353959
29
C373353960
30
C373353961
The counter is used to count the number of QCI1 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI1 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI1 PDCP packet in the uplink.
The counter is used to count the number of QCI2 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI2 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI2 PDCP packet in the uplink.
10-150
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI3 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI3 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI3 PDCP packet in the uplink.
The counter is used to count the number of QCI4 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI4 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI4 PDCP packet in the uplink.
The counter is used to count the number of QCI5 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP packet in the uplink.
10-151
SJ-20121224143652-001|20130925(R1.6)
Explanation
After the PDCP layer receives the QCI5 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI5 PDCP packet in the uplink.
The counter is used to count the number of QCI6 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI6 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI6 PDCP packet in the uplink.
The counter is used to count the number of QCI7 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI7 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI7 PDCP packet in the uplink.
The counter is used to count the number of QCI8 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
10-152
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI8 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI8 PDCP packet in the uplink.
The counter is used to count the number of QCI9 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI9 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI9 PDCP packet in the uplink.
The counter is used to count the number of QCI1 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI1 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI1 PDCP SDU from the SGW or the other eNodeB.
10-153
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI2 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI2 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI2 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI3 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI3 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI3 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI4 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI4 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
10-154
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI4 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI5 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI5 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI5 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI6 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI6 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI6 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI7 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 PDCP SDU.
10-155
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI7 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI7 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI8 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI8 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI8 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI9 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI9 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI9 PDCP SDU from the SGW or the other eNodeB.
10.3.3.3.19 C373353947 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=1
Definition
The counter is used to count the number of QCI1 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
10-156
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI1 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI1 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.20 C373353948 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=2
Definition
The counter is used to count the number of QCI2 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI2 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI2 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.21 C373353949 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=3
Definition
The counter is used to count the number of QCI3 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI3 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
10-157
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI3 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.22 C373353950 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=4
Definition
The counter is used to count the number of QCI4 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI4 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI4 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.23 C373353951 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=5
Definition
The counter is used to count the number of QCI5 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI5 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI5 PDCP SDU,for which all parts have been
transmitted over the air.
10-158
SJ-20121224143652-001|20130925(R1.6)
10.3.3.3.24 C373353952 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=6
Definition
The counter is used to count the number of QCI6 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI6 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI6 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.25 C373353953 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=7
Definition
The counter is used to count the number of QCI7 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI7 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI7 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.26 C373353954 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=8
Definition
The counter is used to count the number of QCI8 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
10-159
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI8 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI8 PDCP SDU,for which all parts have been
transmitted over the air.
10.3.3.3.27 C373353955 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=9
Definition
The counter is used to count the number of QCI9 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI9 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI9 PDCP SDU,for which all parts have been
transmitted over the air.
The counter is used to count the number of packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP packet in the uplink.
Explanation
After the PDCP layer receives the PDCP PDU from RLC layer,the PDU is
disposed successfully and than becomes PDCP SDU. The counter is used
to count the number of the SDU.
10-160
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
PDCP packet in the uplink.
The counter is used to count the number of packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB PDCP layer receives the PDCP SDU from the SGW or
the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of PDCP SDUs that the last piece
was received by the UE according to received HARQ feedback information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about PDCP SDU,for which all parts have been
transmitted over the air.
10-161
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373384300
C373384301
C373384302
C373384303
C373384304
C373384305
C373384306
C373384307
C373384308
10
C373384309
11
C373384310
12
C373384311
13
C373384312
14
C373384313
15
C373384314
16
C373384315
17
C373384316
18
C373384317
19
C373384318
20
C373384319
21
C373384320
22
C373384321
23
C373384322
24
C373384323
10-162
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
25
C373384324
26
C373384325
27
C373384326
28
C373384327
29
C373384328
30
C373384329
31
C373384330
32
C373384331
33
C373384332
34
C373384333
35
C373384334
36
C373384335
37
C373384348
38
C373384349
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 1,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 1
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
10-163
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 2,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 2
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 3,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 3
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 4,and that have DTCH data queued on
the uplink.
10-164
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 4
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 5,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 5
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 6,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
10-165
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 6
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 7,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 7
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 8,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI8 DRB at sampling time.
10-166
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 8
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 9,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 9
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 1,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 1
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
10-167
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 2,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 2
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 3,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 3
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
10-168
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 4,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 4
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 5,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 5
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 6,and that have DTCH data queued on
the downlink.
10-169
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 6
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 7,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 7
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 8,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
10-170
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 8
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 9,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 9
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 1,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI1 DRB at sampling time.
10-171
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 1 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 2,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 2 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 3,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 3 at sampling time.The counter provides the maximum value in the
measurement period.
10-172
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI3
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 4,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 4 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 5,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 5 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
actives UEs is larger than the prior at sampling point.
10-173
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 6,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 6 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 7,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 7 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 8,and that have DTCH data
queued on the uplink.
10-174
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 8 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 9,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 9 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 1,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
10-175
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 1 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 2,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 2 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 3,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI3 DRB at sampling time.
10-176
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 3 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 4,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 4 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 5,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 5 at sampling time.The counter provides the maximum value in the
measurement period.
10-177
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI5
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 6,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 6 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 7,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 7 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
actives UEs is larger than the prior at sampling point.
10-178
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 8,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 8 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 9,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 9 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs that have
DTCH data queued on the downlink or uplink.
Sampling Interval
100 ms
10-179
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in buffer at
sampling time.
Explanation
Number of UEs for which there is buffered data in MAC, RLC or PDCP
protocol layers for Data Radio Bearer of traffic class at sampling time. The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current actives
UEs is larger than the prior at sampling point.
The counter is used to count the average number of UEs that have DTCH
data queued on the downlink or the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs which has data in buffer at
sampling time.
Explanation
Updated
The counter is updated by accumulating all the sample active UEs, and
then dividing the sum by the measurement period.
Counter
Counter Name
Number
1
C373384336
10-180
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
2
C373384337
C373384338
C373970000
C373970001
The counter is used to count maximum number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user is active
when having traffic and DRX high level.Otherwise the user is inactive.The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current active
state UEs is larger than the prior at sampling point.
The counter is used to count minimum number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Minimum
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
10-181
SJ-20121224143652-001|20130925(R1.6)
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user is active
when having traffic and DRX high level.Otherwise the user is inactive.The
counter provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current active
state UEs is smaller than the prior at sampling point.
The counter is used to count average number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user
is active when having traffic and DRX high level.Otherwise the user is
inactive.The counter provides the average value of all sampling point in the
measurement period.
Updated
The counter is updated by accumulating all the sample active state UEs,
and then dividing the sum by the measurement period.
The counter is used to count the maximum number of UEs which state
is "active" on board level.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
TBoard
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user is active
when having traffic and DRX high level.Otherwise the user is inactive.The
counter provides the maximum value in the measurement period.
Updated
10-182
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs which state is
"active" on board level.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
TBoard
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user
is active when having traffic and DRX high level.Otherwise the user is
inactive.The counter provides the average value of all sampling point in the
measurement period.
Updated
Counter
Counter Name
Number
1
C373384343
C373384344
C373384345
C373384346
C373384347
Sampling Interval
10 s
10-183
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs with category = 1 at sampling time.
Explanation
Updated
The counter is updated by accumulating all the sample UEs with category
= 1, and then dividing the sum by the measurement period.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs with category = 2 at sampling time.
Explanation
Updated
The counter is updated by accumulating all the sample UEs with category
= 2, and then dividing the sum by the measurement period.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs with category = 3 at sampling time.
10-184
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is updated by accumulating all the sample UEs with category
= 3, and then dividing the sum by the measurement period.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs with category = 4 at sampling time.
Explanation
Updated
The counter is updated by accumulating all the sample UEs with category
= 4, and then dividing the sum by the measurement period.
Sampling Interval
10 s
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collects the number of UEs with category = 5 at sampling time.
Explanation
10-185
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is updated by accumulating all the sample UEs with category
= 5, and then dividing the sum by the measurement period.
Counter
Counter Name
Number
1
C373454816
C373454817
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
10-186
SJ-20121224143652-001|20130925(R1.6)
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Counter
Counter Name
Number
1
C374574200
C374574201
C374574202
C374574203
C374574204
C374574205
C374574206
C374574207
C374574208
10
C374574209
11
C374574210
12
C374574211
13
C374574212
14
C374574213
15
C374574214
16
C374574215
17
C374574216
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C374574217
19
C374574218
20
C374574219
21
C374574220
22
C374574221
23
C374574222
24
C374574223
25
C374574224
26
C374574225
27
C374574226
28
C374574227
29
C374574228
30
C374574229
31
C374574230
32
C374574231
33
C374574232
34
C374574233
35
C374574234
36
C374574235
37
C374574236
38
C374574237
39
C374574238
40
C374574239
41
C374574240
42
C374574241
43
C374574242
44
C374574243
10-188
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average cell bit-rate of control plane
PDCP SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME.
Explanation
Updated
The counter is used to count the maximum cell bit-rate of control plane
PDCP SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB sends the PDCP SDU of signal radio bear to the MME.
Explanation
Updated
The counter is replaced with the current value when the current UL PDCP
SDU volume is larger than the prior at sampling point.
The counter is used to count the average cell bit-rate of control plane
PDCP SDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
10-189
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the PDCP SDU of signal radio bear from the
MME.
Explanation
Updated
The counter is used to count the maximum cell bit-rate of control plane
PDCP SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the PDCP SDU of signal radio bear from the
MME.
Explanation
Updated
The counter is replaced with the current value when the current DL SRB
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the average cell bit-rate of QCI1 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW.
10-190
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI2 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI3 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
10-191
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the average cell bit-rate of QCI4 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI5 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI6 PDCP
SDUs on the uplink.
10-192
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI7 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI8 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW.
10-193
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI9 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that is
sent by PDCP layer in UL from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
average value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of QCI1 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
10-194
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the average cell bit-rate of QCI2 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI3 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
10-195
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average cell bit-rate of QCI4 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI5 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
10-196
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average cell bit-rate of QCI6 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI7 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
10-197
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average cell bit-rate of QCI8 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is used to count the average cell bit-rate of QCI9 PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted. The counter
provides the average value of all sampling point in the measurement
period.
Updated
10-198
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell bit-rate of QCI1 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted.The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI2 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI3 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
10-199
SJ-20121224143652-001|20130925(R1.6)
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI4 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI5 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP SDU to the SGW.
10-200
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI6 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI7 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
10-201
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI8 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI9 PDCP
SDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is sent by PDCP layer from the previous sampling time to the current
sampling time. PDCP SDUs that are forwarded over the X2/S1 to another
eNodeB during handover have been deducted. The counter provides the
maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI1 PDCP
SDUs on the downlink.
10-202
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI1 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI1 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI2 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI2 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI2 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI3 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
10-203
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB receives the QCI3 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI3 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI4 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI4 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI4 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI5 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI5 PDCP SDU from the SGW or the
other eNodeB.
10-204
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time,the eNodeB collects the QCI5 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI6 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI6 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI6 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI7 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI7 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI7 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
10-205
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI8 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI8 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI8 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of QCI9 PDCP
SDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the QCI9 PDCP SDU from the SGW or the
other eNodeB.
Explanation
At sampling time,the eNodeB collects the QCI9 PDCP SDU volume that
is received by PDCP layer in DL from the previous sampling time to the
current sampling time. PDCP SDUs that are forwarded over the X2/S1
to another eNodeB during handover have been deducted.The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP SDU volume is larger than the prior at sampling point.
10-206
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum cell bit-rate of PDCP SDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the PDCP SDU volume that is sent
by PDCP layer from the previous sampling time to the current sampling
time. PDCP SDUs that are forwarded over the X2/S1 to another eNodeB
during handover have been deducted. The counter provides the maximum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
SDU volume is larger than the prior at sampling point.
The counter is used to count the maximum cell bit-rate of PDCP SDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the PDCP SDU from the SGW or the other
eNodeB.
Explanation
Updated
The counter is replaced with the current value when the current DL PDCP
SDU volume is larger than the prior at sampling point.
The counter is used to count the average cell bit-rate of PDCP SDUs on
the uplink.
Sampling Interval
1s
Counter Type
Average
10-207
SJ-20121224143652-001|20130925(R1.6)
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP SDU to the SGW.
Explanation
At sampling time,the eNodeB collects the PDCP SDU volume that is sent
by PDCP layer from the previous sampling time to the current sampling
time. PDCP SDUs that are forwarded over the X2/S1 to another eNodeB
during handover have been deducted. The counter provides the average
value of all sampling point in the measurement period.
Updated
The counter is used to count the average cell bit-rate of PDCP SDUs on
the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB receives the PDCP SDU from the SGW or the other
eNodeB.
Explanation
Updated
10-208
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C374543600
C374543601
C374543602
C374543603
C374543604
C374543605
C374543606
C374543607
C374543608
10
C374543609
11
C374543610
12
C374543611
13
C374543612
14
C374543613
15
C374543614
10-209
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
16
C374543615
17
C374543616
18
C374543617
19
C374543618
20
C374543619
21
C374543620
22
C374543621
23
C374543622
24
C374543623
25
C374543624
26
C374543625
27
C374543626
28
C374543627
29
C374543628
30
C374543629
31
C374543630
32
C374543631
33
C374543632
34
C374543633
35
C374543634
36
C374543635
37
C374543636
38
C374543637
39
C374543638
40
C374543639
41
C374543640
42
C374543641
43
C374543642
44
C374543643
45
C374543644
46
C374543645
47
C374543646
10-210
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
48
C374543647
49
C374543648
50
C374543649
51
C374543650
52
C374543651
53
C374543652
54
C374543653
55
C374543654
56
C374543655
57
C374543656
58
C374543657
59
C374543658
60
C374543659
The counter is used to count the maximum cell throughput of PDCP PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL PDCP
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of PDCP PDUs
on the downlink.
10-211
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL PDCP
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of PDCP PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDU to the eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is sent by PDCP layer to RLC layer from the
previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
10-212
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that
includes the DRB's and SRB's and is received by PDCP layer from RLC
layer from the previous sampling time to the current sampling time. The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that
includes the DRB's and SRB's and is received by PDCP layer from RLC
layer from the previous sampling time to the current sampling time. The
counter provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL PDCP
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of PDCP PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the PDU from the eNodeB RLC
layer.
Explanation
At sampling time, the eNodeB collects the PDCP PDU volume that includes
the DRB's and SRB's and is received by PDCP layer from RLC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
10-213
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI1 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 PDCP
PDUs on the downlink.
10-214
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI1 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
10-215
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
10-216
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI2 PDCP
PDUs on the uplink.
10-217
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
10-218
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI2 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
10-219
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI3
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI3 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 PDCP
PDUs on the uplink.
10-220
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI4 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
10-221
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
10-222
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI4 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 PDCP
PDUs on the uplink.
10-223
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI5 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
10-224
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
10-225
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI6 PDCP
PDUs on the downlink.
10-226
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
10-227
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer sends the QCI6 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
10-228
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI6
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI7 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 PDCP
PDUs on the downlink.
10-229
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI7 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
10-230
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
10-231
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of QCI8 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 PDCP
PDUs on the downlink.
10-232
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI8 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
10-233
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the maximum value in the
measurement period.
10-234
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
sent by PDCP layer to RLC layer from the previous sampling time to the
current sampling time. The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 PDCP
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 DRB PDU to the eNodeB
RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that
is sent by PDCP layer to RLC layer from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI9 PDCP
PDUs on the uplink.
10-235
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that
is received by PDCP layer from RLC layer from the previous sampling
time to the current sampling time. The counter provides the minimum
value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
PDCP PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 PDCP
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
10-236
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB PDCP layer receives the QCI9 DRB PDU from the
eNodeB RLC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 PDCP PDU volume that is
received by PDCP layer from RLC layer from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
Counter
Counter Name
Number
1
C374543660
C374543661
C374543662
C374543663
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
5
C374543664
C374543665
C374543666
C374543667
C374543668
10
C374543669
11
C374543670
12
C374543671
13
C374543672
14
C374543673
15
C374543674
16
C374543675
17
C374543676
18
C374543677
19
C374543678
20
C374543679
21
C374543680
22
C374543681
23
C374543682
24
C374543683
25
C374543684
26
C374543685
27
C374543686
28
C374543687
29
C374543688
30
C374543689
31
C374543690
32
C374543691
33
C374543692
34
C374543693
35
C374543694
36
C374543695
10-238
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
37
C374543696
38
C374543697
39
C374543698
40
C374543699
41
C374543700
42
C374543701
43
C374543702
44
C374543703
45
C374543704
46
C374543705
47
C374543706
48
C374543707
49
C374543708
50
C374543709
51
C374543710
52
C374543711
53
C374543712
54
C374543713
55
C374543714
56
C374543715
57
C374543716
58
C374543717
59
C374543718
60
C374543719
The counter is used to count the maximum cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
10-239
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL RLC
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU.The counter provides the minimum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL RLC
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of RLC PDUs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the PDU to the eNodeB MAC layer.
10-240
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is sent by RLC layer to MAC layer from the
previous sampling time to the current sampling time.The volume includes
retransmission's PDU. The counter provides the average value of all
sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from the
previous sampling time to the current sampling time. The volume includes
retransmission's PDU. The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL RLC
PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from the
previous sampling time to the current sampling time. The volume includes
retransmission's PDU. The counter provides the minimum value in the
measurement period.
10-241
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL RLC
PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of RLC PDUs
on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the PDU from the eNodeB MAC
layer.
Explanation
At sampling time, the eNodeB collects the RLC PDU volume that includes
the DRB's, SRB's and is received by RLC layer from MAC layer from
the previous sampling time to the current sampling time. The volume
includes retransmission's PDU. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is used to count the maximum cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that is
sent by RLC layer to MAC layer from the previous sampling time to the
current sampling time.The volume includes retransmission's PDU. The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
RLC PDU volume is larger than the prior at sampling point.
10-242
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI1 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI1 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
10-243
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI1 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI1 DRB PDU from the
eNodeB MAC layer.
10-244
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI1 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI1 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-245
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI2
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI2 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI2 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
RLC PDU volume is larger than the prior at sampling point.
10-246
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI2 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI2 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI2 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI2 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
10-247
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI3 DRB PDU to the eNodeB
MAC layer.
10-248
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI3 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-249
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI3
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI3 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI3 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI3 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI3 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
RLC PDU volume is larger than the prior at sampling point.
10-250
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI4 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI4 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
10-251
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI4
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI4 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI4 DRB PDU from the
eNodeB MAC layer.
10-252
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI4 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI4 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-253
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI5
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI5 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI5 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
RLC PDU volume is larger than the prior at sampling point.
10-254
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI5 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI5 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI5 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI5 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
10-255
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI6
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI6 DRB PDU to the eNodeB
MAC layer.
10-256
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI6 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-257
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI6
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI6 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI6 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI6 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI6 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
RLC PDU volume is larger than the prior at sampling point.
10-258
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI7 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI7 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
10-259
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI7 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI7 DRB PDU from the
eNodeB MAC layer.
10-260
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI7 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI7 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-261
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI8
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI8 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample DL QCI8 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
RLC PDU volume is larger than the prior at sampling point.
10-262
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the minimum cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI8 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI8 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI8 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI8 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Maximum
10-263
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 RLC
PDUs on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer sends the QCI9 DRB PDU to the eNodeB
MAC layer.
10-264
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is sent by RLC layer to MAC layer from
the previous sampling time to the current sampling time.The volume
includes retransmission's PDU. The counter provides the average value of
all sampling point in the measurement period.
Updated
The counter is updated by accumulating all the sample DL QCI9 RLC PDU
volume, and then dividing the sum by the measurement period.
The counter is used to count the maximum cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
RLC PDU volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the minimum value in the measurement period.
10-265
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI9
RLC PDU volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of QCI9 RLC
PDUs on the uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB RLC layer receives the QCI9 DRB PDU from the
eNodeB MAC layer.
Explanation
At sampling time, the eNodeB collects the QCI9 RLC PDU volume that
includes the retransmission's and is received by RLC layer from MAC layer
from the previous sampling time to the current sampling time. The counter
provides the average value of all sampling point in the measurement
period.
Updated
The counter is updated by accumulating all the sample UL QCI9 RLC PDU
volume, and then dividing the sum by the measurement period.
10-266
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C374543720
C374543721
C374543722
C374543723
C374543724
C374543725
The counter is used to count the maximum cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
10-267
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current DL MAC
TB volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
average value in the measurement period.
Updated
The counter is replaced with the current value when the current DL MAC
TB volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of MAC TBs
on the downlink.
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB MAC layer sends the transport block to the eNodeB
PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is sent by MAC layer to PHY layer from the previous
sampling time to the current sampling time. The counter provides the
maximum value in the measurement period.
10-268
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the maximum cell throughput of MAC TBs
on the uplink.
Sampling Interval
1s
Counter Type
Maximum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current UL MAC
TB volume is larger than the prior at sampling point.
The counter is used to count the minimum cell throughput of MAC TBs
on the uplink.
Sampling Interval
1s
Counter Type
Minimum
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the average value in the measurement period.
Updated
The counter is replaced with the current value when the current UL MAC
TB volume is smaller than the prior at sampling point.
The counter is used to count the average cell throughput of MAC TBs
on the uplink.
10-269
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Mbps
Measurement Object
Logic Cell
Sampling Point
When the eNodeB MAC layer receives the transport block from the
eNodeB PHY layer.
Explanation
At sampling time, the eNodeB collects the MAC TB volume that includes
retransmission's and is received by MAC layer from PHY layer from the
previous sampling time to the current sampling time. The counter provides
the maximum value in the measurement period.
Updated
Counter
Counter Name
Number
1
C374564109
C374564110
C374564111
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
4
C374564112
C374564113
C374564114
C374564115
C374564116
C374564117
10
C374564119
DL IP Packet Delay
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI1 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
10-271
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI2 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI3 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
10-272
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI4 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI5 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI6 PDCP SDU over the air.
10-273
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI7 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI8 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
10-274
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU,
and than records the end time at sending the first part of the PDCP SDU
over the air.
Explanation
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer, it is the start
point in time.When the first piece of PDCP SDU was was sent to air
interface,it is the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the QCI9 PDCP SDU over the air.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the PDCP SDU, and than
records the end time at sending the first part of the PDCP SDU over the air.
Explanation
When a PDCP SDU arrives the eNodeB PDCP layer, it is the start point in
time.When the first piece of PDCP SDU was was sent to air interface,it is
the end point in time.
IP Latency in DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB sends the
first part of the PDCP SDU over the air.
Counter
Counter Name
Number
1
C374564100
C374564101
C374564102
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
4
C374564103
C374564104
C374564105
C374564106
C374564107
C374564108
10
C374564118
The counter is used to count the average QCI1 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI1 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI1 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI1 PDCP SDU.
The counter is used to count the average QCI2 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
10-276
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI2 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI2 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI2 PDCP SDU.
The counter is used to count the average QCI3 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI3 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI3 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI3 PDCP SDU.
The counter is used to count the average QCI4 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
10-277
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB records the start time at receiving the QCI4 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI4 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI4 PDCP SDU.
The counter is used to count the average QCI5 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI5 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI5 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI5 PDCP SDU.
The counter is used to count the average QCI6 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI6 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
10-278
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI6 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI6 PDCP SDU.
The counter is used to count the average QCI7 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI7 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI7 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI7 PDCP SDU.
The counter is used to count the average QCI8 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI8 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
10-279
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a QCI8 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI8 PDCP SDU.
The counter is used to count the average QCI9 PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the QCI9 PDCP SDU, and
than records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
Explanation
When a QCI9 PDCP SDU arrives the eNodeB PDCP layer,it is the start
point in time.When the last piece of PDCP SDU was received by the
UE according to received HARQ feedback information,it is the end point
in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the QCI9 PDCP SDU.
The counter is used to count the average PDCP SDU delay on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
ms
Measurement Object
Logic Cell
Sampling Point
The eNodeB records the start time at receiving the PDCP SDU, and than
records the end time at getting the all positive HARQ acknowledgment
for the PDCP SDU.
10-280
SJ-20121224143652-001|20130925(R1.6)
Explanation
When a PDCP SDU arrives the eNodeB PDCP layer,it is the start point in
time.When the last piece of PDCP SDU was received by the UE according
to received HARQ feedback information,it is the end point in time.
Packet Delay in the DL is equal to the inteval from the start to the end.
Updated
The counter is increased by the sample value when the eNodeB gets the
all positive HARQ acknowledgment for the PDCP SDU.
Counter
Counter Name
Number
1
C374553900
C374553901
C374553902
C374553903
C374553904
C374553905
C374553906
C374553907
C374553908
10
C374553909
11
C374553910
12
C374553911
13
C374553912
14
C374553913
15
C374553914
16
C374553915
17
C374553916
10-281
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C374553917
19
C374553956
20
C374553957
The counter is used to count the number of QCI1 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI1 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI1 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI2 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI2 PDCP SDU sequece number
discontinuity in UL.
10-282
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI2 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI3 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI3 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI3 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI4 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI4 PDCP SDU sequece number
discontinuity in UL.
10-283
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI4 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI5 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI5 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI5 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI6 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI6 PDCP SDU sequece number
discontinuity in UL.
10-284
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI6 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI7 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI7 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI7 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI8 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI8 PDCP SDU sequece number
discontinuity in UL.
10-285
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB PDCP layer receives the QCI8 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI9 packets that are lost
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB detects the QCI9 PDCP SDU sequece number
discontinuity in UL.
Explanation
When the eNodeB PDCP layer receives the QCI9 PDCP PDU from
the RLC layer, compare the received PDU sequence number with the
expected sequence number. If the received is larger than the expected,
it is considered that there is packet loss in UL. The number of the lost
SDU is the difference between the received sequence number and the
expected sequence number.
Updated
The counter is used to count the number of QCI1 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
10-286
SJ-20121224143652-001|20130925(R1.6)
Explanation
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI2 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI3 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
10-287
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI4 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI5 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
10-288
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI6 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI7 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI8 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
10-289
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of QCI9 packets that are lost at
Uu transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which at least
a part has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the QCI9 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP
SDU in DL, for which at least a part has been transmitted over the air
but not positively acknowledged.
The counter is used to count the number of PDCP SDU that are lost on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
10-290
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB detects the PDCP SDU sequece number discontinuity
in UL.
Explanation
When the eNodeB PDCP layer receives the PDCP PDU from the RLC
layer, compare the received PDU sequence number with the expected
sequence number. If the received is larger than the expected, it is
considered that there is packet loss in UL. The number of the lost SDU is
the difference between the received sequence number and the expected
sequence number.
Updated
The counter is used to count the number of packets that are lost at Uu
transmission on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the PDCP SDU in DL, for which at least a part
has been transmitted over the air but not positively acknowledged.
Explanation
the eNodeB discards the PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If at least a part of it has
been transmitted over the air but not positively acknowledged, the counter
is counted.
Updated
The counter is increased by 1 when the eNodeB discards the PDCP SDU
in DL, for which at least a part has been transmitted over the air but not
positively acknowledged.
Counter
Counter Name
Number
1
C374553918
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
2
C374553919
C374553920
C374553921
C374553922
C374553923
C374553924
C374553925
C374553926
10
C374553958
The counter is used to count the number of QCI1 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI1 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI1 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI1 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI2 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
10-292
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB discards the QCI2 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI2 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI2 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI3 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI3 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI3 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI3 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI4 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI4 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI4 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI4 PDCP
SDU in DL, for which no part has been transmitted over the air.
10-293
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI5 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI5 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI5 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI5 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI6 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI6 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI6 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI6 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI7 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
10-294
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB discards the QCI7 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI7 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI7 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI8 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI8 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB discards the QCI8 PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the QCI8 PDCP
SDU in DL, for which no part has been transmitted over the air.
The counter is used to count the number of QCI9 packets that are dropped
due to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the QCI9 PDCP SDU in DL, for which no part
has been transmitted over the air.
Explanation
the eNodeB will discard the QCI9 PDCP SDU and no part of which has
been transmitted over the air when "timer discard" timer of detecting the
SDU expires or there is no DL buffer for the SDU. The counter is used
to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB discards the QCI9 PDCP
SDU in DL, for which no part has been transmitted over the air.
10-295
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of packets that are dropped due
to congestion, traffic management etc.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB discards the PDCP SDU in DL, for which no part has
been transmitted over the air.
Explanation
the eNodeB discards the PDCP SDU when timeout of "timer discard"
detecting the SDU or not DL buffer for the SDU. If no part of it has been
transmitted over the air, the counter is counted.
Updated
The counter is increased by 1 when the eNodeB discards the PDCP SDU
in DL, for which no part has been transmitted over the air.
Counter
Counter Name
Number
1
C374553927
C374553928
C374553929
C374553930
C374553931
C374553932
C374553933
C374553934
C374553935
10
C374553936
11
C374553937
12
C374553938
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
13
C374553939
14
C374553940
15
C374553941
16
C374553942
17
C374553943
18
C374553944
19
C374553947
20
C374553948
21
C374553949
22
C374553950
23
C374553951
24
C374553952
25
C374553953
26
C374553954
27
C374553955
28
C374553959
29
C374553960
30
C374553961
The counter is used to count the number of QCI1 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI1 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI1 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
10-297
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI1 PDCP packet in the uplink.
The counter is used to count the number of QCI2 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI2 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI2 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI2 PDCP packet in the uplink.
The counter is used to count the number of QCI3 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI3 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI3 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI3 PDCP packet in the uplink.
The counter is used to count the number of QCI4 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
10-298
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI4 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI4 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI4 PDCP packet in the uplink.
The counter is used to count the number of QCI5 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI5 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI5 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI5 PDCP packet in the uplink.
The counter is used to count the number of QCI6 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI6 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI6 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI6 PDCP packet in the uplink.
10-299
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI7 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI7 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI7 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI7 PDCP packet in the uplink.
The counter is used to count the number of QCI8 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI8 PDCP packet in the uplink.
Explanation
After the PDCP layer receives the QCI8 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI8 PDCP packet in the uplink.
The counter is used to count the number of QCI9 packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the QCI9 PDCP packet in the uplink.
10-300
SJ-20121224143652-001|20130925(R1.6)
Explanation
After the PDCP layer receives the QCI9 PDCP PDU from RLC layer,the
PDU is disposed successfully and than becomes PDCP SDU. The counter
is used to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
QCI9 PDCP packet in the uplink.
The counter is used to count the number of QCI1 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI1 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI1 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI1 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI2 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI2 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI2 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI2 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI3 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
10-301
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI3 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI3 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI3 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI4 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI4 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI4 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI4 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI5 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI5 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI5 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI5 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI6 packets that has entered
PDCP on the downlink.
10-302
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI6 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI6 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI6 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI7 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI7 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI7 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI7 PDCP SDU from the SGW or the other eNodeB.
The counter is used to count the number of QCI8 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI8 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI8 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI8 PDCP SDU from the SGW or the other eNodeB.
10-303
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of QCI9 packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer receives the QCI9 PDCP SDU.
Explanation
When the eNodeB PDCP layer receives the QCI9 PDCP SDU from the
SGW or the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
QCI9 PDCP SDU from the SGW or the other eNodeB.
10.8.3.3.19 C374553947 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=1
Definition
The counter is used to count the number of QCI1 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI1 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI1 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.20 C374553948 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=2
Definition
The counter is used to count the number of QCI2 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
10-304
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI2 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI2 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.21 C374553949 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=3
Definition
The counter is used to count the number of QCI3 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI3 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI3 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.22 C374553950 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=4
Definition
The counter is used to count the number of QCI4 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI4 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
10-305
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI4 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.23 C374553951 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=5
Definition
The counter is used to count the number of QCI5 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI5 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI5 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.24 C374553952 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=6
Definition
The counter is used to count the number of QCI6 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI6 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI6 PDCP SDU,for which all parts have been
transmitted over the air.
10-306
SJ-20121224143652-001|20130925(R1.6)
10.8.3.3.25 C374553953 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=7
Definition
The counter is used to count the number of QCI7 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI7 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI7 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.26 C374553954 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=8
Definition
The counter is used to count the number of QCI8 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI8 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI8 PDCP SDU,for which all parts have been
transmitted over the air.
10.8.3.3.27 C374553955 DL PDCP SDU Number Which HARQ Successfully Responds , QCI=9
Definition
The counter is used to count the number of QCI9 PDCP SDUs that the
last piece was received by the UE according to received HARQ feedback
information.
Sampling Interval
15 min
Counter Type
Accumulative
10-307
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about QCI9 PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about QCI9 PDCP SDU,for which all parts have been
transmitted over the air.
The counter is used to count the number of packets that has entered
PDCP on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB PDCP layer sends the PDCP packet in the uplink.
Explanation
After the PDCP layer receives the PDCP PDU from RLC layer,the PDU is
disposed successfully and than becomes PDCP SDU. The counter is used
to count the number of the SDU.
Updated
The counter is increased by 1 when the eNodeB PDCP layer sends the
PDCP packet in the uplink.
The counter is used to count the number of packets that has entered
PDCP on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
Explanation
When the eNodeB PDCP layer receives the PDCP SDU from the SGW or
the other eNodeB.the counter is used to count.
Updated
The counter is increased by 1 when the eNodeB PDCP layer receives the
PDCP SDU from the SGW or the other eNodeB.
10-308
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of PDCP SDUs that the last piece
was received by the UE according to received HARQ feedback information.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
When the eNodeB got the all positive acknowledgment about PDCP
SDU,for which all parts have been transmitted over the air.
Explanation
The counter provides the number of PDCP SDU when the last piece was
received by the UE according to received HARQ feedback information.
Updated
The counter is increased by 1 when the eNodeB got the all positive
acknowledgment about PDCP SDU,for which all parts have been
transmitted over the air.
Counter
Counter Name
Number
1
C374584300
C374584301
C374584302
C374584303
C374584304
C374584305
C374584306
C374584307
C374584308
10
C374584309
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
11
C374584310
12
C374584311
13
C374584312
14
C374584313
15
C374584314
16
C374584315
17
C374584316
18
C374584317
19
C374584318
20
C374584319
21
C374584320
22
C374584321
23
C374584322
24
C374584323
25
C374584324
26
C374584325
27
C374584326
28
C374584327
29
C374584328
30
C374584329
31
C374584330
32
C374584331
33
C374584332
34
C374584333
35
C374584334
36
C374584335
37
C374584348
38
C374584349
10-310
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 1,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 1
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 2,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 2
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
10-311
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 3,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 3
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 4,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 4
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 5,and that have DTCH data queued on
the uplink.
10-312
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 5
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 6,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 6
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 7,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
10-313
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 7
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 8,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 8
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 9,and that have DTCH data queued on
the uplink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI9 DRB at sampling time.
10-314
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 9
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 1,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 1
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 2,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 2
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
10-315
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 3,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 3
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 4,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 4
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
10-316
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 5,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 5
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 6,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 6
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 7,and that have DTCH data queued on
the downlink.
10-317
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 7
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 8,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 8
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the average number of UEs for a Data Radio
Bearer of traffic class with QCI = 9,and that have DTCH data queued on
the downlink.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
10-318
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC or
PDCP protocol layers for a Data Radio Bearer of traffic class with QCI = 9
at sampling time.The counter provides the average value of all sampling
point in the measurement period.
Updated
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 1,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 1 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI1
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 2,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI2 DRB at sampling time.
10-319
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 2 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI2
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 3,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 3 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI3
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 4,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI4 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 4 at sampling time.The counter provides the maximum value in the
measurement period.
10-320
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current UL QCI4
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 5,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 5 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI5
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 6,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 6 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI6
actives UEs is larger than the prior at sampling point.
10-321
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 7,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 7 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI7
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 8,and that have DTCH data
queued on the uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 8 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI8
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 9,and that have DTCH data
queued on the uplink.
10-322
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in UL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the UL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 9 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current UL QCI9
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 1,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI1 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 1 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI1
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 2,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
10-323
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI2 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 2 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI2
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 3,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI3 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 3 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI3
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 4,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI4 DRB at sampling time.
10-324
SJ-20121224143652-001|20130925(R1.6)
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 4 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI4
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 5,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI5 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 5 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI5
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 6,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI6 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 6 at sampling time.The counter provides the maximum value in the
measurement period.
10-325
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current value when the current DL QCI6
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 7,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI7 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 7 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI7
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 8,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI8 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 8 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI8
actives UEs is larger than the prior at sampling point.
10-326
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum number of UEs for a Data
Radio Bearer of traffic class with QCI = 9,and that have DTCH data queued
on the downlink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in DL buffer for
QCI9 DRB at sampling time.
Explanation
Number of UEs for which there is buffered data for the DL in MAC, RLC
or PDCP protocol layers for a Data Radio Bearer of traffic class with QCI
= 9 at sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced with the current value when the current DL QCI9
actives UEs is larger than the prior at sampling point.
The counter is used to count the maximum number of UEs that have
DTCH data queued on the downlink or uplink.
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in buffer at
sampling time.
Explanation
Number of UEs for which there is buffered data in MAC, RLC or PDCP
protocol layers for Data Radio Bearer of traffic class at sampling time. The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current actives
UEs is larger than the prior at sampling point.
The counter is used to count the average number of UEs that have DTCH
data queued on the downlink or the uplink.
Sampling Interval
100 ms
Counter Type
Average
10-327
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB collects the number of UEs which has data in buffer at
sampling time.
Explanation
Updated
The counter is updated by accumulating all the sample active UEs, and
then dividing the sum by the measurement period.
Counter
Counter Name
Number
1
C374584336
C374584337
C374584338
The counter is used to count maximum number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
10-328
SJ-20121224143652-001|20130925(R1.6)
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user is active
when having traffic and DRX high level.Otherwise the user is inactive.The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the current value when the current active
state UEs is larger than the prior at sampling point.
The counter is used to count minimum number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Minimum
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user is active
when having traffic and DRX high level.Otherwise the user is inactive.The
counter provides the minimum value in the measurement period.
Updated
The counter is replaced with the current value when the current active
state UEs is smaller than the prior at sampling point.
The counter is used to count average number of UEs that the state is
"active".
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state"
at sampling time.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user
is active when having traffic and DRX high level.Otherwise the user is
inactive.The counter provides the average value of all sampling point in the
measurement period.
10-329
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is updated by accumulating all the sample active state UEs,
and then dividing the sum by the measurement period.
10-330
SJ-20121224143652-001|20130925(R1.6)
Chapter 11
11-1
SJ-20121224143652-001|20130925(R1.6)
Sampling point 1: Record the actual power of PDSCH within Type A and Type B
symbols, and then choose the larger one as the sample value.
Counter
Counter Name
Number
1
C373414550
C373414551
C373414552
11-2
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the maximum transmit power on the downlink.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
mW
Measurement Object
Cell
Sampling Point
When the eNodeB collects the power of TypeA and TypeB At sampling
time, and then selects the larger between TypeA and TypeB.
Explanation
The eNodeB collects the DL power at per sampling time.The counter take
the maximum of DL power among sampling points.
Updated
The counter is replaced with the current value when the current DL power
is larger than the prior at sampling point.
The counter is used to count the minimum transmit power on the downlink.
Sampling Interval
1 ms
Counter Type
Minimum
Unit
mW
Measurement Object
Cell
Sampling Point
When the eNodeB collects the power of TypeA and TypeB At sampling
time, and then selects the larger between TypeA and TypeB.
Explanation
The eNodeB collects the DL power at per sampling time.The counter take
the minimum of DL power among sampling points.
Updated
The counter is replaced with the current value when the current DL power
is smaller than the prior at sampling point.
The counter is used to count the average transmit power on the downlink.
Sampling Interval
1 ms
Counter Type
Average
Unit
mW
Measurement Object
Cell
11-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB collects the power of TypeA and TypeB At sampling
time, and then select the larger between TypeA and TypeB.
Explanation
The eNodeB collects the DL power at per sampling time.The counter take
the average of DL power among sampling points.
Updated
The counter is updated by accumulating all the sample DL power, and then
dividing the sum by the measurement period.
Counter
Counter Name
Number
1
C373910000
Maximum RSSI
C373910001
Minimum RSSI
C373910002
Average RSSI
Sampling Interval
10 s
Counter Type
Maximum
Unit
dBm
Measurement Object
AntPort
Sampling Point
Explanation
The eNodeB RRU samples the received power once at each sampling
point. After the report period expires, it reports the maximum receiving
power value of the report period.
Updated
The counter is replaced with the current value when the current RSSI is
larger than the prior at sampling point.
11-4
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Minimum
Unit
dBm
Measurement Object
AntPort
Sampling Point
Explanation
The eNodeB RRU samples the receiving power once at each sampling
point. After the report period expires, it reports the minimum receiving
power value of the report period.
Updated
The counter is replaced with the current value when the current RSSI is
smaller than the prior at sampling point.
Sampling Interval
10 s
Counter Type
Average
Unit
dBm
Measurement Object
AntPort
Sampling Point
Explanation
The eNodeB RRU samples the receiving power once at each sampling
point. After the report period expires, it reports the average receiving
power value of the report period.
Updated
The counter is updated by accumulating all the sample RSSI, and then
dividing the sum by the measurement period.
11-5
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373414576
C373414577
C373414578
C373414579
C373414580
C373414581
C373414582
C373414583
C373414584
10
C373414585
11
C373414586
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-6
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-7
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
11-8
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
11-9
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Counter
Counter Name
Number
1
C373424600
C373424601
C373424602
C373424603
C373424604
C373424605
C373424606
C373424607
C373424608
10
C373424609
11
C373424610
12
C373424611
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
13
C373424621
14
C373424622
15
C373424623
16
C373424624
17
C373424625
18
C373424626
19
C373424627
20
C373424628
21
C373424629
22
C373424630
23
C373424631
24
C373424634
UL RACH RBs
25
C373424635
UL DCCH RBs
26
C373424636
UL DTCH RBs
27
C373424637
DL PCCH RBs
28
C373424638
DL BCCH RBs
29
C373424639
DL DCCH RBs
30
C373424640
DL DTCH RBs
31
C373424641
32
C373424642
33
C373444750
34
C373444751
35
C373444752
Sampling Interval
15 min
Counter Type
Accumulative
11-12
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for PUSCH on the
uplink.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collect the available PRB number for PUSCH at sampling
point.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for PDSCH on the
downlink.
11-13
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is increased by the PRB number used for PDSCH channel at
sampling point.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB collect the available PRB number for PDSCH at sampling
point.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB calculates the number of CCEs that each DCI uses in each
TTI.
Explanation
The counter counts the number of CCEs that the eNodeB allocates to the
PDCCH. It includes DCI0, DCI1, DCI1A, and DCI2. The number of used
CCEs = The number of allocated DCIs (including the uplink DCI0 and the
downlink DCI) * The number of CCE that one DCI occupies
Updated
The counter is updated by adding the previous value and the number of
measured CCEs in each TTI.
11-14
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB calculates the number of CCEs that each DCI uses in each
TTI.
Explanation
Updated
The counter is updated by adding the previous value and the number of
CCEs when the CFI is received from the UE.
The counter is used to count the peak usage (in percentage) of physical
resource blocks (PRBs) on the uplink for DTCH traffic.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current when the current PUSCH PRB
usage is larger than the prior at sampling point.
The counter is used to count the peak usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic.
11-15
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current when the current PDSCH PRB
usage is larger than the prior at sampling point.
The counter is used to count The counter is used to count the number of
physical resource blocks (PRBs) on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for uplink channel. The
channel includes PRACH,PUCCH and PUSCH.
Updated
The counter is increased by the PRB number used for uplink channel at
sampling point.
The counter is used to count the total number of physical resource blocks
(PRBs) on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
11-16
SJ-20121224143652-001|20130925(R1.6)
Explanation
It is PRB number that eNodeB allocates for uplink channel, is equal to the
PRB number for system banwidth.
Updated
The counter is increased by the PRB number allocated for uplink channel
at sampling point.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for downlink channel.
Updated
The counter is increased by the PRB number used for PDSCH channel at
sampling point.
The counter is used to count The counter is used to count the total number
of physical resource blocks (PRBs) on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When eNodeB downlink scheduler assign PRB for the PDSCH channel.
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=1.
11-17
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=2.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=3.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
11-18
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=4.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=5.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
11-19
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=6.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=7.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
11-20
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=8.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the mean usage (in percentage) of physical
resource blocks (PRBs) on the downlink for DTCH traffic with QCI=9.
Sampling Interval
1 ms
Counter Type
Average
Unit
Percent
Measurement Object
Cell
Sampling Point
11-21
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the peak usage (in percentage) of physical
resource blocks (PRBs) on the uplink.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current when the current UL PRB usage is
larger than the prior at sampling point.
The counter is used to count the peak usage (in percentage) of physical
resource blocks (PRBs) on the downlink.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Percent
Measurement Object
Cell
Sampling Point
Explanation
11-22
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced with the current when the current DL PRB usage is
larger than the prior at sampling point.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for RACH on the uplink.
Updated
When the eNodeB receives the Msg1 from the UE,the counter is increased
by the PRB number allocated for it.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for DCCH on the uplink.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
11-23
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for DTCH on the uplink.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for PCCH on the
downlink.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for BCCH on the
downlink.
Updated
11-24
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for DCCH on the
downlink.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for DTCH on the
downlink.
Updated
11.4.3.31 C373424641 PRB Number Used on PUSCH Channel within The Threshold
Definition
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
11-25
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When there are uplink PRB used for the PUSCH, and the threshold
requirements for RSRP and SINR must be satisfied. Users can set these
threshold values, and the default threshold requirements are: RSRP
> Threshold for RSRP Statistics and SINR > Threshold for DL SINR
Statistics.
Explanation
The counter displays the allocated RB number when eNB sends DCI0
or MSG 2 at the sample moment and the reserved RB number during
non-adaptive retransmission or SPS scheduling.
Updated
11.4.3.32 C373424642 PRB Number Used on PDSCH Channel within The Threshold
Definition
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When there are downlink PRB used for the PDSCH, and the threshold
requirements for RSRP and DL SINR must be satisfied.
Explanation
The counter statics the sum number of PRB used for PDSCH channel
within the threshold,but but exclude retransmission PRB number.The
counter displays the allocated PRB number when eNB sends DCI1/1A/2/2A
at the sample moment and the reserved PRB number during non-adaptive
retransmission or SPS scheduling.Users can set these threshold values,
and the default threshold requirements are: RSRP > Threshold for RSRP
Statistics and DL SINR > Threshold for DL SINR Statistics.The RSRP
threshold is converted by Power Headroom reporting that UE reports by
means of period or event trigger.The DL SINR threshold is converted by
CQI reported by UE.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
11-26
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
The MAC calculates the number of Preambles reported after the PHY
detection in each TTI.
Explanation
The eNodeB uplink scheduler detects the Preamble in each TTI and the
counter counts the number of successful detections.Group A Preamble is
the Preamble whose value is lower than sizeOfRA-PreamblesGroupA.
Updated
The counter is updated by adding the previous value and the number of
measured Preambles in each TTI.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The MAC calculates the number of Preambles reported after the PHY
detection in each TTI.
Explanation
The CMAC uplink scheduler detects the Preamble in each TTI and the
counter counts the number of successful detections.Group B Preamble is
the Preamble whose value is lower than numberOfRA-Preambles and
higher than or equal to sizeOfRA-PreamblesGroupA.
Updated
The counter is updated by adding the previous value and the number of
measured Preambles in each TTI.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
The MAC calculates the number of Preambles reported after the PHY
detection in each TTI.
11-27
SJ-20121224143652-001|20130925(R1.6)
Explanation
The eNodeB uplink scheduler detects the Preamble in each TTI and
the counter counts the number of successful detections.Dedicated
Preamble is the Preamble whose value is higher than or equal to
numberOfRA-Preambles.
Updated
The counter is updated by adding the previous value and the number of
measured Preambles in each TTI.
Counter
Counter Name
Number
1
C374624608
C374624609
C374624610
C374624611
The counter is used to count The counter is used to count the number of
physical resource blocks (PRBs) on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for uplink channel. The
channel includes PRACH,PUCCH and PUSCH.
Updated
The counter is increased by the PRB number used for uplink channel at
sampling point.
11-28
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the total number of physical resource blocks
(PRBs) on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is PRB number that eNodeB allocates for uplink channel, is equal to the
PRB number for system banwidth.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Logic Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for downlink channel.
Updated
The counter is increased by the PRB number used for PDSCH channel at
sampling point.
The counter is used to count The counter is used to count the total number
of physical resource blocks (PRBs) on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
11-29
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
Explanation
Updated
11.6 SPS
11.6.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373424676
C373424677
C373424678
C373424679
C373424680
C373424681
C373424682
C373424683
C373424684
10
C373424685
11
C373424686
12
C373424687
Sampling Interval
Event triggered
11-30
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
11-31
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
11-32
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
11-33
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-34
SJ-20121224143652-001|20130925(R1.6)
11.7 SINR
11.7.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373444754
C373444760
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB's PHY layer receives the UL data, measure the SINR
on every used PRB.
Explanation
The counter provides the mean SINR linear value of used PRB.
Updated
The counter is updated by accumulating all the sample SINR linear value
and then dividing the sum by the measurement period.
Sampling Interval
15 min
Counter Type
Average
Unit
dB
Measurement Object
Cell
Sampling Point
When the eNodeB's PHY layer receives the UL data, measure the SINR
on every used PRB.
11-35
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is updated by accumulating all the sample SINR and then
dividing the sum by the measurement period.
11.8 BLER
11.8.1 Flow Charts and Sampling Points
Figure 11-2 BLER
Counter
Counter Name
Number
1
C373454800
C373454801
C373454802
C373454803
C373454804
C373454805
C373454806
C373454807
C373454818
11-36
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
10
C373454819
11
C373454820
12
C373454821
The counter is used to count the number of error TBs transmitted on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB send a transport block to the UE, it will receive HARQ
feedback information from the UE. If the HARQ feedback is NACK or DTX,
it is added to the counter.
Updated
The counter is used to count the total number of TBs transmitted on the
downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB send a transport block to the UE, it will receive HARQ
feedback information from the UE. No matter the HARQ feedback is
ACK,NACK or DTX, it is added to the counter.
11-37
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of error TBs transmitted on the
uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB received a transport block from the UE, it will reply
HARQ feedback information to the UE. If the HARQ feedback is NACK
or DTX, it is added to the counter.
Updated
The counter is used to count the total number of TBs transmitted on the
uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB received a transport block from the UE, it will reply
HARQ feedback information to the UE. No matter the HARQ feedback is
ACK,NACK or DTX, it is added to the counter.
Updated
The counter is used to count the number of error TBs first transmitted
on the downlink.
Sampling Interval
15 min
11-38
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB first send a transport block to the UE, it will receive
HARQ feedback information about the TB from the UE. If the HARQ
feedback is NACK or DTX, it is added to the counter.
Updated
The counter is used to count the total number of TBs first transmitted on
the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB first send a transport block to the UE, it will receive
HARQ feedback information from the UE. No matter the HARQ feedback
is ACK,NACK or DTX, it is added to the counter.
Updated
The counter is used to count the number of error TBs first transmitted
on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
11-39
SJ-20121224143652-001|20130925(R1.6)
Explanation
After the eNodeB first received a transport block from the UE, it will reply
HARQ feedback information to the UE. If the HARQ feedback is NACK
or DTX, it is added to the counter.
Updated
The counter is incremented by 1 when eNB detectes a CRC error init TB.
The counter is used to count the total number of TBs first transmitted on
the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB first received a transport block from the UE, it will reply
HARQ feedback information to the UE. No matter the HARQ feedback is
ACK,NACK or DTX, it is added to the counter.
Updated
11.8.3.9 C373454818 Total Number of DL TBs that include RRC Release Msg
Definition
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-40
SJ-20121224143652-001|20130925(R1.6)
11.8.3.10 C373454819 Error Number of DL TBs that include RRC Release Msg
Definition
The counter is used to count the number of faulty TBs including the
RRCConnectionRelease message on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
11.8.3.11 C373454820 Total Number of DL TBs that include RRC Reconfig Msg in HO
Definition
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When eNodeB schedules a TB for DL data and the RRCConnectionReconfiguration message for handover is included in the TB.
Explanation
Updated
11-41
SJ-20121224143652-001|20130925(R1.6)
11.8.3.12 C373454821 Error Number of DL TBs that include RRC Reconfig Msg in HO
Definition
The counter is used to count the number of faulty TBs including the
RRCConnectionReconfiguration message for handover on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
Counter
Counter Name
Number
1
C373384339
C373384341
C373384350
C373384351
11-42
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the current active
state UEs is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the current active
state UEs is larger than the prior at sampling point.
The counter is used to count the total number of scheduled UEs in UL.
Sampling Interval
1 ms
Counter Type
Accumulative
11-43
SJ-20121224143652-001|20130925(R1.6)
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is updated by accumulating all the sample active state UEs.
The counter is used to count the total number of scheduled UEs in DL.
Sampling Interval
1 ms
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is updated by accumulating all the sample active state UEs.
System Bandwidth
NRBDL
67
NA
810
1126
2763
3
11-44
SJ-20121224143652-001|20130925(R1.6)
System Bandwidth
NRBDL
64110
Counter
Counter Name
Number
1
C373434700
C373434701
C373434702
C373434703
C373434704
C373434705
C373434706
C373434707
C373434708
10
C373434709
11
C373434710
12
C373434711
13
C373434712
14
C373434713
15
C373434714
16
C373434715
17
C373434716
18
C373434717
19
C373434718
20
C373434719
21
C373434720
22
C373434721
23
C373434722
24
C373434723
25
C373434724
26
C373434725
11-45
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
27
C373434726
28
C373434727
29
C373434728
30
C373434729
31
C373434730
32
C373434731
33
C373434732
34
C373434733
35
C373434734
36
C373434735
37
C373434736
38
C373434737
39
C373434738
40
C373434739
41
C373434740
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 0 from the UE feedback.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 1 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 2 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 3 from the UE feedback.
Explanation
Updated
11-47
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 4 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 5 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 6 from the UE feedback.
Explanation
Updated
11-48
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 7 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 8 from the UE feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 9 from the UE feedback.
Explanation
Updated
11-49
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 10 from the UE
feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 11 from the UE
feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 12 from the UE
feedback.
Explanation
11-50
SJ-20121224143652-001|20130925(R1.6)
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 13 from the UE
feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value equal to 14 from the UE
feedback.
Explanation
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
11-51
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the eNodeB receives the CQI value equal to 15 from the UE
feedback.
Explanation
Updated
The counter is used to count the average of the sub-band 0 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 0.
Explanation
Updated
The counter is used to count the average of the sub-band 1 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 1.
Explanation
Updated
11-52
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average of the sub-band 2 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 2.
Explanation
Updated
The counter is used to count the average of the sub-band 3 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 3.
Explanation
Updated
The counter is used to count the average of the sub-band 4 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
11-53
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 4.
Explanation
Updated
The counter is used to count the average of the sub-band 5 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 5.
Explanation
Updated
The counter is used to count the average of the sub-band 6 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 6.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average of the sub-band 7 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 7.
Explanation
Updated
The counter is used to count the average of the sub-band 8 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 8.
Explanation
Updated
The counter is used to count the average of the sub-band 9 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
11-55
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 9.
Explanation
Updated
The counter is used to count the average of the sub-band 10 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 10.
Explanation
Updated
The counter is used to count the average of the sub-band 11 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 11.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average of the sub-band 12 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 12.
Explanation
Updated
The counter is used to count the average of the sub-band 13 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 13.
Explanation
Updated
The counter is used to count the average of the sub-band 14 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
11-57
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 14.
Explanation
Updated
The counter is used to count the average of the sub-band 15 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 15.
Explanation
Updated
The counter is used to count the average of the sub-band 16 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 16.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average of the sub-band 17 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 17.
Explanation
Updated
The counter is used to count the average of the sub-band 18 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 18.
Explanation
Updated
The counter is used to count the average of the sub-band 19 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
11-59
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 19.
Explanation
Updated
The counter is used to count the average of the sub-band 20 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 20.
Explanation
Updated
The counter is used to count the average of the sub-band 21 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 21.
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the average of the sub-band 22 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 22.
Explanation
Updated
The counter is used to count the average of the sub-band 23 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 23.
Explanation
Updated
The counter is used to count the average of the sub-band 24 CQI reported
by UEs.
Sampling Interval
15 min
Counter Type
Average
Unit
N/A
11-61
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB receives the CQI value from the UE feedback in
sub-band 24.
Explanation
Updated
Counter
Counter Name
Number
1
C373515500
C373515501
C373515502
C373515503
C373515504
C373515505
The counter is used to count the number of transport blocks with QPSK
modulation on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
11-62
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of transport blocks with 16QAM
modulation on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of transport blocks with 64QAM
modulation on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of transport blocks with QPSK
modulation on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of transport blocks with 16QAM
modulation on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of transport blocks with 64QAM
modulation on the uplink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
11-64
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
Updated
Counter
Counter Name
Number
1
C373515506
C373515507
C373515508
C373515509
C373515510
C373515511
C373515512
C373515591
C373515592
10
C373515593
11
C373515594
12
C373515595
13
C373515596
14
C373515597
11-65
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of transport blocks with TM1
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM1 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM1 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM2
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM2 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM2 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM3
on the downlink.
Sampling Interval
15 min
11-66
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM3 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM3 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM4
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM4 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM4 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM5
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM5 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM5 MIMO
mode in PDSCH channel.
11-67
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of transport blocks with TM6
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM6 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM6 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM7
on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM7 MIMO mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM7 MIMO
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM3
RI=1 on the downlink.
11-68
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM3 RI=1 mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM3 RI=1
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM3
RI=2 on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM3 RI=2 mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM3 RI=2
mode in PDSCH channel.
Updated
11.12.3.10 C373515593 Number of DL TBs with TM4 RI=1 and Tx-Div Mode
Definition
The counter is used to count the number of transport blocks with TM4
RI=1 Tx-div on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM4 RI=1 Tx-DIV
mode in PDSCH channel.
11-69
SJ-20121224143652-001|20130925(R1.6)
Explanation
The counter provides the number of transport blocks based on TM4 RI=1
Tx-DIV mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM4
RI=1 SM on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the number of transport blocks based on TM4 RI=1
SM mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM4
RI=2 SM on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM4 RI=2 mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM4 RI=2
mode in PDSCH channel.
Updated
11-70
SJ-20121224143652-001|20130925(R1.6)
11.12.3.13 C373515596 Number of DL TBs with TM6 RI=1 and Tx-Div Mode
Definition
The counter is used to count the number of transport blocks with TM6
RI=1 Tx-div on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM6 RI=1 mode
in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM6 RI=1
mode in PDSCH channel.
Updated
The counter is used to count the number of transport blocks with TM6
RI=1 SM on the downlink.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB schedule a transport block based on TM6 RI=1 mode in
PDSCH channeWhen the eNodeB schedule a transport block based on
TM6 RI=1 SM mode in PDSCH channel.
Explanation
The counter provides the number of transport blocks based on TM6 RI=1
SM mode in PDSCH channel.
Updated
11-71
SJ-20121224143652-001|20130925(R1.6)
Aggregation level
UE-specific
12
16
16
16
Common
Counter
Counter Name
Number
1
C373424643
C373424644
C373424645
C373424646
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the number of CCE aggregation level 1 for PDCCH.
Updated
11-72
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the number of CCE aggregation level 2 for PDCCH.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter provides the number of CCE aggregation level 4 for PDCCH.
The counter is incremented by 1 when the eNodeB DL scheduler allocates
the CCE aggregation level 4 for PDCCH.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
The counter provides the number of CCE aggregation level 8 for PDCCH.
11-73
SJ-20121224143652-001|20130925(R1.6)
Updated
11.14 TA
11.14.1 Flow Charts and Sampling Points
Upon reception of a timing advance command, the UE shall adjust its uplink transmission
timing for PUCCH/PUSCH/SRS. The timing advance command indicates the change of
the uplink timing relative to the current uplink timing as multiples of 16Ts.
In case of random access response, 11-bit timing advance command [8], TA, indicates NTA
values by index values ofTA = 0, 1, 2,..., 1282, where an amount of the time alignment is
given by NTA = TA x 16.
Counter
Counter Name
Number
1
C373556400
C373556401
C373556402
C373556403
C373556404
C373556405
C373556406
C373556407
C373556408
10
C373556409
11
C373556410
12
C373556411
13
C373556412
14
C373556413
15
C373556414
Maximum of TA Value
11-74
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 0 and 1.
Explanation
The counter provides the number of TA value which ranges between 0 and
1 in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 2 and 3.
Explanation
The counter provides the number of TA value which ranges between 2 and
3 in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Updated
Sampling Interval
15 min
11-75
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 4 and 5.
Explanation
The counter provides the number of TA value which ranges between 4 and
5 in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 6 and 7.
Explanation
The counter provides the number of TA value which ranges between 6 and
7 in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 8 and 9.
Explanation
The counter provides the number of TA value which ranges between 8 and
9 in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
11-76
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the number of Timing Advance values (10 to
11) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 10 and 11.
Explanation
Updated
The counter is used to count the number of Timing Advance values (12 to
13) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 12 and 13.
Explanation
Updated
The counter is used to count the number of Timing Advance values (14 to
20) transmitted by the eNB to UEs.
11-77
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 14 and 20.
Explanation
Updated
The counter is used to count the number of Timing Advance values (21 to
27) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 21 and 27.
Explanation
Updated
The counter is used to count the number of Timing Advance values (28 to
34) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 28 and 34.
11-78
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
The counter is used to count the number of Timing Advance values (35 to
40) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 35 and 40.
Explanation
Updated
The counter is used to count the number of Timing Advance values (41 to
50) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 41 and 50.
Explanation
Updated
11-79
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of Timing Advance values (51 to
80) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 51 and 80.
Explanation
Updated
The counter is used to count the number of Timing Advance values (81 to
MAX) transmitted by the eNB to UEs.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB sends the message2 to the UE and the TA absolute
value therein ranges between 81 and Max.
Explanation
The counter provides the number of TA value which ranges between 81 and
MAX in message2 transmitted by eNodeB to UEs. The value unit is 16Ts.
Updated
Sampling Interval
15 min
Counter Type
Maximum
Unit
16 Ts
11-80
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB sends the message2 to the UE, the TA value is includes
in the message2. The counter provides the maximum of TA value in
message2.
Updated
The counter is replaced with the current value when the current TA value is
larger than the prior at sampling point.
11.15 Msg2
11.15.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373444755
C373444756
C373444759
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-81
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11.16 NI
11.16.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373586700
RB0 Maximum NI
11-82
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
2
C373586701
RB1 Maximum NI
C373586702
RB2 Maximum NI
C373586703
RB3 Maximum NI
C373586704
RB4 Maximum NI
C373586705
RB5 Maximum NI
C373586706
RB6 Maximum NI
C373586707
RB7 Maximum NI
C373586708
RB8 Maximum NI
10
C373586709
RB9 Maximum NI
11
C373586710
RB10 Maximum NI
12
C373586711
RB11 Maximum NI
13
C373586712
RB12 Maximum NI
14
C373586713
RB13 Maximum NI
15
C373586714
RB14 Maximum NI
16
C373586715
RB15 Maximum NI
17
C373586716
RB16 Maximum NI
18
C373586717
RB17 Maximum NI
19
C373586718
RB18 Maximum NI
20
C373586719
RB19 Maximum NI
21
C373586720
RB20 Maximum NI
22
C373586721
RB21 Maximum NI
23
C373586722
RB22 Maximum NI
24
C373586723
RB23 Maximum NI
25
C373586724
RB24 Maximum NI
26
C373586725
RB25 Maximum NI
27
C373586726
RB26 Maximum NI
28
C373586727
RB27 Maximum NI
29
C373586728
RB28 Maximum NI
30
C373586729
RB29 Maximum NI
31
C373586730
RB30 Maximum NI
32
C373586731
RB31 Maximum NI
33
C373586732
RB32 Maximum NI
11-83
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
34
C373586733
RB33 Maximum NI
35
C373586734
RB34 Maximum NI
36
C373586735
RB35 Maximum NI
37
C373586736
RB36 Maximum NI
38
C373586737
RB37 Maximum NI
39
C373586738
RB38 Maximum NI
40
C373586739
RB39 Maximum NI
41
C373586740
RB40 Maximum NI
42
C373586741
RB41 Maximum NI
43
C373586742
RB42 Maximum NI
44
C373586743
RB43 Maximum NI
45
C373586744
RB44 Maximum NI
46
C373586745
RB45 Maximum NI
47
C373586746
RB46 Maximum NI
48
C373586747
RB47 Maximum NI
49
C373586748
RB48 Maximum NI
50
C373586749
RB49 Maximum NI
51
C373586750
RB50 Maximum NI
52
C373586751
RB51 Maximum NI
53
C373586752
RB52 Maximum NI
54
C373586753
RB53 Maximum NI
55
C373586754
RB54 Maximum NI
56
C373586755
RB55 Maximum NI
57
C373586756
RB56 Maximum NI
58
C373586757
RB57 Maximum NI
59
C373586758
RB58 Maximum NI
60
C373586759
RB59 Maximum NI
61
C373586760
RB60 Maximum NI
62
C373586761
RB61 Maximum NI
63
C373586762
RB62 Maximum NI
64
C373586763
RB63 Maximum NI
65
C373586764
RB64 Maximum NI
11-84
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
66
C373586765
RB65 Maximum NI
67
C373586766
RB66 Maximum NI
68
C373586767
RB67 Maximum NI
69
C373586768
RB68 Maximum NI
70
C373586769
RB69 Maximum NI
71
C373586770
RB70 Maximum NI
72
C373586771
RB71 Maximum NI
73
C373586772
RB72 Maximum NI
74
C373586773
RB73 Maximum NI
75
C373586774
RB74 Maximum NI
76
C373586775
RB75 Maximum NI
77
C373586776
RB76 Maximum NI
78
C373586777
RB77 Maximum NI
79
C373586778
RB78 Maximum NI
80
C373586779
RB79 Maximum NI
81
C373586780
RB80 Maximum NI
82
C373586781
RB81 Maximum NI
83
C373586782
RB82 Maximum NI
84
C373586783
RB83 Maximum NI
85
C373586784
RB84 Maximum NI
86
C373586785
RB85 Maximum NI
87
C373586786
RB86 Maximum NI
88
C373586787
RB87 Maximum NI
89
C373586788
RB88 Maximum NI
90
C373586789
RB89 Maximum NI
91
C373586790
RB90 Maximum NI
92
C373586791
RB91 Maximum NI
93
C373586792
RB92 Maximum NI
94
C373586793
RB93 Maximum NI
95
C373586794
RB94 Maximum NI
96
C373586795
RB95 Maximum NI
97
C373586796
RB96 Maximum NI
11-85
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
98
C373586797
RB97 Maximum NI
99
C373586798
RB98 Maximum NI
100
C373586799
RB99 Maximum NI
101
C373586800
RB0 Average NI
102
C373586801
RB1 Average NI
103
C373586802
RB2 Average NI
104
C373586803
RB3 Average NI
105
C373586804
RB4 Average NI
106
C373586805
RB5 Average NI
107
C373586806
RB6 Average NI
108
C373586807
RB7 Average NI
109
C373586808
RB8 Average NI
110
C373586809
RB9 Average NI
111
C373586810
RB10 Average NI
112
C373586811
RB11 Average NI
113
C373586812
RB12 Average NI
114
C373586813
RB13 Average NI
115
C373586814
RB14 Average NI
116
C373586815
RB15 Average NI
117
C373586816
RB16 Average NI
118
C373586817
RB17 Average NI
119
C373586818
RB18 Average NI
120
C373586819
RB19 Average NI
121
C373586820
RB20 Average NI
122
C373586821
RB21 Average NI
123
C373586822
RB22 Average NI
124
C373586823
RB23 Average NI
125
C373586824
RB24 Average NI
126
C373586825
RB25 Average NI
127
C373586826
RB26 Average NI
128
C373586827
RB27 Average NI
129
C373586828
RB28 Average NI
11-86
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
130
C373586829
RB29 Average NI
131
C373586830
RB30 Average NI
132
C373586831
RB31 Average NI
133
C373586832
RB32 Average NI
134
C373586833
RB33 Average NI
135
C373586834
RB34 Average NI
136
C373586835
RB35 Average NI
137
C373586836
RB36 Average NI
138
C373586837
RB37 Average NI
139
C373586838
RB38 Average NI
140
C373586839
RB39 Average NI
141
C373586840
RB40 Average NI
142
C373586841
RB41 Average NI
143
C373586842
RB42 Average NI
144
C373586843
RB43 Average NI
145
C373586844
RB44 Average NI
146
C373586845
RB45 Average NI
147
C373586846
RB46 Average NI
148
C373586847
RB47 Average NI
149
C373586848
RB48 Average NI
150
C373586849
RB49 Average NI
151
C373586850
RB50 Average NI
152
C373586851
RB51 Average NI
153
C373586852
RB52 Average NI
154
C373586853
RB53 Average NI
155
C373586854
RB54 Average NI
156
C373586855
RB55 Average NI
157
C373586856
RB56 Average NI
158
C373586857
RB57 Average NI
159
C373586858
RB58 Average NI
160
C373586859
RB59 Average NI
161
C373586860
RB60 Average NI
11-87
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
162
C373586861
RB61 Average NI
163
C373586862
RB62 Average NI
164
C373586863
RB63 Average NI
165
C373586864
RB64 Average NI
166
C373586865
RB65 Average NI
167
C373586866
RB66 Average NI
168
C373586867
RB67 Average NI
169
C373586868
RB68 Average NI
170
C373586869
RB69 Average NI
171
C373586870
RB70 Average NI
172
C373586871
RB71 Average NI
173
C373586872
RB72 Average NI
174
C373586873
RB73 Average NI
175
C373586874
RB74 Average NI
176
C373586875
RB75 Average NI
177
C373586876
RB76 Average NI
178
C373586877
RB77 Average NI
179
C373586878
RB78 Average NI
180
C373586879
RB79 Average NI
181
C373586880
RB80 Average NI
182
C373586881
RB81 Average NI
183
C373586882
RB82 Average NI
184
C373586883
RB83 Average NI
185
C373586884
RB84 Average NI
186
C373586885
RB85 Average NI
187
C373586886
RB86 Average NI
188
C373586887
RB87 Average NI
189
C373586888
RB88 Average NI
190
C373586889
RB89 Average NI
191
C373586890
RB90 Average NI
192
C373586891
RB91 Average NI
193
C373586892
RB92 Average NI
11-88
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
194
C373586893
RB93 Average NI
195
C373586894
RB94 Average NI
196
C373586895
RB95 Average NI
197
C373586896
RB96 Average NI
198
C373586897
RB97 Average NI
199
C373586898
RB98 Average NI
200
C373586899
RB99 Average NI
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-90
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-91
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-92
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-93
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-94
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-95
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-96
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-97
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-98
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-99
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-100
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-101
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-102
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-103
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-104
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-105
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-106
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-107
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-108
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-109
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-110
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-111
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-112
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-113
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-114
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-115
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-116
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-117
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-118
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-119
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-120
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-121
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-122
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-123
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-124
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-125
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-126
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
11-127
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
11-128
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Maximum
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99). Take the maximum NI of RBx(x=0,1,,99) as
the sampling value.
Updated
The counter is replaced with the current value when the current NI of
RBx(x=0,1,,99) is larger than the prior at sampling point.
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-129
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-131
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-133
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-135
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-137
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-139
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-141
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-143
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-145
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-147
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-149
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-151
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-153
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-155
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-157
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-159
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-161
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-163
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-165
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
11-167
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1 ms
Counter Type
Average
Unit
dBm
Measurement Object
Cell
Sampling Point
Explanation
When the eNodeB receives the UL data from the UE, PHY detect the
NI of RBx(x=0,1,,99).Take the average NI of RBx(x=0,1,,99) as the
sampling value.
Updated
11.17 ICIC
11.17.1 Flow Charts and Sampling Points
No chart.
Counter
Counter Name
Number
1
C373566450
C373566451
C373566452
C373566453
C373566454
C373566455
C373566456
C373566457
C373566458
10
C373566459
11
C373566460
12
C373566461
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
13
C373566462
14
C373566463
15
C373566464
16
C373566465
17
C373566466
18
C373566467
19
C373566468
20
C373566469
21
C373566470
22
C373566471
23
C373566472
24
C373566473
25
C373566474
26
C373566475
27
C373566476
28
C373566477
29
C373566478
30
C373566479
31
C373566480
32
C373566481
33
C373566482
34
C373566483
35
C373566484
36
C373566485
37
C373566486
38
C373566487
39
C373566488
40
C373566489
41
C373566490
42
C373566491
43
C373566492
44
C373566493
11-170
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
45
C373566494
46
C373566495
47
C373566496
48
C373566497
49
C373566498
50
C373566499
51
C373566500
52
C373566501
53
C373566502
54
C373566503
The counter is used to count the average number of cell edge user.
Sampling Interval
100 ms
Counter Type
Average
Unit
Unit
Measurement Object
Cell
Sampling Point
The eNodeB sheduler collects the number of UEs which is "active state" at
sampling time in cell edge.
Explanation
The active state indicates the user is always active if the short DRX is
configured to UE. And if the long DRX is configured to UE, the user
is active when having traffic and DRX high level.Otherwise the user is
inactive. The counter provides the average value of all sampling point
in the measurement period.
Updated
The counter is updated by accumulating all the sample active state UEs,
and then dividing the sum by the measurement period.
The counter is used to count the average cell edge throughput on the
downlink.
11-171
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB physical layer sends data to the air in cell edge.
Explanation
Updated
The counter is used to count the average cell edge throughput on the
uplink.
Sampling Interval
1s
Counter Type
Average
Unit
Kbps
Measurement Object
Cell
Sampling Point
When the eNodeB physical layer receives data from the air in cell edge.
Explanation
Uplink PHY traffic on the sampling point = the size of TBs. That includes
retransmission TBs. The counter takes the average value of all sampling
granularities in the statistical period.
Updated
The counter is used to count the number of PDSCH PRB in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
11-172
SJ-20121224143652-001|20130925(R1.6)
Explanation
It is all available PRBs that eNodeB have assigned for PDSCH on the
downlink in cell edge.
Updated
The counter is increased by the PRB number used for PDSCH channel at
sampling point.
The counter is used to count the number of PUSCH PRB in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
It is all available PRBs that eNodeB have assigned for PUSCH on the
uplink in cell edge.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB DL scheduler allocates the CCE aggregation level 1 for
PDCCH in cell edge.
Explanation
The counter provides the number of CCE aggregation level 1 for PDCCH
in cell edge.
Updated
11-173
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB DL scheduler allocates the CCE aggregation level 2 for
PDCCH in cell edge.
Explanation
The counter provides the number of CCE aggregation level 2 for PDCCH
in cell edge.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
When the eNodeB DL scheduler allocates the CCE aggregation level 4 for
PDCCH in cell edge.
Explanation
The counter provides the number of CCE aggregation level 4 for PDCCH
in cell edge.
Updated
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
11-174
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
Cell
Sampling Point
When the eNodeB DL scheduler allocates the CCE aggregation level 8 for
PDCCH in cell edge.
Explanation
The counter provides the number of CCE aggregation level 8 for PDCCH
in cell edge.
Updated
The counter is used to count the total number of TBs transmitted on the
downlink in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB send a transport block to the UE, it will receive HARQ
feedback information from the UE. If the HARQ feedback is NACK or DTX
in cell edge, it is added to the counter.
Updated
The counter is used to count the number of faulty TBs transmitted on the
downlink in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB send a transport block to the UE, it will receive HARQ
feedback information from the UE. No matter the HARQ feedback is
ACK,NACK or DTX in cell edge, it is added to the counter.
11-175
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is used to count the total number of TBs transmitted on the
uplink in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB received a transport block from the UE, it will reply
HARQ feedback information to the UE. If the HARQ feedback is NACK or
DTX in cell edge, it is added to the counter.
Updated
The counter is used to count the number of faulty TBs transmitted on the
uplink in cell edge.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
After the eNodeB received a transport block from the UE, it will reply
HARQ feedback information to the UE. No matter the HARQ feedback is
ACK,NACK or DTX in cell edge, it is added to the counter.
Updated
11-176
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (0%
to 5%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (6% to
10%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-177
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (11% to
15%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (16% to
20%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-178
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (21% to
25%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (26% to
30%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-179
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (31% to
35%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (36% to
40%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-180
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (41% to
45%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (46% to
50%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-181
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (51% to
55%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (56% to
60%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-182
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (61% to
65%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (66% to
70%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-183
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (71% to
75%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (76% to
80%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-184
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (81% to
85%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (86% to
90%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-185
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the RNTP percentage (91% to
95%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the RNTP percentage (96% to
100%) that exceeds the threshold.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-186
SJ-20121224143652-001|20130925(R1.6)
The counter is used to count the number of the HII percentage (0% to 5%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the HII percentage (6% to 10%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of the HII percentage (11%
to 15%).
11-187
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 11% to 15%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (16% to
20%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 16% to 20%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (21% to
25%).
11-188
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 21% to 25%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (26% to
30%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 26% to 30%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (31% to
35%).
11-189
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 31% to 35%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (36% to
40%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 36% to 40%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (41% to
45%).
11-190
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 41% to 45%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (46% to
50%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 46% to 50%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (51% to
55%).
11-191
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 51% to 55%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (56% to
60%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 56% to 60%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (61% to
65%).
11-192
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 61% to 65%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (66% to
70%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 66% to 70%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (71% to
75%).
11-193
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 71% to 75%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (76% to
80%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 76% to 80%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (81% to
85%).
11-194
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 81% to 85%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (86% to
90%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 86% to 90%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (91% to
95%).
11-195
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
When the being 1 percentage of HII bitmap is in range of 91% to 95%, the
counter is incremented by 1.
The counter is used to count the number of the HII percentage (96% to
100%).
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the time that that NI exceeds the threshold.
Sampling Interval
1 ms
11-196
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Accumulative
Unit
ms
Measurement Object
Cell
Sampling Point
Explanation
The eNodeB collect the NI of all RBs at sampling time and get the average
NI about all RB. If the average NI is larger the threshold, the counter is
incremented by the sampling period.
Updated
When the NI of RBs detected by eNodeB exceed the threshold, the counter
is incremented by the sampling period.
Counter
Counter Name
Number
1
C373424688
C373424689
C373424690
C373424691
The counter is used to count the number of TTI bundling activation request.
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-198
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
Cell
Sampling Point
Explanation
Updated
11-199
SJ-20121224143652-001|20130925(R1.6)
11-200
SJ-20121224143652-001|20130925(R1.6)
Chapter 12
Statistics of Paging
Table of Contents
Paging......................................................................................................................12-1
12.1 Paging
12.1.1 Flow Charts and Sampling Points
Figure 12-1 Paging
Sampling Point 1: When the eNodeB receives the Paging message from the MME.
Counter
Counter Name
Number
1
C373394400
C373394401
C373394402
The counter is used to count the number of paging message from the MME.
12-1
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the eNodeB receives the paging message from the MME.
Explanation
Updated
The counter is used to count the number of paging records that are
discarded by the eNodeB.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
Explanation
Updated
The counter is used to count the number of paging records that are
congested at the eNodeB for paging occasions.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Unit
Measurement Object
Cell
Sampling Point
When the paging records that are congested at the eNodeB for paging
occasions.
12-2
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
12-3
SJ-20121224143652-001|20130925(R1.6)
12-4
SJ-20121224143652-001|20130925(R1.6)
Chapter 13
Statistics of Transport
Resources
Table of Contents
Throughput on IP Pair ..............................................................................................13-1
Vlan Throughput on IP Pair ......................................................................................13-3
Dscp Throughput on IP Pair .....................................................................................13-6
Total Throughput on eNodeB....................................................................................13-8
SCTP Link..............................................................................................................13-20
OAM Link ...............................................................................................................13-21
Counter
Counter Name
Number
1
C373840000
C373840001
C373840002
C373840003
Sampling Interval
10 s
13-1
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the current throughput
of ip pair transmitted by transport layer is larger than the prior at sampling
point.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair
Sampling Point
When the data is received on the transmission layer IP pairs of the eNodeB.
Explanation
Updated
The counter is replaced with the current value when the current received
throughput in ip pair is larger than the prior at sampling point.
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair
Sampling Point
When the data is received on the transmission layer IP pairs of the eNodeB.
Explanation
Updated
Counter
Counter Name
Number
1
C373900000
C373900001
C373900002
C373900003
13-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair Vlan
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the current throughput
of ip pair transmitted by transport layer is larger than the prior at sampling
point.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair Vlan
Sampling Point
When the data is received on the current VLAN of the transmission layer
IP pairs of the eNodeB.
Explanation
Updated
The counter is replaced with the current value when the current received
throughput in ip pair is larger than the prior at sampling point.
13-4
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair Vlan
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair Vlan
Sampling Point
When the data is received on the current VLAN of the transmission layer
IP pairs of the eNodeB.
Explanation
Updated
13-5
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373850000
C373850001
C373850002
C373850003
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair Dscp
Sampling Point
Explanation
Updated
The counter is replaced with the current value when the current throughput
of ip pair transmitted by transport layer is larger than the prior at sampling
point.
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
IP Pair Dscp
Sampling Point
When the data is received on the current DSCP of the transmission layer
IP pairs of the eNodeB.
Explanation
Updated
The counter is replaced with the current value when the current received
throughput in ip pair is larger than the prior at sampling point.
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair Dscp
Sampling Point
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
IP Pair Dscp
13-7
SJ-20121224143652-001|20130925(R1.6)
Sampling Point
When the data is received on the current DSCP of the transmission layer
IP pairs of the eNodeB.
Explanation
Updated
Counter
Counter Name
Number
1
C373930000
C373930001
C373930002
C373930003
C373930004
C373930005
C373930006
C373930007
C373930008
10
C373930009
11
C373930010
12
C373930011
13
C373930012
14
C373930013
15
C373930014
16
C373930015
17
C373930016
13-8
SJ-20121224143652-001|20130925(R1.6)
NO.
Counter
Counter Name
Number
18
C373930017
19
C373930018
20
C373930019
21
C373930020
22
C373930021
23
C373930022
24
C373930023
25
C373930024
26
C373930025
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the signaling message in sctp link to the MME.
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
13-9
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the signaling in sctp link from the MME.
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the signaling in sctp link to another eNodeB.
Explanation
At sampling time, the eNodeB collects the transport UL volume sent to the
target eNodeB on SCTP link from the previous sampling time to the current
sampling time. The counter provides the average value of all sampling
point in the measurement period.
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the signaling in sctp link from another eNodeB.
13-10
SJ-20121224143652-001|20130925(R1.6)
Explanation
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
At sampling time, the eNodeB collects the transport volume sent to the
OMC from the previous sampling time to the current sampling time.
The counter provides the average value of all sampling point in the
measurement period.
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
At sampling time, the eNodeB collects the transport volume received from
the OMC on SCTP link from the previous sampling time to the current
sampling time. The counter provides the average value of all sampling
point in the measurement period.
Updated
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the signaling message in sctp link to the MME.
Explanation
At sampling time, the eNodeB collects the transport UL volume sent to the
MME on SCTP link from the previous sampling time to the current sampling
time.The counter provides the maximum value in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the signaling in sctp link from the MME.
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
13-12
SJ-20121224143652-001|20130925(R1.6)
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends the signaling in sctp link to another eNodeB.
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives the signaling in sctp link from another eNodeB.
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
At sampling time, the eNodeB collects the transport volume sent to the
OMC from the previous sampling time to the current sampling time.The
counter provides the maximum value in the measurement period.
13-13
SJ-20121224143652-001|20130925(R1.6)
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When there are user plane data transmitted from The eNodeB to the SGW.
Explanation
At sampling time, the eNodeB collects the transport traffic volume sent to
the SGW on the uplink from the previous sampling time to the current
sampling time. The counter provides the average value of all sampling
point in the measurement period.
Updated
13-14
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When The eNodeB receives the user plane data from the SGW.
Explanation
At sampling time, the eNodeB collects the transport traffic volume received
from the SGW on the downlink from the previous sampling time to the
current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When there are user plane data transmitted from the source eNodeB to
the target eNodeB.
Explanation
At sampling time, the eNodeB collects the transport traffic volume sent
to the target eNodeB on the uplink from the previous sampling time to
the current sampling time. The counter provides the average value of all
sampling point in the measurement period.
Updated
Sampling Interval
10 s
13-15
SJ-20121224143652-001|20130925(R1.6)
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
At sampling time, the eNodeB collects the transport traffic volume received
from the target eNodeB on the downlink from the previous sampling time
to the current sampling time. The counter provides the average value of
all sampling point in the measurement period.
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends other data, which are not included in the
S1/X2/OAM data.
Explanation
At sampling time, the eNodeB collects the transport other volume from the
previous sampling time to the current sampling time. The counter provides
the average value of all sampling point in the measurement period.
Updated
Sampling Interval
10 s
Counter Type
Average
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives other data, which are not included in the
S1/X2/OAM data.
13-16
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the transport other volume received
on the downlink from the previous sampling time to the current sampling
time. The counter provides the average value of all sampling point in the
measurement period.
Updated
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When there are user plane data transmitted from The eNodeB to the SGW.
Explanation
At sampling time, the eNodeB collects the transport volume sent to the
SGW on the uplink from the previous sampling time to the current sampling
time.The counter provides the maximum value in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When The eNodeB receives the user plane data from the SGW.
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
13-17
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When there are user plane data transmitted from The eNodeB to The
eNodeB.
Explanation
At sampling time, the eNodeB collects the transport traffic volume sent to
the target eNodeB on the uplink from the previous sampling time to the
current sampling time.The counter provides the maximum value in the
measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
Explanation
At sampling time, the eNodeB collects the transport traffic volume received
from the target eNodeB on the downlink from the previous sampling time
to the current sampling time.The counter provides the maximum value
in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
13-18
SJ-20121224143652-001|20130925(R1.6)
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB sends other data, which are not included in the
S1/X2/OAM data.
Explanation
At sampling time, the eNodeB collects the transport other volume sent
from the previous sampling time to the current sampling time. The counter
provides the maximum value in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When the eNodeB receives other data, which are not included in the
S1/X2/OAM data.
Explanation
At sampling time, the eNodeB collects the transport other volume received
on the downlink from the previous sampling time to the current sampling
time. The counter provides the maximum value in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When The eNodeB receives the user plane data from the SGW.
13-19
SJ-20121224143652-001|20130925(R1.6)
Explanation
At sampling time, the eNodeB collects the transport volume sent on the
uplink from the previous sampling time to the current sampling time.The
counter provides the maximum value in the measurement period.
Updated
The counter is replaced by the current value when it is larger than the
counter.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Mbps
Measurement Object
eNodeB
Sampling Point
When there are user plane data transmitted from The eNodeB to the SGW.
Explanation
Updated
The counter is replaced by the current value when it is larger than the
counter.
Counter
Counter Name
Number
1
C373920000
C373920001
13-20
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
IP Sctp
Sampling Point
Explanation
The peirod heartbeat message will be send in the SCTP link.If the
heartbeat is detected abnormally, the eNodeB will report the link fault and
statics the disconnection.
Updated
The counter is used to count the time SCTP link has been available.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Measurement Object
IP Sctp
Sampling Point
The eNodeB collects the SCTP link service time at sampling time
according to "Explanation".
Explanation
Updated
The counter is incremented by the SCTP link service time at sampling point.
disconnection times and the normal service time is reflected by the available time of OAM
link.
Counter
Counter Name
Number
1
C373950430
C373950431
Sampling Interval
Event triggered
Counter Type
Accumulative
Unit
Times
Measurement Object
eNodeB
Sampling Point
When the link between the eNodeB and the OMC is detected breakdown
by eNodeB.
Explanation
The peirod heartbeat message will be send in the link between eNodeB
and OMC. If the heartbeat is detected abnormally, the eNodeB will report
the link fault and statics the disconnection.
Updated
The counter is incremented by 1 when the link between the eNodeB and
the OMC is detected breakdown by eNodeB.
The counter is used to count the time OAM link has been available.
Sampling Interval
15 min
Counter Type
Accumulative
Unit
Measurement Object
eNodeB
Sampling Point
When the eNodeB successfully setup the OAM link, record the start time;
When the eNodeB detect the OAM link abnormal, record the end time.The
OAM link service time is equal to the interval from the start time to the
end time.
13-22
SJ-20121224143652-001|20130925(R1.6)
Explanation
The OAM link refer to the link from the eNodeB to the OMC.
Updated
13-23
SJ-20121224143652-001|20130925(R1.6)
13-24
SJ-20121224143652-001|20130925(R1.6)
Chapter 14
Statistics of System
Resources
Table of Contents
CPU Resources .......................................................................................................14-1
Memory Resources ..................................................................................................14-3
Counter
Counter Name
Number
1
C373940400
C373940401
C373940402
The counter is used to count the peak usage of the main processor during
the granularity period.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Percent
Measurement Object
eNodeB
Sampling Point
SJ-20121224143652-001|20130925(R1.6)
Explanation
The CPU utilization rate refers to the ratio of the time of main cpu running
and the total time. The eNodeB collects the cpu usage at per sampling
time. The counter provides the maximum value in the measurement period.
Updated
The counter is replaced with the new value when the CPU utilization rate in
a sampling point is larger than the counter.
The counter is used to count the mean usage of the main processor during
the granularity period.
Sampling Interval
10 s
Counter Type
Average
Unit
Percent
Measurement Object
eNodeB
Sampling Point
Explanation
The CPU utilization rate refers to the ratio of the time of main cpu running
and the total time. The eNodeB collects the cpu usage at per sampling
time. The counter provides the average value of all sampling point in the
measurement period.
Updated
The counter is used to count the overload time of the main processor.
Sampling Interval
10 s
Counter Type
Accumulative
Unit
Measurement Object
eNodeB
Sampling Point
When the CPU load is higher than the threshold at sampling time.
Explanation
The CPU utilization rate refers to the ratio of the time of main cpu running
and the total time. The eNodeB collects the cpu usage at per sampling
time and compare it with the threshold. If it is higher than the threshold, the
counter is incremented by the sampling period.
Updated
14-2
SJ-20121224143652-001|20130925(R1.6)
Counter
Counter Name
Number
1
C373940403
C373940404
C373940405
The counter is used to count the peak usage of memory during the
granularity period.
Sampling Interval
10 s
Counter Type
Maximum
Unit
Percent
Measurement Object
eNodeB
Sampling Point
Explanation
The memory utilization rate refers to the ratio of the number of used
memory and the total number of memory. The eNodeB collects the
memory usage at per sampling time. The counter provides the maximum
value in the measurement period.
Updated
The counter is replaced with the new value when the memory utilization
rate in a sampling point is larger than the counter.
The counter is used to count the mean usage of memory during the
granularity period.
14-3
SJ-20121224143652-001|20130925(R1.6)
Sampling Interval
10 s
Counter Type
Average
Unit
Percent
Measurement Object
eNodeB
Sampling Point
Explanation
The memory utilization rate refers to the ratio of the number of used
memory and the total number of memory. The eNodeB collects the
memory usage at per sampling time. The counter provides the average
value of all sampling point in the measurement period.
Updated
Sampling Interval
10 s
Counter Type
Accumulative
Unit
Measurement Object
eNodeB
Sampling Point
Explanation
The memory utilization rate refers to the ratio of the number of used
memory and the total number of memory. The eNodeB collects the memory
usage at per sampling time and compare it with the threshold. If it is higher
than the threshold, the counter is incremented by the sampling period.
Updated
14-4
SJ-20121224143652-001|20130925(R1.6)
Figures
Figure 1-1 RRC Connection Establishment............................................................... 1-2
Figure 1-2 RRC Connection Re-Establishment ....................................................... 1-15
Figure 1-3 RRC Connection again Re-Establishment.............................................. 1-16
Figure 1-4 RRC Connection Re-configuration ......................................................... 1-32
Figure 1-5 RRC Connection Release ...................................................................... 1-36
Figure 1-6 RRC Connection Number ...................................................................... 1-44
Figure 1-7 RRC Connection Number ...................................................................... 1-49
Figure 1-8 RRC Connection Setup Time ................................................................. 1-51
Figure 1-9 RRC Connection Setup to Reconfiguration Time.................................... 1-52
Figure 2-1 Initial E-RAB Setup .................................................................................. 2-2
Figure 2-2 Additional E-RAB Setup ......................................................................... 2-46
Figure 2-3 E-RAB Modification................................................................................ 2-88
Figure 2-4 E-RAB Release.................................................................................... 2-130
Figure 2-5 E-RAB Setup Time(1) .......................................................................... 2-280
Figure 2-6 E-RAB Setup Time(2) .......................................................................... 2-280
Figure 3-1 UE Context Setup .................................................................................... 3-2
Figure 3-2 UE Context Modification........................................................................... 3-8
Figure 3-3 UE Context Release .............................................................................. 3-12
Figure 3-4 Security Mode........................................................................................ 3-22
Figure 4-1 UE-associated Logical S1-connection ...................................................... 4-1
Figure 4-2 S1 Error Indication ................................................................................... 4-3
Figure 8-1 LTE-UTRAN Redirection .......................................................................... 8-1
Figure 8-2 LTE-CDMA Redirection............................................................................ 8-4
Figure 8-3 LTE-GSM Redirection .............................................................................. 8-8
Figure 9-1 Intra-eNB Handover ................................................................................. 9-2
Figure 9-2 X2 Handover(1) ..................................................................................... 9-12
Figure 9-3 X2 Handover(2) ..................................................................................... 9-13
Figure 9-4 S1 Handover(1) ..................................................................................... 9-25
Figure 9-5 S1 Handover(2) ..................................................................................... 9-27
Figure 9-6 Intra-eNB Handover ............................................................................... 9-38
Figure 9-7 X2 Handover(1) ..................................................................................... 9-48
Figure 9-8 X2 Handover(2) ..................................................................................... 9-49
I
SJ-20121224143652-001|20130925(R1.6)
II
SJ-20121224143652-001|20130925(R1.6)
Figures
III
SJ-20121224143652-001|20130925(R1.6)