Вы находитесь на странице: 1из 12

Re Imaging Church

Computers
to Windows 7

Things Needed..

Bootable Flash Drive 16 GB(Installer)

Flash Drive for Backup

Phases in Re Imaging

Backup!

BIOS SET UP

RE IMAGING PROPER

INSTALLATION OF CHURCH APPLICATIONS


e.g. MLS

BIOS SET UP
To enter BIOS setup press F2

just
after pressing the power
button or switiching the
computer ON

BIOS SCREEN

What to change in the setup?

Disable Secure Boot


>> Click +Secure Boot and click Disable Radio
Button

Enable Legacy ROM support boot


>> Click +General and find Advanced Boot
option click Enable Radio Button

CLICK APPLY and EXIT

BIOS SET UP
To enter BIOS setup press F2

just
after pressing the power
button or switiching the
computer ON

Changing UEFI to Legacy Mode

Click +General find Boot Sequence


>>Click the Legacy radio Button to Enable

APPLY and EXIT

RE IMAGING PROPER

TURN OFF THE COMPUTER AFTER


SETTING UP THE BIOS.
INSERT THE BOOTABLE FLASH DRIVE THAT
CONTAINS THE WINDOWS 7 IMAGE FILE
INTO THE USB PORT OF THE SYSTEM
UNIT(CPU).
TURN ON THE COMPUTER AGAIN AND
PRESS F12.

Continuation...
After pressing the F12 key you will be redirected to
boot selection device List.
Select USB STORAGE DEVICE using the arrow
keys and press enter to select it.
This will bring you to the screen where you just do a
one click process and wait until the Re Imaging
process will finish.

INSTALLATION OF APPLICATION

Open the flash drive and open the data folder.


The data folder contains all the important and
necessary applications needed in our church
transactions. Install all the applications that you
can see in that folder.
Don't forget to Install MLS.

THE END

Вам также может понравиться