Академический Документы
Профессиональный Документы
Культура Документы
All pipes to be supplied in length of 12 meters (+/‐ one meter)
INSPECTION PROCEDURE FOR GALVANIZE ERW PIPE.
1.100% Visual inspection of pipes for external defects by TPI/ESSAR.
2.Each pipe to be checked for outside dia , wall thickness,ovality and"
evel ends by TPI/ESSAR.
3.Co relation of pipes with raw material test certificate giving
chemical properties.
4.Random checking and witnessing of the various physical tests
Tensile strength, % elongation, Flattening , as per specified
Standards.
5.For check test Inspector may choose of his own discretion any pipe
randomlyfrom the lot offered for Hydro test, and eddy current test
subject to maximum 10 %In case of failure during the above tests,
rejection will be decided by Essar Engineer.
6.Each pipe to be marked as Manufacturer name and mark, Size, Weight
per"meter, Test pressure, End cap to be provided
7.Each of the pipes should be stencilled with PO no and date and colour
bands
8.Final despatch clerance will be given by Essar Engineer after review
of final inspection documents.
All pipes to be supplied in length of 12 meters (+/‐ one meter)
INSPECTION PROCEDURE FOR GALVANIZE ERW PIPE.
1.100% Visual inspection of pipes for external defects by TPI/ESSAR.
2.Each pipe to be checked for outside dia , wall thickness,ovality and"
evel ends by TPI/ESSAR.
3.Co relation of pipes with raw material test certificate giving
chemical properties.
4.Random checking and witnessing of the various physical tests
Tensile strength, % elongation, Flattening , as per specified
Standards.
5.For check test Inspector may choose of his own discretion any pipe
randomlyfrom the lot offered for Hydro test, and eddy current test
subject to maximum 10 %In case of failure during the above tests,
rejection will be decided by Essar Engineer.
6.Each pipe to be marked as Manufacturer name and mark, Size, Weight
per"meter, Test pressure, End cap to be provided
7.Each of the pipes should be stencilled with PO no and date and colour
bands
8.Final despatch clerance will be given by Essar Engineer after review
of final inspection documents.
All pipes to be supplied in length of 12 meters (+/‐ one meter)
INSPECTION PROCEDURE FOR GALVANIZE ERW PIPE.
1.100% Visual inspection of pipes for external defects by TPI/ESSAR.
2.Each pipe to be checked for outside dia , wall thickness,ovality and"
evel ends by TPI/ESSAR.
3.Co relation of pipes with raw material test certificate giving
chemical properties.
4.Random checking and witnessing of the various physical tests
Tensile strength, % elongation, Flattening , as per specified
Standards.
5.For check test Inspector may choose of his own discretion any pipe
randomlyfrom the lot offered for Hydro test, and eddy current test
subject to maximum 10 %In case of failure during the above tests,
rejection will be decided by Essar Engineer.
6.Each pipe to be marked as Manufacturer name and mark, Size, Weight
per"meter, Test pressure, End cap to be provided
7.Each of the pipes should be stencilled with PO no and date and colour
bands
8.Final despatch clerance will be given by Essar Engineer after review
of final inspection documents.
All pipes to be supplied in length of 12 meters (+/‐ one meter)
INSPECTION PROCEDURE FOR GALVANIZE ERW PIPE.
1.100% Visual inspection of pipes for external defects by TPI/ESSAR.
2.Each pipe to be checked for outside dia , wall thickness,ovality and"
evel ends by TPI/ESSAR.
3.Co relation of pipes with raw material test certificate giving
chemical properties.
4.Random checking and witnessing of the various physical tests
Tensile strength, % elongation, Flattening , as per specified
Standards.
5.For check test Inspector may choose of his own discretion any pipe
randomlyfrom the lot offered for Hydro test, and eddy current test
subject to maximum 10 %In case of failure during the above tests,
rejection will be decided by Essar Engineer.
6.Each pipe to be marked as Manufacturer name and mark, Size, Weight
per"meter, Test pressure, End cap to be provided
7.Each of the pipes should be stencilled with PO no and date and colour
bands
8.Final despatch clerance will be given by Essar Engineer after review
of final inspection documents.
28006487 130 300291884 TUBE,14X20X3MM,SS,SMLS,SA269 TUBE 650 M
TYPE : HYDRAULIC
INSIDE DIAMETER : 14 MM
OUTSIDE DIAMETER : 20 MM
THICKNESS : 3 MM
MATERIAL : STAINLESS STEEL
MANUFACTURING PROCESS : SEAMLESS
SPECIFICATION : SA 269 TP 304
GRADE : SS 304
ENDS : PLAIN
* HYDRAULIC TUBE, SOLUTION ANNEALED, PICKLED, ALONG WITH PVC END CAPS.
1)QAP SHALL BE SUBMITTED TO ESSAR FOR APPROVAL BEFORE STARTING OF
MANUFACTURING.
2)ALL REQUIRED TEST AND INSPECTION WILL BE WITNESSED BY TPI OR ESSAR
3)DISPATCH CLEARANCE WILL BE GIVEN BY ESSAR AFTER REVIEWING ALL TEST
REPORTS.
PIPE,LINE,SIZE: 100 MM, INSIDE DIAMETER: 102.2 MM, OUTSIDE DIAMETER: 114.3 MM, THICKNESS: 6.02 MM, SCHEDULE: 40, ENDS: BUTT
PIPE,LINE,SIZE: 100 MM, WELD, PROCESS: SEAMLESS, MATERIAL: STAINLESS STEEL, SPECIFICATION: ASTM A 312 , GRADE: TP 304L, DIMENSION STANDARD: ASME B 24 M
36.19
PIPE,LINE,SIZE: 65 MM, INSIDE DIAMETER: 62.68 MM, OUTSIDE DIAMETER: 73 MM, THICKNESS: 5.16 MM, SCHEDULE: 40, ENDS: BEVEL,
PROCESS: SEAMLESS, MATERIAL: STAINLESS STEEL, SPECIFICATION: ASTM A312 TP 304
PIPE,LINE,SIZE: 65 MM, 24 M
UOM : M
PIPE,LINE,SIZE: 50 MM, INSIDE DIAMETER: 52.48 MM, OUTSIDE DIAMETER: 60.3 MM, THICKNESS: 3.91 MM, SCHEDULE: 40, ENDS: BEVEL,
PIPE,LINE,SIZE: 50 MM, RATING: 1.01 BAR, PROCESS: SEAMLESS, MATERIAL: STAINLESS STEEL, SPECIFICATION: ASTM A 312, GRADE: TP 304, DIMENSION 24 M
STANDARD: ASME B 36.19M