Sequence of Basic Job Steps / Activity Cleaning Concrete surfaces
Potential Accidents or Hazards
Slips, trips or falls Eye / body injury from flying materials Breathing dust / suffocation Confined space entry
Application of filling mortar
Inhale / burn due to exposure to mortar
while mixing or applying. Polluting soil by mortar Cement splash on eye
Application Resin coating
using brush / Roller
Resin mix come in contact with hand or
other part of body / splashes to eye Inhaling of flying mix particle Fire fighting Spill control
Risk Rating
Recommended Safe Job Procedures
Provide adequate lighting inside the tank Good housekeeping inside and outside the tank Wear safety goggles (clear), hand gloves, coverall, safety shoes, etc Use particle respirator (double strap) Provide exhaust fans at two openings, to maintain air circulation Follow confined space entry JSA (Attached) Use Rubber gloves, Dust mask, safety boot and clear safety glass Ensure availability of First aid at site. Provide metal sheet / Polythene sheet at the place of mortar mixing and transferring. Remove any mortar fall or balance waste immediately to designated dumping area Wear safety goggle. Also arrange eyewash nearby.
Mixing shall be done at outside the Tank Wear respiratory protection (Organic vapour mask) Check attached MSDS for additional safety measures. Provide Fire extinguisher Spill kit to be available at site