Академический Документы
Профессиональный Документы
Культура Документы
Categories: Polymer; Thermoplastic; Polyphthalamide (PPA); Polyphthalamide (PPA), 40% Glass Fiber Reinforced
Material Notes: Zytel® HTN51G35HSL NC010 is a 35% glass reinforced, heat stabilized, lubricated high performance polyamide resin. It is also a PPA resin.
Vendors:
Innova Engineering is your leader in Thermoplatic Analysis, including Non Linear FEA and Mold Flow Simulation.
Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties Metric English Comments
Specific Gravity 1.47 g/cc 1.47 g/cc DAM; ASTM D 792
Density 1.47 g/cc 0.0531 lb/in³ DAM; ISO 1183
Filler Content 35.0 % 35.0 %
Water Absorption 0.400 % 0.400 % Immersion 24h (DAM); ASTM D 570
0.500 % 0.500 % Immersion 24h; DAM; ISO 62, Similar to
@Thickness 2.00 mm @Thickness 0.0787 in
Water Absorption at Saturation 3.50 % 3.50 % Saturation (DAM); ASTM D 570
4.50 % 4.50 % Saturation; immersed; DAM; ISO 62, Similar to
@Thickness 2.00 mm @Thickness 0.0787 in
Linear Mold Shrinkage, Flow 0.00200 cm/cm 0.00200 in/in DAM
@Thickness 15.7 mm @Thickness 0.620 in
0.00200 cm/cm 0.00200 in/in DAM; ISO 294-4
@Thickness 2.00 mm @Thickness 0.0787 in
0.00300 cm/cm 0.00300 in/in DAM
@Thickness 3.17 mm @Thickness 0.125 in
Linear Mold Shrinkage, Transverse 0.00600 cm/cm 0.00600 in/in DAM; ISO 294-4
@Thickness 2.00 mm @Thickness 0.0787 in
0.00900 cm/cm 0.00900 in/in DAM
@Thickness 3.17 mm @Thickness 0.125 in
0.00900 cm/cm 0.00900 in/in DAM
@Thickness 1.60 mm @Thickness 0.0630 in
Mechanical Properties Metric English Comments
Hardness, Rockwell M 108 108 DAM; ASTM D 785
Hardness, Rockwell R 124 124 DAM; ASTM D 785
Tensile Strength at Break 210 MPa 30500 psi 50%RH; ISO 527
220 MPa 31900 psi DAM; ISO 527
Tensile Strength, Ultimate 70.0 MPa 10200 psi DAM; ASTM D 638
@Temperature 175 °C @Temperature 347 °F
80.0 MPa 11600 psi DAM; ASTM D 638
@Temperature 150 °C @Temperature 302 °F
165 MPa 23900 psi DAM; ASTM D 638
@Temperature 100 °C @Temperature 212 °F
214 MPa 31000 psi DAM; ASTM D 638
@Temperature 23.0 °C @Temperature 73.4 °F
230 MPa 33400 psi DAM; ASTM D 638
@Temperature -40.0 °C @Temperature -40.0 °F
Elongation at Break 2.20 % 2.20 % 50%RH; ISO 527
2.40 % 2.40 % DAM; ISO 527
2.10 % 2.10 % DAM; ASTM D 638
@Temperature -40.0 °C @Temperature -40.0 °F
2.20 % 2.20 % 50%RH; ASTM D 638
@Temperature 23.0 °C @Temperature 73.4 °F
2.40 % 2.40 % DAM; ASTM D 638
@Temperature 23.0 °C @Temperature 73.4 °F
2.80 % 2.80 % DAM; ASTM D 638
@Temperature 100 °C @Temperature 212 °F
4.90 % 4.90 % DAM; ASTM D 638
@Temperature 150 °C @Temperature 302 °F
5.30 % 5.30 % DAM; ASTM D 638
@Temperature 175 °C @Temperature 347 °F
Tensile Modulus 5.40 GPa 783 ksi DAM; ASTM D 638
@Temperature 175 °C @Temperature 347 °F
7.00 GPa 1020 ksi DAM; ASTM D 638
@Temperature 150 °C @Temperature 302 °F
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were
originally entered into MatWeb.