Вы находитесь на странице: 1из 2

Product Information

Casting
Resin Plaster
Properties :
Top quality alpha plaster. Due to its exceptional hardness after drying, it is similar to polyester
resins. It is especially recommended to mould objects requiring fineness, strength and whiteness.
Professional adults.

Product Usage :
Sprinkled then dusted on a wet plaster design will give it a smooth and silky appearance.

Precision plaster or hard plaster


Properties :
Alpha plaster for artistic casts, offers accuracy and strength. Its coarser grain and its porosity
make it easy to paint. For all aduts.
Hard
Fine
No lumps and easy to paint
Very good value for money.
No lumps, limits the appearance of bubbles.

Product Usage :
Milk mixed with water will allow polishing the object while giving it a marbled appearance.

Light Plaster
Properties :
Light Plaster
Plaster of low density recommended for moulding decorations to hang. For all adulst.
Lightweight
Very economical
Easy to paint

Product Usage :
Add an acrylic colour to the water to colour the plaster in the mass. Spread throughout the
preparation, it will give it marbled effects.

Glueing plaster or restoration plaster


Properties :
The plaster is formulated for restoration is a technical plaster. Thick and very sticky, it does not
drip and adheres to most surfaces. Used in conjunction with Siligum, it is ideal to restore frames
and mouldings. For professional adults.
Does not run, can therefore work on vertical surfaces or reversed.
Very adherent
Tender: it is easy to modify the finish..

Product Usage :
Does not run, can therefore be worked on vertical or reversed surfaces.
Very adherent.
Soft: it is easy to retouch for finishes.

Reconstituted Stone
Properties :
Made from cement and fine stone aggregates, it restores perfectly after treatment, the appearance
of limestone. For all adults.
Lasts
Treat the surface in a bath of vinegar or by scraping with a metal sponge, for a stone finish.
Good resistance to moisture.

Product Usage :
Reconstituted stone
Mixing advice: 4 parts powder to 1 part water.
Beginning of setting: 15 minutes
End of setting: 30 minutes
Demoulding: 2 hours

Вам также может понравиться