Академический Документы
Профессиональный Документы
Культура Документы
Aluminium
DS 4, DS 5 and DS 8
The DS 4, DS 5 and DS 8 series offer a
wide spectrum of conceptual possibilities
at various levels where the workpieces are
simultaneously cleaned in several chambers.
These high-performance systems are used
for blast cleaning of engine castings in
large series and also for descaling and
shot peening of rotary parts (crankshafts,
camshafts etc). Since the shot blast
machines are loaded and unloaded during
operation, the auxiliary process times can
be minimized and the output increased.
DISA Shotblast
Aluminium
Wire Mesh WM
Optimum process
technology for flat and
thin-walled castings
Desanding of flat, thin-walled and fragile
iron or aluminium alloy castings makes
specific demands on the blast cleaning
machine and the blast cleaning process
with the following requirements:
Smooth and shockless passage of parts
through the machine
Simultaneous abrasive impingement
from above and below to prevent
deformation of the parts