Академический Документы
Профессиональный Документы
Культура Документы
ADVANCED HIGH PERFORMANCE HIGH PRECISION MILL-TURN MULTI-TASKING CENTER ERFO ORMANCE O REC CISION IL TURN LL RN I TASKIN NG
Main Spindle
Hand Over
Coolant Out
Y-Axis Function
The Y-axis capability provides true milling capabilities that cannot be achieved through traditional turning center. The NT-2000SY allows 50mm travel that is sufficient for most mill/turn applications.
Coolant In
BMT65
4 Bolts to Maximize Cutting Rigidity.
VDI40
Quick Change Capability.
FEM EM
Finite Element Analysis
TORQUE
kW HP
25% 40% CONT. 20min 20min CONT. 20min 20min CONT.
15 20 11 14.8
25%
40%
CONT.
2.4 1.8
17.4 13
10
4,500 rpm
6.1 4.5
44.1 32.6
25% CONT.
25%
CONT.
1.2 0.9
8.7 6.5
10
1,200
6,000 rpm
kW HP
3.6 2.4
26 17.4
5.5 7.4
CONT.
3.7 4.9
45
1500
4500
rpm
SPECIFICATIONS
MACHINING CAPACITY
Swing Over Bed Swing Over Carriage Standard Turning diameter Max. Turing Diameter Max. Turning Length 1000mm 39.37(700mm 27.56 interference with cover) 870mm 34.25(700mm 27.56 interference with cover) 265mm 10.43 350mm 13.78 515mm 20.28 1160mm 45.67 8 A2-6 1/20 120mm 4.73 77mm 3.03 52mm(66mm) 2.05(2.06) 4500rpm 48.7kgf-m 352.25Ib-ft 0.001 6 A2-5 1/20 85mm 3.35 43mm 1.69 33mm 1.30 6000rpm 6kgf-m 43.4Ib-ft 0.001 280mm 11.02 430mm 16.93 280mm 11.02 1.57 265mm 10.43 30 0 30 260mm 10.24 580mm 22.83 100(50)mm 3.94(1.97) 600mm 23.62 11/15kW 14.8/20HP 5.5/7.5kW 7.4/10.1HP 3/3/1.8kW 4/4/2.4HP 3/3/1.8/1.8 4/4/2.4/2.4HP 1.2kW 1.6HP 1.2 1.6HP 5.5 7.4HP 5.5 7.4HP
MAIN SPINDLE Height From The Ground to Spindle Chuck Size Spindle Nose Spindle Inner Taper Spindle Front Bearing Inner Diameter Hole Through Spindle Hole Through Draw Bar Spindle Speed Max. Spindle Torque. C1-axis index Accuracy SUB SPINDLE Chuck Size Spindle Nose Spindle Inner Taper Spindle Front Bearing Inner Diameter Hole Through Spindle Hole Through Draw Bar Spindle Speed Max. Spindle Torque. C2-axis index Accuracy BOX WAY X Axis(Width) Z Axis(Width) Y Axis(Width) B Axis(Width) Bed/X/YSaddle Slant Angle MAIN TRAVEL X Axis Travel Z Axis Travel Y Axis Travel B Axis Travel MOTOR Main Spindle1 Motor Sub Spindle Motor Axis Motor(X/Z/Y/B) Turret Motor Live Tool Motor
TURRET Type Radial Turret(Servo Motor Drive,Hydraulic Clamp) Tool Magazine Capacity 12T BMT65/VDI40 Tool Standard 25(1") Standard Shank Height for Square Tool Tool Shank Dia. for Boring Bar. 40mm 1&1/2", 32mm 1&1/4"Double boring holder 686 27.01 Max. Diameter When Turret Rotation Max. Live Tool Rotation Speed 4500rpm 3.6kgf-m 26.04Ib-ft The Torque For Live Tool Spindle Tool FEED Axis Rapid Feed Rate(X/Z/Y) 20/24/10m/min 787.4/944.9/393.7ipm Axis Rapid Feed Rate(B) 7m/min 275.6ipm 20m/min 787.4ipm TAIL STOCK 90 3.54 Tail Stock Quill Diameter MT-4 Tail Stock Dead Center Quill Taper Live Center MT- 3(OPT) GENERAL 45kVA Power Consumption(Transformer) 45kVA Machine Weight 6800kg 7000kg Floor Space 341121402260mm 134.29x84.25x88.98
Note: The manufacturer reserves the right to modify the design, specifications, mechanisms,...etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
Tool Kit Work Lamp Pilot Lamp Hydraulic System Chuck Air Blast Air Gun Coolant Equipment System Tail Stock Fixed Quill(MT4 Center)(NT-2000Y) Main Spindle:8/Sub Spindle:6(NT-2000SY) Hydraulic Hollow Chuck Leveling Blocks and Bolts Complete Chip Enclosure Chuck Switch Pedal Heat Exchanger for Electrical Cabinet MechanicalElectrical and Operating Manuals CNC Controller:FANUC 18iTB Central Lubrication System Hard Jaws and Soft Jaws 1set Chip Conveyor(Right Side) X/Z Axis Feeder Safety Clutch Tool Holder Attachments
Automatic Door Safety Door Collet Chuck Foundation Screw Bolt Oil Mist Collector Soft JawsHard Jaws Oil Skimmer Paper Filter Soft Jaw Forming Ring Tail Stock Pedal Coolant Gun Parts Catcher System Work Length Setter Heavy Duty Coolant Pump(MTH2-60) Tail Stock Live Quill(MT3 Center)(NT-2000Y) Main Spindle Auto Tool Length Measurement System(RENISHAW) Sub Spindle Manual Tool Length Measurement System(RENISHAW) Bar Feeder or Only Software A.C Cooler for Electrical Cabinet Chip Conveyor(Rear Side) Milling Tool Attachments
(R R52 20 5 .67 )
2260(88.98)
1170(46.06)
1063(41.85)
1586(62.44)
5 70 ) R .76 7 (2
Left View
Front View
Top View
VMC
FP Series
PRO PRODUCT LINES
FV Series
TV Series
WV Series
WV108A, WV108B
FX Series
FX350A
NSV66A,NSV85A, NSV102A
High Precision Die Mold Vertical Machining Center
NFV Series
NFV85A, NFV102A
DCV Series
HMC
H Series
LATHES
CNC
NT Series
NT-2000SY
GT Series TC Series
INTEGRATION T AND SOLUTIONS D
Automation Solutions