0 оценок0% нашли этот документ полезным (0 голосов)
258 просмотров1 страница
The TDA2051 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Thanks to its high power capability the TDA 2051 is able to provide up to 40W typ. Into 4 ohm load @ THD = 10%, VS = +-18V, f = 1KHz. The very low harmonic and crossover distortion TEST AND APPLICATION CIRCUIT performances make the device the most suitable for hi-fi
The TDA2051 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Thanks to its high power capability the TDA 2051 is able to provide up to 40W typ. Into 4 ohm load @ THD = 10%, VS = +-18V, f = 1KHz. The very low harmonic and crossover distortion TEST AND APPLICATION CIRCUIT performances make the device the most suitable for hi-fi
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
The TDA2051 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Thanks to its high power capability the TDA 2051 is able to provide up to 40W typ. Into 4 ohm load @ THD = 10%, VS = +-18V, f = 1KHz. The very low harmonic and crossover distortion TEST AND APPLICATION CIRCUIT performances make the device the most suitable for hi-fi
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
(60W/4Ω MUSIC POWER IEC 268.3 RULES) HIGH OPERATING SUPPLY VOLTAGE (±25V) SINGLE OR SPLIT SUPPLY OPERATIONS VERY LOW DISTORTION SHORT CIRCUIT PROTECTION (OUT TO GND) THERMAL SHUTDOWN PENTAWATT V DESCRIPTION ORDERING NUMBERS: TDA2051V The TDA 2051 is a monolithic integrated circuit in TDA2051H Pentawatt package, intended for use as an audio class AB amplifier. Thanks to its high power capa- bility the TDA2051 is able to provide up to 40W typ. into 4 ohm load @ THD = 10%, VS = ±18V, f performances make the device the most suitable = 1KHz and up to 33W into 8ohm load @ THD = for Hi-Fi field application. 10%, VS = ±22V, f = 1KHz. The low external component count and the good Moreover, the TDA 2051 delivers typically 60W power dissipation capability of the Pentawatt music power into 4 ohm load over 1 sec at VS= Package allowes stereo sets reduced in 22.5V, f = 1KHz. cost/space due to both, low number of external parts and reduced heatsink area due to optimized The very low harmonic and crossover distortion heatsink efficiency.
TEST AND APPLICATION CIRCUIT
March 1991 1/1
This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice.