Академический Документы
Профессиональный Документы
Культура Документы
General Description
The orifice plate is the most common differential pressure flow primary
element. It is based on proven technology, has no moving parts and is
suitable for high temperature and pressure applications. Orifice plates
are recommended for clean liquids, gases and low velocity steam flows.
Dimensions Materials
The outside diameter of the orifice plate is equal to the bolt circle di- Standard material grades include 316 Stainless Steel, 304 Stainless
ameter of the connecting flanges minus the diameter of the bolt. This Steel, 310 Stainless Steel, Hastelloy® C276, Hastelloy® B3, Duplex
ensures that the plate is centred accurately in the line. Stainless Steel, Super Duplex Stainless Steel, Monel® 400, Carbon
Steel, Titanium, Incoloy® 800, Incoloy® 825, Inconel® 600, Inconel® 625,
Plate thicknesses depend on line size and differential pressure, and Tantalum, PTFE and PVDF.
should be sufficient to prevent the plate from bending under operating
conditions. Recommended plate thicknesses are shown below. Please contact the sales office for other grades.
Standard plate dimensions are shown overleaf. Orifice plates can be Incoloy, Inconel and Monel and are trademarks of INCO Alloys International Inc.
Hastelloy is a trademark of Haynes International Inc.
made in accordance with customer drawings as required.
mm IN A D E A D E A D E A D E A D E A D E A D E
15 1/2 47.6 125 25 54 125 28 54 125 28 54 125 32 63.5 125 28 63.5 125 32 69.9 125 32
20 3/4 57.2 125 32 66.7 125 32 66.7 125 32 66.7 125 32 69.9 125 32 69.9 125 32 76.2 125 32
25 1 66.7 125 32 73 125 32 73 125 32 73 125 32 79.4 125 32 79.4 125 32 85.7 150 32
30 1 1/4 76.2 125 32 82.6 125 32 82.6 125 32 82.6 125 32 88.9 125 32 88.9 125 32 104.8 150 32
40 1 1/2 85.7 125 32 95.3 125 32 95.3 125 32 95.3 125 32 98.4 125 32 98.4 125 32 117.5 150 32
50 2 104.8 125 32 111.1 125 28 111.1 125 28 111.1 125 28 142.9 150 32 142.9 150 32 146 150 32
65 2 1/2 123.8 125 32 130.2 125 32 130.2 125 32 130.2 125 32 165.1 150 32 165.1 150 32 168.3 150 32
80 3 136.5 125 32 149.2 125 32 149.2 125 32 149.2 125 32 168.3 150 32 174.6 150 32 196.9 150 32
100 4 174.6 150 32 181 150 32 177.8 150 32 193.7 150 32 206.4 150 32 209.6 150 32 235 150 32
125 5 196.9 150 32 215.9 150 32 212.7 150 32 241.3 150 32 247.7 150 32 254 150 32 279.4 175 32
150 6 222.3 150 32 250.8 150 32 247.7 150 32 266.7 150 32 288.9 150 32 282.6 150 32 317.5 175 32
200 8 279.4 150 32 308 150 32 304.8 150 32 320.7 150 32 358.8 175 32 352.4 175 32 387.4 175 32
250 10 339.7 150 32 362 150 32 358.8 150 32 400 150 32 435 175 32 435 175 32 476.3 200 32
300 12 409.6 150 32 422.3 150 32 419.1 150 32 457.2 150 32 498.5 175 32 520.7 175 32 549.3 200 32
350 14 450.9 150 32 485.8 150 32 482.6 150 32 492.1 150 32 520.7 175 32 577.9 175 32 - - -
400 16 514.4 150 32 539.8 150 32 536.6 150 32 565.2 150 32 574.7 200 32 641.4 200 32 - - -
450 18 546.1 175 32 593.7 175 32 587.4 175 32 609.6 175 32 635 200 32 701.7 200 32 - - -
500 20 603.3 175 32 650.8 175 32 644.5 175 32 679.5 175 32 695.3 200 32 752.5 200 32 - - -
all dimension in mm
Dimension D
Dimension E
FLOW
Segmental Eccentric
Suitable for measurement for measurment of dirty Suitable for measurement of dirty fluids and 2
fluids and 2 phase flow - allows passage of extrane- phase flow, preferred to segmental pipelines of
ous matter. Suitable for pipes up to 350mm diameters less than 350 mm.
yy Manufactured generally to BS EN ISO 5167
yy Wide range of materials
yy Proven technology
yy Suitable for most pipe sizes
yy Orifice sizing on request
General Description
Restriction orifice plates can be used as a simple pressure reducing Orifice plates can be made in accordance with
device, or to limit the flow rate in a pipeline. They are designed to slip customer drawings as required.
between pipe flanges. Versions to suit RTJ type flanges are available.
Materials
Dimensions
Standard material grades include 316 Stainless
The outside diameter of the orifice plate is equal to the bolt circle di- Steel, 304 Stainless Steel, 310 Stainless Steel,
ameter of the connecting flanges minus the diameter of the bolt. This Hastelloy® C276, Hastelloy® B3, Duplex Stainless
ensures that the plate is centred accurately in the line. Steel, Super Duplex Stainless Steel, Monel® 400,
Carbon Steel, Titanium, Incoloy® 800, Incoloy® 825,
Plate thicknesses depend on line size and differential pressure, and Inconel® 600, Inconel® 625, Tantalum, PTFE and PVDF.
should be sufficient to prevent the plate from bending under operat-
ing conditions. Recommended plate thicknesses are shown on the Please contact the sales office for other grades.
graph below.
20 mm
40 mm
30 mm
10 mm
15 mm
3 mm
6 mm
150
145
140 Based on 316/ L
135 Stainless Steel
130
125
120
115
110
Permanent Pressure Loss (bar)
105
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500
TM
ISO9001:2008
T: +44 (0) 1656 740 551 F: +44 (0) 1656 745 915
Excellence the World can Measure TM
E: sales@rototherm.co.uk W: www.rotothermgroup.com
In keeping with British Rototherm’s policy for continual product development and improvement, we reserve the right to amend specifications without notice.
©2012 Rototherm Group. All rights reserved. Company registered in Wales : 2570730. Registered office as above.