Академический Документы
Профессиональный Документы
Культура Документы
and 7060
Commissioning Guide
2010 Siemens AG
Contents
Installing The FTP-Server: ........................................................................................................................3
Install TNMS CT (NCT) Stand Alone (Single User).................................................................................5
Installing TNMS Licenses:......................................................................................................................10
Basic Setup Of A hiT 70xx Via Console..................................................................................................16
Setting Up TNMS (NCT) For Network Element Access.........................................................................19
Basic Commissioning Of hiT 70xx..........................................................................................................26
Configuring STM Interfaces....................................................................................................................32
Configuring DCC Management...............................................................................................................34
Configuring A PDH Port (E1)..................................................................................................................35
Configuring Ethernet................................................................................................................................36
Creating A Cross Connection...................................................................................................................42
Enabling Alarms.......................................................................................................................................44
Clock Synchronization.............................................................................................................................46
Protection.................................................................................................................................................50
Saving / Restoring the MIB.....................................................................................................................61
LP-201 IP Phone Setup............................................................................................................................63
2010 Siemens AG
Start the installation. It might be necessary to have the XP installation CD/DVD at hand.
2010 Siemens AG
2010 Siemens AG
2010 Siemens AG
2010 Siemens AG
2010 Siemens AG
2010 Siemens AG
2010 Siemens AG
10
2010 Siemens AG
11
You will get a message telling you, that there's no basic license installed:
2010 Siemens AG
12
2010 Siemens AG
13
2010 Siemens AG
14
2010 Siemens AG
15
2010 Siemens AG
16
2010 Siemens AG
17
The SNMP properties dialog opens. You can leave everything on default values.
2010 Siemens AG
18
Select the correct template for your network element and fill in the settings. The two most common
ones are Universal SNMPv2 and Universal SNMPv3.
2010 Siemens AG
19
General Settings for a hiT 7060. the Universal SNMPv2 template is used.
2010 Siemens AG
20
SNMP settings for a hiT 7060. Only the node IP address is needed (passwords are
already preset).
2010 Siemens AG
21
Settings for a hiT7025. Select the Universal SNMPv3 template. The initial
password in "NSN!e2eNet4u"
2010 Siemens AG
22
This is the setup for another template called "hiT7025 4.2", suitable for NCT operation.
2010 Siemens AG
23
2010 Siemens AG
24
2010 Siemens AG
25
In case, you have only read access, you can get write access by selecting NE Security->Request
Write Access
2010 Siemens AG
26
2010 Siemens AG
27
2010 Siemens AG
28
Excerpt from a Wireshark session. You can see how the NTP client requests are followed by a NTP
server reply.
2010 Siemens AG
29
2010 Siemens AG
30
2010 Siemens AG
31
2010 Siemens AG
32
When the PDH port is properly configured, you can create a cross connection.
2010 Siemens AG
33
Configuring Ethernet
In the context sensitive menu of the ethernet card select WAN Ports TP structure. Here you have
to define the multiplexer structure of the ethernet card.
2010 Siemens AG
34
2010 Siemens AG
35
2010 Siemens AG
36
2010 Siemens AG
37
2010 Siemens AG
38
After the VLLAN IDs are assigned to the correct LAN and WAN ports, you can create a cross
connection.
2010 Siemens AG
39
2010 Siemens AG
40
2010 Siemens AG
41
Enabling Alarms
By default, Alarms are disabled. In order to enable alarms on the hiT, select <Fault->Alarm Inhibit
Configuration> and remove the marker from the first check box. If needed, you can inhibit alarms
for specific cards or ports.
2010 Siemens AG
42
2010 Siemens AG
43
Clock Synchronization
Proper clock synchronization is mandatory for SDH systems. You need at least one external clock
source (PRC) for your network. In case you don't have one, you might consider taking the clock
from a PDH signal. By default, the hiT70xx uses the internal oscillator in free running mode. To
make the multiplexer using an external timing source, you have to add one in <Configuration>Synchronization Management>.
2010 Siemens AG
44
2010 Siemens AG
45
2010 Siemens AG
46
2010 Siemens AG
47
Protection
The hiT offers different methods of protection: hardware protection and path protection. If you have
e.g. a second cross connector card for hardware protection, the active one is identified by the ACT
LED. You can manually switch the active card by selecting <Configure->CC 1+1 Protection>. When
you select Manual Switch and the selected card becomes faulty, the multiplexer will still switch
over to the other card. However, when you select Forced Switch, the automatic switchover is
deactivated.
2010 Siemens AG
48
2010 Siemens AG
49
2010 Siemens AG
50
2010 Siemens AG
51
2010 Siemens AG
52
Enter a name for the new ring, enter the number of network elements in the protected ring and click
OK.
2010 Siemens AG
53
2010 Siemens AG
54
2010 Siemens AG
55
2010 Siemens AG
56
2010 Siemens AG
57
2010 Siemens AG
58
2010 Siemens AG
59
2010 Siemens AG
60
2010 Siemens AG
61